Properties and Behavior of Fluids

Transportation and the storage of fluids (gases and hquids) involves the understanding of the properties and behavior of fluids. The study of fluid dynamics is the study of fluids and their motion in a force field. 

Fluid statics is concerned with the static properties and behavior of fluids... 

SCFs may be used in the same way as other ordinary solvents taking into account their different properties and behaviors. Supercritical fluids can replace liquids solvents in many processes, such as extractions from solids (leaching), countercurrent multistage separations, chromatographic separations, and others, provided the solvent properties of the SCFs are adequate. 

A wide variety of nonnewtonian fluids are encountered industrially. They may exhibit Bingham-plastic, pseudoplastic, or dilatant behavior and may or may not be thixotropic. For design of equipment to handle or process nonnewtonian fluids, the properties must usually be measured experimentally, since no generahzed relationships exist to pi e-dicl the properties or behavior of the fluids. Details of handling nonnewtonian fluids are described completely by Skelland (Non-Newtonian Flow and Heat Transfer, Wiley, New York, 1967). The generalized shear-stress rate-of-strain relationship for nonnewtonian fluids is given as... 

An understanding of the behavior of fluids in motion, or solids for that matter, requires an understanding of the term inertia. Inertia is the term used by scientists to describe the property possessed by all forms of matter that make it resist being moved when it is at rest and to resist any change in its rate or motion when it is moving. 

Fabrication processing of these materials is highly complex, particularly for materials created to have interfaces in morphology or a microstructure [4—5], for example in co-fired multi-layer ceramics. In addition, there is both a scientific and a practical interest in studying the influence of a particular pore microstructure on the motional behavior of fluids imbibed into these materials [6-9]. This is due to the fact that the actual use of functionalized ceramics in industrial and biomedical applications often involves the movement of one or more fluids through the material. Research in this area is therefore bi-directional one must characterize both how the spatial microstructure (e.g., pore size, surface chemistry, surface area, connectivity) of the material evolves during processing, and how this microstructure affects the motional properties (e.g., molecular diffusion, adsorption coefficients, thermodynamic constants) of fluids contained within it. 

Finally, a relatively new area in the computer simulation of confined polymers is the simulation of nonequilibrium phenomena [72,79-87]. An example is the behavior of fluids undergoing shear flow, which is studied by moving the confining surfaces parallel to each other. There have been some controversies regarding the use of thermostats and other technical issues in the simulations. If only the walls are maintained at a constant temperature and the fluid is allowed to heat up under shear [79-82], the results from these simulations can be analyzed using continuum mechanics, and excellent results can be obtained for the transport properties from molecular simulations of confined liquids. This avenue of research is interesting and could prove to be important in the future. 

The dynamic behavior of fluid interfaces is usually described in terms of surface rheology. Monolayer-covered interfaces may display dramatically different rheological behavior from that of the clean liquid interface. These time-dependent properties vary with the extent of intermolecular association within the monolayer at a given thermodynamic state, which in turn may be related directly to molecular size, shape, and charge (Manheimer and Schechter, 1970). Two of these time-dependent rheological properties are discussed here surface shear viscosity and dynamic surface tension. 

Deissler (D3) recently extended the analysis of thermal and material transfer associated with turbulent flow in tubes to include the behavior of fluids with high molecular Prandtl and Schmidt numbers. If the variation in molecular properties of the fluid with position are neglected, the following expression for the temperature distribution was suggested (D3) ... 

Gas flow processes through microporous materials are important to many industrial applications involving membrane gas separations. Permeability measurements through mesoporous media have been published exhibiting a maximum at some relative pressure, a fact that has been attributed to the occurrence of capillary condensation and the menisci formed at the gas-liquid interface [1,2]. Although, similar results, implying a transition in the adsorbed phase, have been reported for microporous media [3] and several theoretical studies [4-6] have been carried out, a comprehensive explanation of the static and dynamic behavior of fluids in micropores is yet to be given, especially when supercritical conditions are considered. Supercritical fluids attract, nowadays, both industrial and scientific interest, due to their unique thermodynamic properties at the vicinity of the critical point. For example supercritical CO2 is widely used in industry as an extraction solvent as well as for chemical... 

---