Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Quinones cycloadditions

Gilbert, A. (2004) 1,4-Quinone Cycloaddition Reactions with Alkenes, Alkynes, and Related Compounds, in CRC Handbook of Organic Photochemistry and Photobiology, 2nd edn (eds F. Lenci and W.M. Horspool), CRC Press, New York, pp. 87-1-87-12. [Pg.208]

Borrmann A, Fatunsin O, Dommerholt J et al (2015) Strain-promoted oxidation-controlled cyclooctyne-l,2-quinone cycloaddition (SPOCQ) for fast and activatable protein conjugation. Bio-conj Chem 26 257-261... [Pg.77]

Quinone Cycloaddition Reactions with Alkenes, Alkynes, and Related Compounds... [Pg.1745]

Creed, D., 1,4-Quinone cycloaddition reactions with alkene, alkynes and related compounds, in CRC Handbook of Organic Photochemistry and Photobiology, Horspool, W. M. and Song, P.-S., Eds., CRC Press, Boca Raton, FL, 1995, 280. [Pg.1754]

Within the cubane synthesis the initially produced cyclobutadiene moiety (see p. 329) is only stable as an iron(O) complex (M. Avram, 1964 G.F. Emerson, 1965 M.P. Cava, 1967). When this complex is destroyed by oxidation with cerium(lV) in the presence of a dienophilic quinone derivative, the cycloaddition takes place immediately. Irradiation leads to a further cyclobutane ring closure. The cubane synthesis also exemplifies another general approach to cyclobutane derivatives. This starts with cyclopentanone or cyclohexane-dione derivatives which are brominated and treated with strong base. A Favorskii rearrangement then leads to ring contraction (J.C. Barborak, 1966). [Pg.78]

Unexpectedly, a completely different reaction took place in the oxidation of 2-(l-propenyl)phenol (111) with PdCh. Carpanone (112) was obtained in one step in 62% crude yield. This remarkable reaction is explained by the formation of o-quinone, followed by the radical coupling of the side-chain. Then the intramolecular cycloaddition takes place to form carpanone[131]. [Pg.36]

Photochemical Reactions. Increased knowledge of the centraUty of quinone chemistry in photosynthesis has stimulated renewed interest in their photochemical behavior. Synthetically interesting work has centered on the 1,4-quinones and the two reaction types most frequentiy observed, ie [2 A 2] cycloaddition and hydrogen abstraction. Excellent reviews of these reactions, along with mechanistic discussion, are available (34,35). [Pg.408]

The addition of p-quinone to enamines normally produces furan derivatives, especially when the enamine possesses a 3 hydrogen (see Section III. A). 1,2 Cycloaddition is claimed to take place to give a cyclobutane derivative when p-quinone and an enamine with no jS hydrogens are allowed to react at low temperatures (51). However, little evidence is reported to verify this structural assignment, and the actual structure probably is a benzofuranol (52). Reaction of a dienamine (formed in situ) with p-quinone in the presence... [Pg.221]

Adduct 100 is formed from the 1,4 cycloaddition of o-quinone (99) with the morpholine enamine of cyclohexanone (125). Treatment of styrene oxide with cyclic enamines at elevated temperatures (about 230°C) produces O.N-ketals possessing a furan nucleus (125a). [Pg.235]

The reaction of isobenzofuroxan (131) with the morpholine enamine of cyclohexanone results in a 1,4 cycloaddition to form quinoxaline-di-N-oxide 132 (777). Quinone dibenzenesulfonimide has been found to undergo... [Pg.242]

Different azanthraquinones 390-392 were prepared from 3-amino-4-imino-4//-pyrido[l,2-a]pyrazines 373 with 1,4-quinones in one pot reactions via [4-1-2] cycloaddition and the subsequent ring transformation (Scheme 9) (97T5455). [Pg.315]

