Reinforcement geotextiles reinforcing function

In order for it to perform the reinforcement function, the geotextile must be allowed to deform to develop its strength. When stabilization of a site occurs, there is consolidation of the soil, and with tbis comes deformation of the geotextile. Due to the deformation of the geotextile, strength is required to ensure that a site failure does not occur, ie, there can be a reinforcement component in the stabilization process. 

The improvement in the performance of a pavement attributable to the inclusion of geotextiles comes mainly from their separation and reinforcing functions. This can be assessed in terms of either an improved system performance (e.g. reduction in deformation or increase in traffic passes before failure) or reduced aggregate thickness requirements (where reductions of the order 25-50% are feasible for low-strength subgrade conditions with suitable geotextiles). 

The reinforcing function of geotextUes is one of the most used in geotechnical engineering. Soils have much lower resistance to tensile forces than they do to compressive forces. Embedding a suitable geotextile within the... 

For the geotextile to provide an effective reinforcement function, it should have not only a high tensile strength, but also a high tensile modulus so that its resistance to tensile loads generated within the soil occurs at sufficiently small strains to prevent excessive movement of the reinforced soil structure. It is self-evident that decreases in these properties with time (i.e. creep behaviour) must be low, and that the polymers used should have resistance to degradation by the soil. An estimate of the anticipated reduction in strength can be determined from an analysis of creep strain versus time plots for various stress levels and a suitable reduction factor applied. 

Fabrics perform one or more function in each installation generally there is one primary function. The five basic primary functions have been identified as separation, stabili2ation, reinforcement, filtration, and drainage. When the geotextile is impregnated with an impermeable material such as an asphaltic... 

---