Cycloadditions three-component

Scheme 14 Coupling-cycloaddition three-component synthesis of isoxazoles 23...

Yamamoto and coworkers developed cycloadditions between activated olefins and vinylaziridines 253 with the aid of a palladium(O) catalyst (Scheme 2.63) [94], based on their three-component aminoallylation reaction. The corresponding 4-vi-nylpyrrolidines 255 were obtained as mixtures of diastereomers (ds trans= 55 45 to 23 77). 

Other interesting three-component cycloadditions are the following Sulfur dioxide and diazo compounds lead to episulfones (equation 75)436—in a special case to 4,5-dihydrothiepine S,S-dioxides437 sulfur dioxide, ketene, and arylimine lead to thiazole derivatives438 (equation 76) sulfur dioxide, quinone, and alkenes lead to benzoxathiane derivatives439 (equation 77). 

Iwasawa et al. also developed a new reaction involving a three-component coupling process which affords five-membered heterocycles. This [2s+2sh-1c] cycloaddition reaction supposes the consecutive addition of an alkynyllithium derivative to a Fischer carbene complex followed by the addition of a third component which can be an aldehyde, an imine, an isocyanate, or C02 [119] (Scheme 74). 

A microwave-assisted three-component reaction has been used to prepare a series of 1,4-disubstituted-1,2,3-triazoles with complete control of regiose-lectivity by click chemistry , a fast and efficient approach to novel functionalized compounds using near perfect reactions [76]. In this user-friendly procedure for the copper(l) catalyzed 1,3-dipolar cycloaddition of azides and alkynes, irradiation of an alkyl halide, sodium azide, an alkyne and the Cu(l) catalyst, produced by the comproportionation of Cu(0) and Cu(ll), at 125 °C for 10-15 min, or at 75 °C for certain substrates, generated the organic azide in situ and gave the 1,4-disubstituted regioisomer 43 in 81-93% yield, with no contamination by the 1,5-regioisomer (Scheme 18). 

The use of microwave-assisted multicomponent cycloaddition reactions allows unique heterocyclic scaffolds to be assembled rapidly from readily accessible starting materials. The three-component reaction of M-alkyl-l,4-DHP... 

So far, only those domino Knoevenagel/hetero-Diels-Alder reactions have been discussed where the cycloaddition takes place at an intramolecular mode however, the reaction can also be performed as a three-component transformation by applying an intermolecular Diels-Alder reaction. In this process again as the first step a Knoevenagel reaction of an aldehyde or a ketone with a 1,3-dicarbonyl compound occurs. However, the second step is now an intermolecular hetero-Diels-Alder reaction of the formed 1 -oxa-1,3 -butadiene with a dienophile in the reaction mixture. The scope of this type of reaction, and especially the possibility of obtaining highly diversified molecules, is even higher than in the case of the two-component transformation. The stereoselectivity of the cycloaddition step is found to be less pronounced, however. 

In a recent publication, Perumal and coworkers [441] described the condensation of an aldehyde 2-863 with an aniline 2-864 to give an imine which is trapped by a dienophile. However, when using this approach an intermolecular cycloaddition takes place as the reaction is performed as a three-component process using enol ethers or cyclopentadiene as dienophiles (Scheme 2.192). When using enol ether 2-... 

In 1987, Vaultier and coworkers [27] developed a combination of a [4+2] cycloaddition of a bora-1,3-diene to provide an allylborane, which then reacts with an aldehyde to give a highly functionalized alcohol. The Lallemand group, as well as Hall and colleagues, has recently used this procedure. In an approach for the synthesis of the antifeedant natural product clerodin (4-83), Lallemand and coworkers performed a three-component domino reaction of 4-80, 4-81 and methyl acrylate to give 4-82 (Scheme 4.18) [28]. 

Another combination of hetero-Diels-Alder reactions and a [3+2] cycloaddition of a nitroalkene was described by Avalos and coworkers [46]. Using the chiral substrate 4-134 derived from a sugar, the domino process can be performed as a three-component transformation using an electron-rich dienophile and an electron-poor... 

Rather complex structures are obtained by a novel chromium(O)-mediated three-component domino [6jt+2jt] cycloaddition described by Rigby and coworkers [315]. Irradiation of a mixture of the chromium complex 6/4-134 and the tethered diyne 6/4-135 with a Pyrex filter at 0 °C gave the polycyclic compounds 6/4-136 in medium to good yield (Scheme 6/4.34). 

Almost accidentally, Bienayme and Bouzid discovered that heterocyclic amidines 9-76 as 2-amino-pyridines and 2-amino-pyrimidines can participate in an acid-catalyzed three-component reachon with aldehydes and isocyanides, providing 3-amino-imidazo[l,2-a]pyridines as well as the corresponding pyrimidines and related compounds 9-78 (Scheme 9.15) [55]. In this reachon, electron-rich or -poor (hetero)aromatic and even sterically hindered aliphatic aldehydes can be used with good results. A reasonable rahonale for the formation of 9-78 involves a non-con-certed [4+1] cycloaddition between the isocyanide and the intermediate iminium ion 9-77, followed by a [1,3] hydride shift. 

