Printed circuits, description

Note The meaning of ESD and of pc board are not given in the abstract. They are ESD= Electronic Storage Device and pc= printed circuit board More detailed description is given in Bulletin 71922 or Report 71-E- 57 entitled ESD Applications to Storable Weapon Systems , published by Gould Ionicsjlnc, P.O. Box 1377, Canoga Park, Calif, 91304... 

Microelectronic devices are found in appliances of almost every description, and projections unsurprisingly show an industry that is likely to continue to grow in the future [3]. For the purposes of this chapter, the electronics industry will be taken to encompass (1) the manufacture of computer chips and other electronic components, (2) the manufacture of printed circuit boards and (3) the assembly and packaging processes that bring the two together. Clearly, therefore, this arbitrary definition embraces the manufac-... 

IPC-2614, Sectional Requirements for Board Fabrication Documentation (Printed Circuit Board Description Including Embedded Passives) ... 

There are two basic steps in the assembly of a printed circuit board (a) placement of the components (resistors, capacitors, etc.) on the substrate and (b) soldering those components into place. Although this is a fairly accurate description of a through-hole, hand-soldering operation,... 

Some common techniques available for pollution prevention in a printed circuit board fabrication facility are listed as follows. While this list is not all-inclusive, it provides an overview of the types of things that are important to consider. A brief description of each option is presented in the next section. 

Basically, the electronics is developed much in the same way as mechanics, based on design documents and also produced within different sample iterations, which makes the description of the sample phases comparable. As already described for mechanics, a lot of design parameters for electronics depend on mechanical parts such as the printed circuit board, plugs or housing. This means that theses tolerances or tolerable discrepancies are the basis for the design of the electronics. Especially for geometric characteristics there are a lot of characteristics to be considered. 

A Hst of the components required for the construction of electrochemical analyzer, a brief description of them, and their functionality appears in Table 5.2. The total cost of this potentiostat is less than 50, making it cost effective for individual or small group experiments and special projects. The dimensions of the whole device are 10 x 13 cm on printed circuit boards (Figure 5.47). The simple circuit presented here is solid state, amenable to battery-powered operation, and if interficed to an appropriate electrochemical cell, can be used as a rugged, field-portable sensor system for monitoring... 

IPC-2581, Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology IPC-258x and sectional requirements thereof, Institute for Interconnecting and Packaging Electronic Circuits, 3000 Lakeside Drive, Bannockburn, IL, USA. 

Standards, basic fluid power law and terminology ANSI/ISO Circuit symbols, print interpretation Circuit elements and their functions Mechanical descriptions Control concepts... 

---