Saving regions

Correction, Window Function (Exponential LB = 1.0 Hz) and FT. In the frequency domain select Phase Correction (6th Order), Peak Picking (positive Peaks only X Range whole Spectrum) of the whole region. Save Spectrum (set Processing Number Increment = 1) and Plot Spectrum (set the plot parameters according to your preferences). Execute the automatic processing and if you are satisfied with the result, store this job for processing 1D C raw data as C.JOB. 

Less material use by removing thick, unnecessary regions savings of material costs. 

The supply for helium carrier gas for GC-MS became increasingly difficult and expensive in many regions. Saving helium carrier gas is especially important with... 

Molecules can be rendered as stick figures, ball and stick, CPK, and ribbons. Dot surfaces can also be included. Some regions were incorrectly shaded for small molecules on our test system running at 800 x 600 resolution with 24-bit color. The display uses a black background, but graphics are saved or printed with a white background. Overall, the rendering is adequate. 

For a conformation in a relatively deep local minimum, a room temperature molecular dynamics simulation may not overcome the barrier and search other regions of conformational space in reasonable computing time. To overcome barriers, many conformational searches use elevated temperatures (600-1200 K) at constant energy. To search conformational space adequately, run simulations of 0.5-1.0 ps each at high temperature and save the molecular structures after each simulation. Alternatively, take a snapshot of a simulation at about one picosecond intervals to store the structure. Run a geometry optimization on each structure and compare structures to determine unique low-energy conformations. 

Combined air curtains with indoor air cut down expenses due to rational utilization of energy by the heated jets. Thermal energy savings are 25-60% depending on the dimensions of the gate and climatic region, and the reduction in expenditures is 30-70%. 

With small plants using batch processes this may not be the best policy. Just as there is a maximum size for standard equipment, there is a size below which the cost is almost constant. In this case, it may be more economical to buy larger equipment and save on manpower by having only one shift of workers. Often, in this low-volume region, by using larger equipment the same number of operators can process three times as much material. 

Blum P., Campillo G., Miinch W., Kolbel T. (2010). C02 savings of ground source heat pump systems-a regional analysis. Renewable Energy, 35(1), 122-127. 

---