A spiro[pyrrolidine-2,3 -oxindole] library <1998TL2235> has been synthesized via a three-component 1,3-dipolar cycloaddition in the solution phase. Isatins 432 were treated with L-proline or L-thiaproline and chalcone 433 in a MeOH-H20, CH3CN-H20, or dioxane-H20 solution. Spiropyrrolidines 49 (Scheme 96) were obtained as the sole products in good yield and high purity (Table 15). 

The three-component reaction between isatin 432a, a-aminoacids 433 (proline and thioproline) and dipolarophiles in methanol/water medium was carried out by heating at 90 °C to afford the pyrrolidine-2-spiro-3 -(2-oxindoles) 51. The first step of the reaction is the formation of oxazlidinones 448. Loss of carbon dioxide from oxazolidinone proceeds via a stereospecific 1,3-cycloreversion to produce the formation of oxazolidinones almost exclusively with /razw-stereoselectivity. This /f-azomethine ylide undergo 1,3-dipolar cycloaddition with dipolarophiles to yield the pyrrohdinc-2-r/ V -3-(2-oxindolcs) 51. (Scheme 101) <2004EJ0413>. 

Recognizing that intermediates in the [5 + 2]-reaction of VCPs and 7r-systems could be trapped with other components, Wender and co-workers reported a three-component [5 + 2 + l]-cycloaddition involving VCPs, alkynes, and CO that provide efficient access to densely functionalized bicyclo[3.3.0]octenones via a cyclooctadienone intermediate (Scheme 55).129 This reaction converts three commercially available materials to bicyclic products and creates two stereocenters and four C-C bonds. 

An interesting pericyclic-anionic-pericyclic domino reaction showing a high stereoselectivity is the cycloaddition-aldol-retro-ene process depicted in scheme 20.1581 The procedure presumably starts with a [4+2]-cycloaddition of diene 98 and S02 in presence of a Lewis acid. After opening of the formed adduct reaction with (Z)-silyl vinyl ether 99 leads to a mixture of alk-2-enesulfinic acids 101. It follows a retro-ene reaction which affords a 7 3 mixture of the products 102 and 103. The reaction described by Vogel et al is a nice example for the efficient generation of polypropionate chains with the stereoselective formation of three stereogenic centers and one (0-double bond in a three-component domino reaction in its strict definition. 

A 1,3-dipolar cycloaddition of the nonstabilized azomethine ylide 6 is the key step in a three-component reaction. The azomethine ylides were generated from (2-azaallyl)stannanes or (2-azaallyl)silanes 5 through an intramolecular iV-alkylation/demetallation cascade. The ylides underwent cycloaddition reactions with dipolarophiles yielding indolizidine derivatives 7-9 <2004JOC1919> (Scheme 1). 

In 2008, Gong and coworkers introduced a new chiral bisphosphoric acid 19 (Fig. 4) that consists of two BINOL phosphates linked by an oxygen atom for a three-component 1,3-dipolar cycloaddition (Scheme 42) [66]. Aldehydes 40 reacted with a-amino esters 105 and maleates 106 in the presence of Brpnsted acid 19 (10 mol%) to afford pyrrolidines 107 as endo-diastereomers in high yields (67-97%) and enantioselectivities (76-99% ee). This protocol tolerated aromatic, a,P-unsaturated, and aliphatic aldehydes. Aminomalonates as well as phenylglycine esters could be employed as dipolarophiles. 

In this chapter we provide an overview of studies originating from the above work and directed at the design and development of three new metal-catalyzed cycloaddition reactions, namely the [5+2] cycloaddition of vinylcyclopropanes (VCPs) and rc-systems, the [6+2] cycloaddition of vinylcyclobutanones and re-systems, and the three-component, [5+2+1] cycloaddition of VCPs, rc-systems, and CO. These new reactions provide fundamentally new approaches to a range of problems in seven- and eight-membered ring synthesis. 

VCPs and 27r-components and the subsequent development of the first [5-i-2-i-l] three-component cycloaddition approach to eight-membered ring synthesis. 

In the course of our studies on the [6+2] cycloaddition, the formation of products arising from a [6+2-1] path was observed (Scheme 13.20). Conceptually, 249 produces the [6+2] cycloadduct 251, but under certain conditions 49, the [6+2-1] product, is observed, presumably arising through the conversion of 250 to 48. Reflection on this observation suggests that one might start with VCP 41 and an alkyne and trap 48 with CO in the microscopic reverse of the 250-to-48 path to produce 251 by an overall three-component [5+2+1] cycloaddition. This idea worked. 

