Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Resin transfer moulding viscosity

Alcan LV63 or Martinal ON904 + 2 wt% BYK W996 Maximum dispersion viscosity for resin transfer moulding is accepted as around 1000 cps. So, under ambient conditions, these 2 dispersions are only suitable for wet press and vacuum moulding. Source of data Ashland Specialty Chemicals ... [Pg.80]

A one part, low viscosity epoxy resin for resin transfer moulding or resin infusion, if necessary at room temperature. [Pg.128]

A low viscosity epoxy designed for vacuum bag and resin transfer moulding. [Pg.139]

General purpose, low viscosity, solvent-free, two-component MDI-based liquid systems for resin transfer moulding offering fast reaction times, high flexural modulus and outstanding impact resistance at high and low temperatures with or without glass addition. [Pg.149]

An unaccelerated, low viscosity, chemical and heat resistant polyester for resin transfer moulding. [Pg.156]

A two component, low viscosity epoxy system developed for resin transfer moulding. [Pg.327]

Saeki and Kaneda (1988) examined the apparent mean viscosity, minimum viscosity and apparent gel time of an epoxy-resin moulding compound during the transfer-moulding operation by using an instrumented transfer mould. [Pg.363]


See other pages where Resin transfer moulding viscosity is mentioned: [Pg.3]    [Pg.100]    [Pg.49]    [Pg.691]    [Pg.322]    [Pg.80]    [Pg.32]    [Pg.41]    [Pg.649]    [Pg.775]    [Pg.649]    [Pg.775]    [Pg.649]    [Pg.775]    [Pg.102]    [Pg.320]    [Pg.139]    [Pg.399]   


SEARCH



Moulding resins

Resin transfer

Resin transfer moulding mould

Resin viscosity

Transfer moulding

© 2024 chempedia.info