Resist systems, halogenated

Other halogenated resist systems include partially chlorinated, narrow dispersity poly (vinyl-toluene). The latter differs from the CMS resist above in that chlorine is substituted on the main chain as well as on the pendant methyl group (44). 

Olefin Polymers. The flame resistance of polyethylene can be increased by the addition of either a halogen synergist system or hydrated fillers. Similar flame-retarder packages are used for polypropylene (see Olefin polymers). Typical formulations of the halogen synergist type are shown in Table 15 the fiUer-type formulations are in Table 16. 

At least two catalytic processes have been used to purify halogenated streams. Both utilize fluidized beds of probably noimoble metal catalyst particles. One has been estimated to oxidize >9000 t/yr of chlorinated wastes from a vinyl chloride monomer plant (45). Several companies have commercialized catalysts which are reported to resist deactivation from a wider range of halogens. These newer catalysts may allow the required operating temperatures to be reduced, and stiU convert over 95% of the halocarbon, such as trichlorethylene, from an exhaust stream. Conversions of C-1 chlorocarbons utilizing an Englehardt HDC catalyst are shown in Figure 8. For this system, as the number of chlorine atoms increases, the temperatures required for destmction decreases. 

---