Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Reactive liquid composite molding

The latest trend in foamed composites is automotive structural parts produced by the SRIM (structural reaction-injection-molding) process. The SRIM process is a method of the reactive liquid injection molding (i.e., LIM). LIM includes RIM (reaction injection molding), RRIM (reinforced RIM) and RTM (resin transfer molding). IX M (Liquid Composite Molding) is a relatively new technical term which includes SRIM, RRIM and RTM (Resin Transfer Molding). [Pg.169]

Reactive Melt Polymerization. The liquid composite molding (LCM) method is established for the fahricarion of thermosets. In contrast, reac-rive thermoplastic LCM processes are developed to only a few engineering polymers. The technique was applied to low-melting PA 6T/6I oligo-... [Pg.401]

Figure 16.1 Polyurethane composites of nano-HA (a) and (b), commercially available MasterGrafpM (MG) (c), and bioglass fabricated via electro spinning (a), foaming (b) and (d), and in situ reactive liquid molding (c). Figure 16.1 Polyurethane composites of nano-HA (a) and (b), commercially available MasterGrafpM (MG) (c), and bioglass fabricated via electro spinning (a), foaming (b) and (d), and in situ reactive liquid molding (c).
See other pages where Reactive liquid composite molding is mentioned: [Pg.308]    [Pg.308]    [Pg.653]    [Pg.654]    [Pg.162]    [Pg.482]    [Pg.482]    [Pg.204]    [Pg.3]    [Pg.100]    [Pg.129]    [Pg.288]    [Pg.213]    [Pg.73]    [Pg.135]   
See also in sourсe #XX -- [ Pg.308 ]



SEARCH



Compositions molding

Liquid Composite Molding

Liquid composition

Liquid molding

Reactive liquids

Reactive molding

© 2024 chempedia.info