Redox reactions, metal species

Histidine, glutamate, aspartate, and lysine side chains accessible on the protein surface have been used as sites for modification by redox-active metal species. The original modification procedure involved direct reaction... 

The last type of metallic electrode is the redox indicator electrode. This electrode is made of Pt, Pd, Au, or other inert metals, and serves to measure redox reactions for species in solution (e.g., Fe /Fe, Ce /Ce" ). These electrodes are often used to detect the endpoint in potentiometric titrations. Electron transfer at inert electrodes is often not reversible, leading to nonreproducible potentials. Although not a metal electrode, it should be remembered that carbon electrodes are also used as redox indicator electrodes, because carbon is also not electroactive at low applied potentials. 

The last type of metallic electrode is the redox indicator electrode. This electrode is made of Pt, Pd, Au, or other inert metals and serves to measure redox reactions for species in solution... 

The most important types of reactions are precipitation reactions, acid-base reactions, metal-ligand complexation reactions, and redox reactions. In a precipitation reaction two or more soluble species combine to produce an insoluble product called a precipitate. The equilibrium properties of a precipitation reaction are described by a solubility product. 

A series of divalent lanthanide metal metaHaborane derivatives have been prepared by the redox reaction of metallic lanthanides and boron hydrides and by the metathesis reaction of boron hydride salts with LnCl2 where Ln = Sm, Eu, Yb (181,182). The species (CH3CN)3Yb[(p.-H)2B2QH22],... 

Another common type of reaction in aqueous solution involves a transfer of electrons between two species. Such a reaction is called an oxidation-reduction or redox reaction. Many familiar reactions fit into this category, including the reaction of metals with acid. 

While these calculations provide information about the ultimate equilibrium conditions, redox reactions are often slow on human time scales, and sometimes even on geological time scales. Furthermore, the reactions in natural systems are complex and may be catalyzed or inhibited by the solids or trace constituents present. There is a dearth of information on the kinetics of redox reactions in such systems, but it is clear that many chemical species commonly found in environmental samples would not be present if equilibrium were attained. Furthermore, the conditions at equilibrium depend on the concentration of other species in the system, many of which are difficult or impossible to determine analytically. Morgan and Stone (1985) reviewed the kinetics of many environmentally important reactions and pointed out that determination of whether an equilibrium model is appropriate in a given situation depends on the relative time constants of the chemical reactions of interest and the physical processes governing the movement of material through the system. This point is discussed in some detail in Section 15.3.8. In the absence of detailed information with which to evaluate these time constants, chemical analysis for metals in each of their oxidation states, rather than equilibrium calculations, must be conducted to evaluate the current state of a system and the biological or geochemical importance of the metals it contains. 

Electron-transfer reactions occur all around us. Objects made of iron become coated with mst when they are exposed to moist air. Animals obtain energy from the reaction of carbohydrates with oxygen to form carbon dioxide and water. Turning on a flashlight generates a current of electricity from a chemical reaction in the batteries. In an aluminum refinery, huge quantities of electricity drive the conversion of aluminum oxide into aluminum metal. These different chemical processes share one common feature Each is an oxidation-reduction reaction, commonly called a redox reaction, in which electrons are transferred from one chemical species to another. 

PEMFC)/direct methanol fuel cell (DMFC) cathode limit the available sites for reduction of molecular oxygen. Alternatively, at the anode of a PEMFC or DMFC, the oxidation of water is necessary to produce hydroxyl or oxygen species that participate in oxidation of strongly bound carbon monoxide species. Taylor and co-workers [Taylor et ah, 2007b] have recently reported on a systematic study that examined the potential dependence of water redox reactions over a series of different metal electrode surfaces. For comparison purposes, we will start with a brief discussion of electronic structure studies of water activity with consideration of UHV model systems. 

Addition of either nucleophilic or electrophilic metallic species can result in the capping of triangular- or square-metal faces in carbonyl clusters. These redox reactions provide high yield syntheses of higher nuclearity clusters and somewhat resemble surface reconstruction on metals. With a few examples,... 

Dithiophosphato metal complexes are usually prepared by metathesis of metal halides with alkali metal or ammonium salts. A convenient method uses the redox reaction of his th iophosphory 1 )d is ulfanes (RO)2(S)PSSP(S)(OR)2, with metal species in low oxidation states resulting in the insertion of the metal into the sulfur-sulfur bond.24 Recently it was used for the synthesis of long alkyl chain, liquid platinum(II) dithiophosphates25 and for the synthesis of Ru (CO)2[S2P(OPr%]2 from Ru3(CO)i2 with (Pr 0)2(S)PSSP(S)(0Pr,)2.26... 