Other interesting three-component cycloadditions are the following Sulfur dioxide and diazo compounds lead to episulfones (equation 75)436—in a special case to 4,5-dihydrothiepine S,S-dioxides437 sulfur dioxide, ketene, and arylimine lead to thiazole derivatives438 (equation 76) sulfur dioxide, quinone, and alkenes lead to benzoxathiane derivatives439 (equation 77). [Pg.214]

Aromatic fluoro-compounds have been prepared by thermal cycloaddition of fluorinated 1,3-butadienes 10-12 (Figure 2.1) with several dienophiles. Fluorophenols were obtained by cycloaddition of diene 10 with quinones [11]... [Pg.33]

Aminodienylesters. I the cycloaddition reactions of ferf-aminodienylester with a,p-unsaturated carbonyl compounds, styrenes and quinones [148]... [Pg.88]

The use of ultrasonic (US) radiation (typical range 20 to 850 kHz) to accelerate Diels-Alder reactions is undergoing continuous expansion. There is a parallelism between the ultrasonic and high pressure-assisted reactions. Ultrasonic radiations induce cavitation, that is, the formation and the collapse of microbubbles inside the liquid phase which is accompanied by the local generation of high temperature and high pressure [29]. Snyder and coworkers [30] published the first ultrasound-assisted Diels-Alder reactions that involved the cycloadditions of o-quinone 37 with appropriate dienes 38 to synthesize abietanoid diterpenes A-C (Scheme 4.7) isolated from the traditional Chinese medicine, Dan Shen, prepared from the roots of Salvia miltiorrhiza Bunge. [Pg.154]

The cycloadditions of cyclopentadiene 1 and its spiro-derivatives 109 and 110 with quinones 52, 111 and 112 (Scheme 4.20), carried out in water at 30 °C in the presence of 0.5% mol. of cetyltrimethylammonium bromide (CTAB), gave the endo adduct in about 3 h with good yield [72b]. With respect to the thermal Diels-Alder reaction, the great reaction rate enhancement in micellar medium (Scheme 4.20) can be ascribed to the increased concentration of the reactants in the micellar pseudophase where they are also more ordered. [Pg.176]

Quinone-mono-ketals 46 and 47 are also low reactive dienophiles and are sensitive to Lewis-acid catalysts. The use of high pressure overcomes this limitation [17]. As shown in Equation 5.7, cycloadditions with a variety of substituted 1,3-butadienes 48 occur regioselectively and c This approach provides access to a variety of annulated benzenes and naphthalenes after aromatization of adducts 49. [Pg.212]

Enantiomers (M)- and (P)-helicenebisquinones [32] 93 have been synthesized by high pressure Diels-Alder reaction of homochiral (+)-(2-p-tolylsulfo-nyl)-l,4-benzoquinone (94) in excess with dienes 95 and 96 prepared from the common precursor 97 (Scheme 5.9). The approach is based on the tandem [4 + 2] cycloaddition/pyrolitic sulfoxide elimination as a general one-pot strategy to enantiomerically enriched polycyclic dihydroquinones. Whereas the formation of (M)-helicene is explained by the endo approach of the arylethene toward the less encumbered face of the quinone, the formation of its enantiomeric (P)-form can be the result of an unfavourable interaction between the OMe group of approaching arylethene and the sulfinyl oxygen of 94. [Pg.219]

Azulene quinones [49b] are compounds related to the family of tropones and are considered to possess great biological and physiological potential. Several polycyclic compounds have been prepared by high pressure (3kbar, PhCl, 130°C, 15h) Diels-Alder reaction of 3-bromo-l,5-azulene quinone (137) and 3-bromo-l,7-azulene quinone (138) with several dienophiles. The cycloadditions were regioselective and afforded cycloadducts in reasonable to good yields (Scheme 5.20). [Pg.229]

Photochemical 2 + 2 cycloadditions can also take place intramolecularly if a molecule has two double bonds that are properly oriented. " The cyclization of the quinone dimer shown above is one example. Other examples are... [Pg.1082]

