Process selection management systems

It is incumbent upon the toller to develop and follow internal management systems as appropriate to support business needs, production needs, process safety, environmental responsibility, and worker health. The selection process should have considered whether or not satisfactory systems are in place. Nevertheless, the contract or auxiliary documents may be the vehicle used to help ensure that the system reviewed is the system actually used for completing the toll in question. Within the process safety management system, the management of change and training elements are essential subsystems. 

Compliance Audits. Employers need to select a trained individual or assemble a trained team of people to audit the process safety management system and program. A small process or plant may need only one knowledgeable person to conduct an audit. The audit is to include an evaluation of the design and effectiveness of the process safety management system and a field... 

In this book we have selected ISO 9001 as the model system and used ISO 9004 to identify the management process and quality system elements. These two standards are typically those used in the process industries. Although these guidelines are focusing on ISO 9001 and ISO 9004, your... 

The protocol developed in Chapter 5, which was applied on accidents as shown in Chapter 6, is applied on three cases in the Dutch chemical process industry. First, the cases are selected according the criteria stated in Chapter 5. Secondly, the developed protocol of analysis is applied on these selected cases, to identify why and how it is still possible that accidents may occur despite precursors and several existing safety barriers. Thirdly, the results from the analysis are further elaborated on, indicating the problems in current safety management systems, allowing accidents to occur. 

Process analytics systems eonsist of the following components the sampling systems, the analyzer(s), automation as well as a data management system. These components must be carefully selected and tested during the design phase because each part profoundly affects all others. When designing an analyzer system, the following considerations should be addressed ... 

---