Quality control field fortified sample

A set of quality control parameters includes field blank, field fortified blank, md field fortified sample. 

Untreated (control) soil is collected to determine the presence of substances that may interfere with the measurement of target analytes. Control soil is also necessary for analytical recovery determinations made using laboratory-fortified samples. Thus, basic field study design divides the test area into one or more treated plots and an untreated control plot. Unlike the treated plots, the untreated control is typically not replicated but must be sufficiently large to provide soil for characterization, analytical method validation, and quality control. To prevent spray drift on to the control area and other potential forms of contamination, the control area is positioned > 15 m away and upwind of the treated plot, relative to prevailing wind patterns. 

Fresh oxamyl standards were prepared for each fortification event. Concentrations of 50 and 400 qg mL analytical-grade oxamyl were prepared in a 20% acetonitrile-80% FIPLC-grade water solution. The solutions were tranferred in 1-mL aliquots into uniquely identified vials so that each vial contained the correct volume of oxamyl standard to fortify one quality control sample. The vials were shipped as needed during the course of the study to each field site. 

To fortify a sample, the label from a fortification sampling vial was removed and secured to the pre-labeled sample jar. Spike vials were individually shaken before use. The cap was discarded, the contents of the vial were poured into the sample jar and then the vial was dropped into the sample. The sample jar was capped with a Tefion-lined lid, hand shaken to mix, placed in a Kapak bag and sealed. Jars were placed immediately in storage freezers. In all cases, quality control samples were transported and stored with their corresponding field plot samples throughout sample handling and shipment to the analytical facility. 

---