The first MCR involving the explicit use of a-acidic isonitriles was reported in 1998 by Sisko [131]. The reaction involves the cycloaddition of aTosMIC derivative (8) to an (in situ-generated) imine (10) followed by the elimination of p-toluenesulfinic acid (TsH) as described in 1977 by van Leusen for preformed imines (Fig. 5, scaffold P) [119]. Although several potential pitfalls for the conversion of the traditional van Leusen [3 + 2] cycloaddition to the so-called van Leusen three-component reaction (vL-3CR) of imidazoles were expected by the author, simply stirring the aldehyde and amine for 20 min followed by addition of the TosMIC derivative and base resulted in the isolation of the corresponding imidazole (9) in high yield [131]. 

An interesting entry to functionalized dihydropyrans has been intensively studied by Tietze in the 1990s using a three-component domino-Knoevenagel Hetero-Diels-Alder sequence. The overall transformation involves the transient formation of an activated heterodienophile by condensation of simple aldehydes with 1,3-dicarbonyls such as barbituric acids [127], Meldrum s acid [128], or activated carbonyls. In situ cycloaddition with electron-rich alkenes furnished the expected functionalized dihydropyrans. Two recent examples concern the reactivity of 1,4-benzoquinones and pyrazolones as 1,3-dicarbonyl equivalents under microwave irradiation. In the first case, a new three-component catalyst-free efficient one-pot transformation was proposed for the synthesis of pyrano-1,4-benzoquinone scaffolds [129]. In this synthetic method, 2,5-dihydroxy-3-undecyl-1,4-benzoquinone, paraformaldehyde, and alkenes were suspended in ethanol and placed under microwave irradiations to lead regioselectively the corresponding pyrano-l,4-benzoquinone derivatives (Scheme 38). The total regioselectivity was... 

Intermolecular Allylboration. A tandem aza[4+2] cycloaddition/allyl-boration three-component reaction has been designed based on the prece-dented carbocyclic [4- -2] cycloaddition/allylboration and a snbsequent one-pot variant. Thns, the thermal reaction between hydrazonobutadienes 138, A-substitnted maleimides, and aldehydes provides polysnbstituted a-hydroxy-alkylpiperidines 141 via the cyclic allylboronate intermediate 139 and the proposed chairlike transition stmctnre 140 (Eq. 103). Monoactivated dienophiles like acrylates fail to react with heterodienes 138 bnt the scope of aldehydes is very broad both ahphatic and aromatic aldehydes are snitable, inclnding electron-rich ones. An inverse electron-demand variant to access the corresponding dihy-dropyran derivatives via the intermediacy of enantiomerically enriched pyranyl allylic boronate 76 has been snbsequently developed (see Eq. 64). ° ... 

The Lewis acid-catalyzed three-component reaction of dihydropyridines, aldehydes, and />-substituted anilines efficiently yields highly substituted tetrahydroquinolines in a stereoselective manner, through a mechanism believed to be imine formation followed by formal [4-1-2] cycloaddition (Scheme 41). The 1,4-dihydropyridine starting materials were also prepared in situ by the nucleophilic addition of cyanide to pyridinium salts, creating in effect a one-pot four-component reaction <20030L717>. 

An interesting one-pot, five-component domino process using an intermolecular Diels-Alder reaction of furans with AT-phenylmaleimide as its final step has been used to construct the central core of indolo[2,3- ]carbazoles (Equation 86) <2002AGE4291>. Thus, aminooxazoles produced from an Ugi three-component reaction undergo acylation/intramolecular Diels-Alder/retro-Diels-Alder cycloreversion with pentafluorophenyl arylprop-2-ynoates to give furan derivatives. Subsequent Diels-Alder cycloaddition at elevated temperatures with A -phenylmaleimide produces carbazoles in good yields (Table 5). 

The carbonyl ylide generated from metal carbene can also add to C=0 or C=N bonds. The [2 + 3]-cycloaddition of carbonyl ylide with G=0 bond has been used by Hodgson and co-workers in their study toward the synthesis of zaragozic acid as shown in Scheme n 27a,27d Recently, a three-component reaction approach to syn-a-hydroxy-f3-amino ester based on the trapping of the carbonyl ylide by imine has been reported.The reaction of carbonyl ylide with aldehyde or ketone generally gives l,3-dioxolanes. Hu and co-workers have reported a remarkable chemoselective Rh2(OAc)4-catalyzed reaction of phenyl diazoacetate with a mixture of electron-rich and electron-deficient aryl aldehydes. The Rh(ii) carbene intermediate reacts selectively with electron-rich aldehyde 95 to give a carbonyl ylide, which was chemospecifically trapped by the electron-deficient aldehyde 96 to afford 1,3-dioxolane in a one-pot reaction (Equation (12)). 

---