Redox ion exchangers

The developments on chelating, amphoteric and redox ion-exchange resins, and applications of ion-exchange resins which are not covered in this review will be discussed in a later publication. 

These modifiers are classified by the type of polymer (5). To this end, four classes are identified redox, ion-exchange, conductive, and nonconductive, as shown in Figure 8.15. The first three classes of polymers are able to participate in electron transfer events the distinction between them lies in the mode of electron-transport that dominates their observed behavior, as shown in Figure 8.16 (4). Nonconducting polymers are used to create selective physical barriers or for surface passivation (118). 

Many experimental approaches have been appHed to the deterrnination of stabihty constants. Techniques include pH titrations, ion exchange, spectrophotometry, measurement of redox potentials, polarimetry, conductometric titrations, solubiUty deterrninations, and biological assay. Details of these methods can be found in the Hterature (9,10). 

FP) in the aqueous phase. Subsequent separation of U and Pu depends on their differing redox properties (Fig. 31.3). The separations are far from perfect (see p. 1097), and recycling or secondary purification by ion-exchange techniques is required to achieve the necessary overall separations. 

The studies by Biermann et al. [28] indicate that the carbon blacks used as the conductive matrix in Leclanche cells remain chemically inert, that is, they do not undergo oxidation during storage or discharge of the cell. However, Caudle et al. [29] found evidence that the ion-exchange properties of carbon black, which exist because of the presence of surface redox groups, are responsible for electrochemical interactions with Mn02. The extent of MnO, reduction to MnOOH depends on the carbon black (i.e., furnace black > acetylene black). 

It is now 20 years since the first report on the electrochemistry of an electrode coated with a conducting polymer film.1 The thousands of subsequent papers have revealed a complex mosaic of behaviors arising from the multiple redox potentials and the large changes in conductivity and ion-exchange properties that accompany their electrochemistry. 

A very similar idea is the use of ion exchanging polymers into which redox active ions can be incorporated by equilibration with an adherent solution. Sulfonated perfluoro polymers (Nafion), polyvinylsulfonic acid , and polystyrene... 

Polynuclear transition metal cyanides such as the well-known Prussian blue and its analogues with osmium and ruthenium have been intensely studied Prussian blue films on electrodes are formed as microcrystalline materials by the electrochemical reduction of FeFe(CN)g in aqueous solutionThey show two reversible redox reactions, and due to the intense color of the single oxidation states, they appear to be candidates for electrochromic displays Ion exchange properties in the reduced state are limited to certain ions having similar ionic radii. Thus, the reversible... 

In the theoretical treatment of ion exchange polymers the roles of charge propagation and of migration of ions were further studied by digital simulation. Another example of proven 3-dimensional redox catalysis of the oxidation of Ks[Fe(CN)5] at a ruthenium modified polyvinylpyridine coated electrode was reported... 

The isomorphic substituted aluminum atom within the zeolite framework has a negative charge that is compensated by a counterion. When the counterion is a proton, a Bronsted acid site is created. Moreover, framework oxygen atoms can give rise to weak Lewis base activity. Noble metal ions can be introduced by ion exchanging the cations after synthesis. Incorporation of metals like Ti, V, Fe, and Cr in the framework can provide the zeolite with activity for redox reactions. 

Platinum catalysts were prepared by ion-exchange of activated charcoal. A powdered support was used for batch experiments (CECA SOS) and a granular form (Norit Rox 0.8) was employed in the continuous reactor. Oxidised sites on the surface of the support were created by treatment with aqueous sodium hypochlorite (3%) and ion-exchange of the associated protons with Pt(NH3)42+ ions was performed as described previously [13,14]. The palladium catalyst mentioned in section 3.1 was prepared by impregnation, as described in [8]. Bimetallic PtBi/C catalysts were prepared by two methods (1) bismuth was deposited onto a platinum catalyst, previously prepared by the exchange method outlined above, using the surface redox reaction ... 

Figure 2. TEM images of PtBi/C catalysts prepared by (a) ion exchange/surface redox reaction, and (b) coimpregnation.

Providing an ion exchanger with a sufficient number of redox groups so that conduction can occur by a relay-type redox-change mechanism. Examples are hydroquinone-derived redox polymers and polyvinyl polymers with a tetrathia-fulvalene, ferrocene, or carbazole group, which have been found useful for research and analytical applications. 

It is worth mentioning that both the carboxylation of epoxides and anilines are acid-base reactions, which do not entail redox processes. Therefore a catalyst active in these reactions must provide acid-base functionality. In this perspective, positively charged gold could be the real player, although a co-catalytic or promotion effect of ze-rovalent gold could also be important. Therefore the catalysts for the oxidative carbonylation of aniline, supported on Merck Ion-exchanger IV, could be actually bifunctional. On one side, Au could catalyze the oxidation of CO with O2 to CO2, a reaction for which it is... 

The redox active polymer films might bear the mediator group attached either covalently to the polymer backbone (polyvinylferrocene, Ru(II) complexes of polyvinylpyridine, etc.) or electrostatically within the ion-exchange polymer (e.g. in Nation, cf. Section 2.6). 

It is well known that Rh(I) complexes can catalyze the carbonylation of methanol. A heterogenized catalyst was prepared by ion exchange of zeolite X or Y with Rh cations.126 The same catalytic cycle takes place in zeolites and in solution because the activation energy is nearly the same. The specific activity in zeolites, however, is less by an order of magnitude, suggesting that the Rh sites in the zeolite are not uniformly accessible. The oxidation of camphene was performed over zeolites exchanged with different metals (Mn, Co, Cu, Ni, and Zn).127 Cu-loaded zeolites have attracted considerable attention because of their unique properties applied in catalytic redox reactions.128-130 Four different Cu sites with defined coordinations have been found.131 It was found that the zeolitic media affects strongly the catalytic activity of the Cd2+ ion sites in Cd zeolites used to catalyze the hydration of acetylene.132... 

In some applications, additional components acting as reactors for specific chemical pretreatment are incorporated within the flow manifold. Typical examples are ion-exchange microcolumns for preconcentration of the analyte or removal of interferences and redox reactors, which are used either to convert the analyte into a more suitable oxidation state or to produce online an unstable reagent. Typical examples of online pretreatment are given in Table 2. Apart from these sophisticated reactors, a simple and frequently used reactor is a delay coil (see also Fig. 4), which may be formed by knitting a segment of the transfer line. This coil allows slow CL reactions to proceed extensively and enter into the flow cell at the time required for maximum radiation. The position of the reactors within the manifold is either before or after the injection port depending on the application. 

---