Proving grounds

Printing Office, vol. 2, November 1990, Figs. 2-7 and 2-15, or Kingery and PanniU, Memorandum Report No. 1518, Ballistic Research Laboratories, Aberdeen Proving Ground, U.S., April 1964) can then be used to determine the blast parameters of interest (Fig. 26-9). This method has hmitations in the far field where the peak incident overpressure is less than 4 kN/m" (0.5 psi). In this region, local terrain and weather effects become significant. 

Jonas, G.H. and Zukas, J.A., Mechanics of Penetration Analysis and Experiment, US Army Ballistic Research Laboratory Technical Report ARBL-TR-02137, Aberdeen Proving Ground, MD, 64 pp., February 1979. 

Walters, W.P., Influence of Material Viscosity on the Theory of Shaped-Charge Jet Formation, US Army Ballistic Research Laboratory Memorandum Report No. ARBRL-MR-02941, Aberdeen Proving Ground, MD, 43 pp., August 1979. 

Walters, W.P., Chou, P.C., and Flis, W.J., US Army Ballistic Research Laboratory Technical Report No. BRL-TR-2826, Aberdeen Proving Ground MD, 41 pp., July 1987. 

Sponsor/Developing Organization-. U.S. Army Chemical Research and Development Engineering Center, Aberdeen, MD Custodian Commander, U.S. Army CRDEC, Aberdeen Proving Ground, MD 21010-5423. 

Whitacre, C. G. et al., 1987, Personal Computer Program for Chemical Hazard Prediction (D2P< U.S. Army Munitions Command, Aberdeen Proving Ground, CRDEC-TR-87021. 

Address Edgewood Chemical Biological Center (ECBC), 5183 Blackhawk Road Bldg E-5101 Aberdeen Proving Ground, MD 21010-5424 USA Phone +1 410 436 4345 (DSN 584 4345)... 

Sachs, R. G. 1944. The dependence of blast on ambient pressure and temperature. BRL Report no. 466, Aberdeen Proving Ground. Maryland. 

Development of Accelerated Performance Tests for Paint-Phosphate-Metal Systems. Surface Preparation of Metals , Aberdeen Proving Ground, USA (1955)... 

Test and Evaluation Command responsible for environmental test centers, proving grounds, and the former Continental Army Command service test centers... 

Proving Ground (PG). An area or location where equipment, ammo, or weapons are tested or proved... 

Anon, Allied and Enemy Explosives , Aberdeen Proving Ground (1946), 131—32... 

Laboratory measurements are primarily concerned with tread compound traction properties. Tread pattern and other tire parameters like cornering and longitudinal slip stiffness require still tests with tires on either large indoor machines or direct proving ground measurements. 

Experiments in directed breeding have been carried out in bacteria and are proving grounds for metabolic engineering of pigment accumulations in plants. Experi-... 

RICHARD McGEE, Army Research Laboratory, Aberdeen Proving Ground, Maryland... 

Army. 1978. Toxicity study in rats dosed with diisopropyl methylphosphonate (DIMP) in their drinking water. Aberdeen Proving Ground, MD Army Armament Research and Development Command. NTIS No. AD-A054-733. 

Manning, J., Boopathy, R., and Kulpa, C.F., A Laboratory Study in Support of the Pilot Demonstration of a Biological Soil Slurry Reactor, Report no. SFIM-AEC-TS-CR-94038, U.S. Army Environmental Center, Aberdeen Proving Ground, MD, 1995. 

Andersen ME, Krishnan K. 1994. Relating in vitro to in vivo exposures with physiologically-based tissue dosimetry and tissue response models. In Salem H, ed. Animal test alternatives. Aberdeen Proving Ground, MD U.S. Army Chemical Research Development and Engineering Center. 

Balasco AA, Santhanam CJ, Stevens JI, et al. 1986. Soluble sulfide precipitation study. Report to the U S. Army Toxic and Hazardous Materials Agency, Aberdeen Proving Ground, MD, by Arthur D. Little, Inc., Cambridge, MA. Report no. ADL-54144. 

This performance was demonstrated in a proof-of-principle BWA contractor performance test conducted at ORNL early in 2002, and witnessed and reported31 by staff from the Dugway Proving Ground. This test was conducted... 

---