Reactivity thermogravimetric analysis

Chemical reactivity test data produced by employers or obtained from other sources (e.g., differential scanning calorimetry, thermogravimetric analysis, accelerating rate calorimetry). 

The PSI element of both the OSHA PSM Standard and the EPA RMP regulation can be improved by requiring the inclusion of all existing information on chemical reactivity. Examples of such information are chemical reactivity test data, such as DSC, thermogravimetric analysis (TGA), or accelerating rate calorimetry and relevant incident reports from the plant, the corporation, industry, and government. OSHA and EPA should require the facility to consult such resources as Bretherick s Handbook of Reactive Chemical Hazards,Sax s Dangerous Properties of Industrial Materials, and computerized tools (e g., CHETAH, The Chemical Reactivity Work Sheet). 

Early devices fbr thermogravimetric analysis were limited in precision and convenience when compared with DTA or DSC equipment. Now devices for simultaneous DSC and TG are on the market which can operate at high temps in reactive atms permitting the simulation of high temp reactions on a micro scale. The use of TG for the study of reaction kinetics was described in Sect 5.3.3. An exptl study of the sublimation of ammonium perchlorate was published by Jacobs and Jones (Ref 25). Similar techniques should find application in the study of other propint systems. The product gases have been collected for further analysis using gas chromatography and mass spectrometry... 

The reaction between toluene 2,4-diisocyanate and carboxylated MWCNTs afforded amido-functionalized nanotubes containing highly reactive isocyanate groups on their surface (Scheme 1.4). The amount of the isocyanate groups was determined by chemical titration and thermogravimetric analysis (TGA) [105]. The modified tubes may constitute promising components to prepare polymer-nanotube composites and coatings [106]. 

The fundamental research work was subvided into 3 parts [ 6o ] - thermogravimetric analysis (TGA) and differential thermal analysis (PTA) of minute samples (5 50 mg) of the material to be studied. Both techniques yield information on the rate of thermal decomposition, the heat of reaction, the kinetic parameters of this process (pseudo-order and activation energy) and the amount of residue. The analysis of the evolving product has been monitored by means of gas chromatography. High temperature oxidation of the residue allows to compare the reactivity of the carbonized residue. ... 

As a resnlt of this and further studies by thermogravimetric analysis (TGA), solid-state NMR and electron probe microanalysis, Dabrowski and co-workers [27] conclude that melamine polyphosphate is an efficient flame retardant additive in polyamide-6,6 (glass fibre reinforced or not). The glass fibres are shown to strongly inflnence the fire performance of the intumescent FR material. A reactivity between the additive and the glass fibre and the formation of alumino-phosphates was demonstrated. These species might be responsible for the improvement of the FR behaviour particularly in the conditions of the LOI test. 

---