Redox reactions involving nitric oxide have important implications beyond their fundamental chemistry as demonstrated by the controversy in the biomedical literature regarding conditions under which generation of NO leads to the amelioration or the exacerbation of oxidative stress in mammalian systems (95). Oxidative stress is defined as a disturbance in the balance between production of reactive oxygen species (pro-oxidants) and antioxidant defenses (96). Reactive oxygen species include free radicals and peroxides as well as other reactants such as oxidative enzymes with metal ion sites in high oxidation states. The... 

The general features discussed so far can explain the complexity of these reactions alone. However, thermodynamic and kinetic couplings between the redox steps, the complex equilibria of the metal ion and/or the proton transfer reactions of the substrate(s) lead to further complications and composite concentration dependencies of the reaction rate. The speciation in these systems is determined by the absolute concentrations and the concentration ratios of the reactants as well as by the pH which is often controlled separately using appropriately selected buffers. Perhaps, the most intriguing task is to identify the active form of the catalyst which can be a minor, undetectable species. When the protolytic and complex-formation reactions are relatively fast, they can be handled as rapidly established pre-equilibria (thermodynamic coupling), but in any other case kinetic coupling between the redox reactions and other steps needs to be considered in the interpretation of the kinetics and mechanism of the autoxidation process. This may require the use of comprehensive evaluation techniques. 

The conversion of hydroperoxide/peroxide to superoxide is a one-electron redox reaction and requires the presence of transition metals having accessible multiple oxidation states as in biological iron or manganese clusters (e.g., Fe(II, III, IV) clusters of monooxygenase or the Mn(II, HI, IV) clusters of photosystems). Ti is usually not reduced at ambient temperatures. The various possibilities that could facilitate the transformation of hydroperoxo/peroxo to superoxo species are as follows ... 

A metallic electrode consisting of a pure metal in contact with an analyte solution develops an electric potential in response to a redox reaction occurring at its metal surface. Common metal electrodes such as platinum, gold, palladium or carbon are known as inert metal electrodes whose sole function is to transfer electrons to or from species in solution. Metal electrodes corresponding to the first kind are pure metal electrodes such as Ag, Hg and others that respond directly to a change in activity of the metal cation in the solution. For example, for the reaction... 

Another way to determine what is undergoing oxidation and what is undergoing reduction is by looking at the change in oxidation numbers of the reactant species. Oxidation occurs when there is an increase in oxidation number. In the example above, the Zn metal went from an oxidation state of 0 to +2. Reduction occurs when there is a decrease in oxidation number. Cu2+ went from an oxidation state of +2 to 0. In order to determine if a particular reaction is a redox reaction, determine the oxidation numbers of each element in the reaction. If at least one element changes oxidation number, it is a redox reaction. Refer to your textbook for rules in assigning oxidation numbers. 

Here we presented two general aspects of the interactions between superoxide and metal centers. One is the catalytic decomposition of superoxide by non-heme metal centers (Scheme 9) and the role of the ligand structure in it, and another is the reversible binding of superoxide to the heme metal center and the nature of the product metal(lll)-peroxo species (Scheme 17). In both cases through the same redox reaction steps a metal(III)-peroxo species is formed as the intermediate (Scheme 9), in the catalytic cycle, or the product of stoichiometric reaction (Scheme 17). The crucial difference is in the protonation step. If the protonation of peroxo species is followed by efficient release of hydrogen peroxide (and not 0-0 bond cleavage,... 

The first class includes non-redox reactions like isomerisation, dimerisation or oligomerisation of unsaturated compounds, in which the role of the catalyst lies in governing the kinetic and the selectivity of thermodynamically feasible processes. Electrochemistry associated to transition metal catalysis has been first used for that purpose, as a convenient alternative to the usual methods to generate in situ low-valent species which are not easily prepared and/or handled [3]. These reactions are not, however, typical electrochemical syntheses since they are not faradaic they will not be discussed in this review. 

Redox reactions usually lead, however, to a marked change in the species, as reactions 4-6 indicate. Important reactions involve the oxidation of organic and metalloprotein substrates (reactions 5 and 6) by oxidizing complex ions. Here the substrate often has ligand properties, and the first step in the overall process appears to be complex formation between the metal and substrate species. Redox reactions will often then be phenomenologically associated with substitution. After complex formation, the redox reaction can occur in a variety of ways, of which a direct intramolecular electron transfer within the adduct is the most obvious. 

---