Reversible addition-fragment transfer agents

In some cases the product of chain transfer (P T) is itself a transfer agent and chain transfer is reversible. Examples include alkyl iodides (Scheme 6.4) and certain addition-fragmentation transfer agents (e.g. inacromonomers and thiocarbonylthio compounds) (Scheme 6.5). 

Phosphoranyl radicals can be involved [77] in RAFT processes [78] (reversible addition fragmentation transfer) used to control free radical polymerizations [79]. We have shown [77] that tetrathiophosphoric acid esters are able to afford controlled/living polymerizations when they are used as RAFT agents. This result can be explained by addition of polymer radicals to the P=S bond followed by the selective p-fragmentation of the ensuing phosphoranyl radicals to release the polymer chain and to regenerate the RAFT agent (Scheme 41). 

To make further use of the azo-initiator, tethered diblock copolymers were prepared using reversible addition fragmentation transfer (RAFT) polymerization. Baum and co-workers [51] were able to make PS diblock copolymer brushes with either PMMA or poly(dimethylacrylamide) (PDMA) from a surface immobihzed azo-initiator in the presence of 2-phenylprop-2-yl dithiobenzoate as a chain transfer agent (Scheme 3). The properties of the diblock copolymer brushes produced can be seen in Table 1. The addition of a free initiator, 2,2 -azobisisobutyronitrile (AIBN), was required in order to obtain a controlled polymerization and resulted in the formation of free polymer chains in solution. 

Reversible addition-fragmentation transfer polymerization (RAFT) typically utilizes a dithioester transfer agent to control the concentration of propagating radicals (equation 97). ... 

The controlled emulsion polymerization of styrene using nitroxide-mediated polymerization (NMP), reversible addition-fragmentation transfer polymerization (RAFT), stable free radical polymerization (SFR), and atom transfer radical polymerization (ATRP) methods is described. The chain transfer agent associated with each process was phenyl-t-butylnitrone, nitric oxide, dibenzyl trithiocarbonate, 1,1-diphenylethylene, and ethyl 2-bromo-isobutyrate, respectively. Polydispersities between 1.17 and 1.80 were observed. 

Conversely it is possible to produce low-molar-mass oligomers or telomers by deliberately choosing an agent with a large value of Ca (e.g. methyl mercaptan, Ca 2x 10 in styrene), so that DP is reduced to 5 for a concentration of 0.001%. Further particular examples of chain transfer (e.g. to polymer to form branches) will be discussed later, together with the use of reversible-addition fragmentation transfer (RAFT) and other radical-mediated synthetic strategies. 

The other CRP process to be disclosed in the 1990 s relies on degenerative transfer of an atom or group and is best exemplified by the reversible addition-fragmentation transfer (RAFT) process that employs dithioesters as chain-transfer agents which was introduced in 1998. (17-19)... 

Controlled/ living radical polymerization (CLRP) processes are well-established synthetic routes for the production of well-defined, low-molecular weight-dispersity polymers [99]. The types of CLRP processes (initiator-transfer agent-terminator (INIFERTER), atom transfer radical polymerization (ATRP), nitroxide-mediated radical (NMRP) polymerization, reversible addition-fragmentation transfer (RAFT)) and their characteristics are described in Section 3.8 of Chapter 3 and in Section 14.8 of Chapter 14. 

It is of obvious interest to explore the use of other polymerization techniques that, being more tolerant to the experimental conditions and monomers, can produce amphiphilie azobenzene BCPs with no need for post reactions. Notably, Su et al. have reeently reported the synthesis of such an amphiphilic diblock copolymer with PAA as the hydrophilic block using reversible addition-fragmentation transfer (RAFT) polymerization (structure d in Fig. 6.2) (Su et al., 2007). Using RAFT, they prepared PAA capped with dithiobenzoate and used it as the macro-RAFT transfer agent to polymerize the hydrophobic azobenzene polymer successfully. It ean be expected that more amphiphilic azobenzene BCPs will be synthesized using the eontrolled radical polymerization techniques (ATRP and RAFT) because of their simplicity, versatility, and efficiency. 

While in most of the reports on SIP free radical polymerization is utihzed, the restricted synthetic possibihties and lack of control of the polymerization in terms of the achievable variation of the polymer brush architecture limited its use. The alternatives for the preparation of weU-defined brush systems were hving ionic polymerizations. Recently, controlled radical polymerization techniques has been developed and almost immediately apphed in SIP to prepare stracturally weU-de-fined brush systems. This includes living radical polymerization using nitroxide species such as 2,2,6,6-tetramethyl-4-piperidin-l-oxyl (TEMPO) [285], reversible addition fragmentation chain transfer (RAFT) polymerization mainly utilizing dithio-carbamates as iniferters (iniferter describes a molecule that functions as an initiator, chain transfer agent and terminator during polymerization) [286], as well as atom transfer radical polymerization (ATRP) were the free radical is formed by a reversible reduction-oxidation process of added metal complexes [287]. All techniques rely on the principle to drastically reduce the number of free radicals by the formation of a dormant species in equilibrium to an active free radical. By this the characteristic side reactions of free radicals are effectively suppressed. 

Reversible addition-fragmentation chain transfer (RAFT) polymerization using 2,2 -azobisisobutyronitrile and either A, A-dimethyl-5-thiobenzoylthiopropionamide or A-dimethyl-5-thiobenzoylthioacetamide as chain transfer agents has been used to prepare low polydispersity poly(A, A-dimethylacrylamide). The chain transfer agents were unusually effective in suppressing free radical termination reaction, thereby mimicking a living polymerization reaction. 

An alternative approach uses reversible addition-fragmentation chain transfer (RAFT), which has fewer limitations in the selection of monomers (Chong et al, 1999) so that monomers with hydroxyl, t-amino and acid functionality may be polymerized into narrow-polydispersity block copolymers. The RAFT agent is a dithioester of the general formula S=C(Z)S-R, where Z is usually -Ph (phenyl) and R is chosen from a group of alkyl phenyls (e.g. -C(CH3)2Ph). 

MAYADUNNE R.T.A., RIZZARDO E., CHIEF ARI J., CHONG Y.K., MOAD G., THANG S.H., Living radical polymerization with reversible addition-fragmentation chain transfer (RAFT polymerization) using dithiocarbamates as chain transfer agent. Macromolecules, (1999), 32 (21), 6977-80. 

The first step for the core-first stars is the synthesis of multifunctional initiators. Since it is difficult to prepare initiators that tolerate the conditions of ionic polymerization, mostly the initiators are designed for controlled radical polymerization. Calixarenes [39, 58-61], sugars (glucose, saccharose, or cyclodextrins) [62-68], and silsesquioxane NPs [28, 69] have been employed as cores for various star polymers. For the growth of the arms, mostly controlled radical polymerizations were used. There are only very rare cases of stars made from nitroxide-mediated radical polymerization (NMRP) [70] or reversible addition-fragmentation chain transfer (RAFT) techniques [71,72], In the RAFT technique one has to differentiate between approaches where the chain transfer agent is attached by its R- or Z-function. ATRP is the most frequently used technique to build various star polymers [27, 28],... 

---