Surface information Raman spectroscopy

Raman Spectroscopy provides information comparable to that obtained by FTIR. The sample is illuminated by a laser beam (visible light), and the light dispersed from the sample (Raman effect) [46] is analyzed. The frequency differences between the light dispersed and that of the initial laser beam reflect the various functional groups of surface and solution species. This method can also be used... 

Analysis of Surface Molecular Composition. Information about the molecular composition of the surface or interface may also be of interest. A variety of methods for elucidating the nature of the molecules that exist on a surface or within an interface exist. Techniques based on vibrational spectroscopy of molecules are the most common and include the electron-based method of high resolution electron energy loss spectroscopy (hreels), and the optical methods of ftir and Raman spectroscopy. These tools are tremendously powerful methods of analysis because not only does a molecule possess vibrational modes which are signatures of that molecule, but the energies of molecular vibrations are extremely sensitive to the chemical environment in which a molecule is found. Thus, these methods direcdy provide information about the chemistry of the surface or interface through the vibrations of molecules contained on the surface or within the interface. 

Raman spectroscopy is a very convenient technique for the identification of crystalline or molecular phases, for obtaining structural information on noncrystalline solids, for identifying molecular species in aqueous solutions, and for characterizing solid—liquid interfaces. Backscattering geometries, especially with microfocus instruments, allow films, coatings, and surfaces to be easily measured. Ambient atmospheres can be used and no special sample preparation is needed. 

Raman spectroscopy has provided information on catalytically active transition metal oxide species (e. g. V, Nb, Cr, Mo, W, and Re) present on the surface of different oxide supports (e.g. alumina, titania, zirconia, niobia, and silica). The structures of the surface metal oxide species were reflected in the terminal M=0 and bridging M-O-M vibrations. The location of the surface metal oxide species on the oxide supports was determined by monitoring the specific surface hydroxyls of the support that were being titrated. The surface coverage of the metal oxide species on the oxide supports could be quantitatively obtained, because at monolayer coverage all the reactive surface hydroxyls were titrated and additional metal oxide resulted in the formation of crystalline metal oxide particles. The nature of surface Lewis and Bronsted acid sites in supported metal oxide catalysts has been determined by adsorbing probe mole-... 

Among the techniques mentioned previously, XPS has the greatest impact on polymer surface analysis. A major additional source of chemical information from polymers comes from IR and Raman spectroscopy methods, These vibrational data can be obtained from the bulk and the surface region, although the information depth is much greater than with AES, XPS, or ISS. 

This review will endeavor to outline some of the advantages of Raman Spectroscopy and so stimulate interest among workers in the field of surface chemistry to utilize Raman Spectroscopy in the study of surface phenomena. Up to the present time, most of the work has been directed to adsorption on oxide surfaces such as silicas and aluminas. An examination of the spectrum of a molecule adsorbed on such a surface may reveal information as to whether the molecule is physically or chemically adsorbed and whether the adsorption site is a Lewis acid site (an electron deficient site which can accept electrons from the adsorbate molecule) or a Bronsted acid site (a site which can donate a proton to an adsorbate molecule). A specific example of a surface having both Lewis and Bronsted acid sites is provided by silica-aluminas which are used as cracking catalysts. 

Though as yet in its infancy, the application of laser Raman spectroscopy to the study of the nature of adsorbed species appears certain to provide unusually detailed information on the structure of oxide surfaces, the adsorptive properties of natural and synthetic zeolites, the nature of adsorbate-adsorbent interaction, and the mechanism of surface reactions. 

The vibrations of molecular bonds provide insight into bonding and stmcture. This information can be obtained by infrared spectroscopy (IRS), laser Raman spectroscopy, or electron energy loss spectroscopy (EELS). IRS and EELS have provided a wealth of data about the stmcture of catalysts and the bonding of adsorbates. IRS has also been used under reaction conditions to follow the dynamics of adsorbed reactants, intermediates, and products. Raman spectroscopy has provided exciting information about the precursors involved in the synthesis of catalysts and the stmcture of adsorbates present on catalyst and electrode surfaces. 

In recent years,3 4 however, there has been renewed interest in the study of the electrode/solution interface due in part to the development of new spectroscopic techniques such as surface-enhanced Raman spectroscopy,5-7 electrochemically modulated infrared reflectance spectroscopy and related techniques,8,9 second-harmonic generation,10-12 and others which give information about the identity and orientation of molecular species in the interfacial... 

Fortunately, in favorable cases enhancement mechanisms operate which increase the signal from the interface by a factor of 105 — 106, so that spectra of good quality can be observed - hence the name surface-enhanced Raman spectroscopy (SERS). However, these mechanisms seem to operate only on metals with broad free-electron-like bands, in particular on the sp metals copper, silver and gold. Furthermore, the electrodes must be roughened on a microscopic scale. These conditions severely limit the applicability of Raman spectroscopy to electrochemical interfaces. Nevertheless, SERS is a fascinating phenomenon, and though not universally applicable, it can yield valuable information on many interesting systems, and its usefulness is expected to increase as instrumentation and preparation techniques improve. 

A major emerging area of research activity in interfacial electrochemistry concerns the development of in-situ surface spectroscopic methods, especially those applicable in conventional electrochemical circumstances. One central objective is to obtain detailed molecular structural information for species within the double layer to complement the inherently macroscopic information that is extracted from conventional electrochemical techniques. Vibrational spectroscopic methods are particularly valuable for this purpose in view of their sensitivity to the nature of intermolecular interactions and surface bonding as well as to molecular structure. Two such techniques have been demonstrated to be useful in electrochemical systems surface-enhanced Raman spectroscopy... 

Compared with IR and Raman spectroscopies, ultraviolet-visible (UV-Vis) spectroscopy has had only limited use in heterogeneous catalysis. Nevertheless, this spectroscopy can provide information on concentration changes of organic compounds dissolved in a liquid phase in contact with a solid catalyst, be used to characterize adsorbates on catalytic surfaces, provide information on the... 

In addition to the indirect experimental evidence coming from work function measurements, information about water orientation at metal surfaces is beginning to emerge from recent applications of a number of in situ vibrational spectroscopic techniques. Infrared reflection-absorption spectroscopy, surface-enhanced Raman scattering, and second harmonic generation have been used to investigate the structure of water at different metal surfaces, but the pictures emerging from all these studies are not always consistent, partially because of surface modification and chemical adsorption, which complicate the analysis. 

Many of the characterization techniques described in this chapter require ambient or vacuum conditions, which may or may not be translatable to operational conditions. In situ or in opemndo characterization avoids such issues and can provide insight and information under more realistic conditions. Such approaches are becoming more common in X-ray adsorption spectroscopy (XAS) methods ofXANES and EXAFS, in NMR and in transmission electron microscopy where environmental instruments and cells are becoming common. In situ MAS NMR has been used to characterize reaction intermediates, organic deposits, surface complexes and the nature of transition state and reaction pathways. The formation of alkoxy species on zeolites upon adsorption of olefins or alcohols have been observed by C in situ and ex situ NMR [253]. Sensitivity enhancement techniques play an important role in the progress of this area. In operando infrared and RAMAN is becoming more widely used. In situ RAMAN spectroscopy has been used to online monitor synthesis of zeolites in pressurized reactors [254]. Such techniques will become commonplace. 

---