The symmetrical bis(ylidyl)phosphenium chlorides 103, obtained from the reaction of trimethylsilyl ylides 102 with PCI3 are the first phosphenium salts which do not need counterions of low basicity such as AICI4 to be isolated (Scheme 30) [119]. The explanation of their stability lies in the delocalisation of the phosphenium charge in the two phosphonium parts. The reactivity study of these species is reported and for example the phosphenium 103 (R=Ph) adds ortho quinones to the central phosphorus to give the corresponding dioxaphospholenium salts 104 via a [4-1-1] cycloaddition. [Pg.65]

Amouri and coworkers also demonstrated that the nucleophilic reactivity of the exocyclic carbon of Cp Ir(T 4-QM) complex 24 could be utilized to form carbon -carbon bonds with electron-poor alkenes and alkynes serving as electrophiles or cycloaddition partners (Scheme 3.17).29 For example, when complex 24 was treated with the electron-poor methyl propynoate, a new o-quinone methide complex 28 was formed. The authors suggest that the reaction could be initiated by nucleophilic attack of the terminal carbon of the exocyclic methylene group on the terminal carbon of the alkyne, generating a zwitterionic oxo-dienyl intermediate, followed by proton transfer... [Pg.78]

The coordinated quinone methide Jt-system of complex 24 can also undergo cycloaddition (Scheme 3.17). When 24 was reacted with /V-methylmaleimide, a [3+2] cycloaddition took place to give the tricyclic iridium complex 29. The closest example to this unprecedented reactivity pattern is a formal [3 + 2] cycloaddition of /)-quinone methides with alkenes catalyzed by Lewis acids, although in that reaction the QMs serve as electron-poor reagents. 36... [Pg.79]

Given their extraordinary reactivity, one might assume that o-QMs offer plentiful applications as electrophiles in synthetic chemistry. However, unlike their more stable /tora-quinone methide (p-QM) cousin, the potential of o-QMs remains largely untapped. The reason resides with the propensity of these species to participate in undesired addition of the closest available nucleophile, which can be solvent or the o-QM itself. Methods for o-QM generation have therefore required a combination of low concentrations and high temperatures to mitigate and reverse undesired pathways and enable the redistribution into thermodynamically preferred and desired products. Hence, the principal uses for o-QMs have been as electrophilic heterodienes either in intramolecular cycloaddition reactions with nucleophilic alkenes under thermodynamic control or in intermolecular reactions under thermodynamic control where a large excess of a reactive nucleophile thwarts unwanted side reactions by its sheer vast presence. [Pg.90]

Wang, J. Pettus, L. H. Pettus, T. R. R. Cycloadditions of o-quinone dimethides with p-quinol derivatives regiocontrolled formation of anthracyclic ring systems. Tetrahedron Lett. 2004, 45, 1793-1796. [Pg.116]


See other pages where Quinones cycloadditions is mentioned: [Pg.238]    [Pg.222]    [Pg.234]    [Pg.242]    [Pg.352]    [Pg.56]    [Pg.109]    [Pg.155]    [Pg.211]    [Pg.1081]    [Pg.3]    [Pg.7]    [Pg.12]    [Pg.29]    [Pg.83]    [Pg.111]    [Pg.116]   
See also in sourсe #XX -- [ Pg.840 , Pg.861 ]




SEARCH



1,4-Quinone cycloadditions, alkene

Cycloaddition of o-quinone methides

Cycloaddition of o-quinones

Cycloaddition reaction of quinone monoketals

Quinone methides cycloaddition

Quinone methides cycloadditions

Quinone monoketals 5+2] cycloadditions

Quinones cycloaddition to allenes

Quinones intramolecular cycloaddition

Quinones via metal-catalyzed cycloaddition

Quinones, cycloaddition

© 2024 chempedia.info