Primary catalytic treatment

Aniline 77 was converted into its diazonium salt with nitrous acid and this was followed by reduction with stannous chloride to afford the corresponding arylhydrazine 78. Condensation of 78 with 3-cyanopropanal dimethylacetal 79 gave the arylhydrazone 80. Treatment of 80 with PPE resulted in cyclization to indole 81. The nitrile group was then reduced to the primary amine by catalytic hydrogenation. Reaction of the amine with excess formalin and sodium borohydride resulted in Imitrex (82). 

The synthesis of key intermediate 12, in optically active form, commences with the resolution of racemic trans-2,3-epoxybutyric acid (27), a substance readily obtained by epoxidation of crotonic acid (26) (see Scheme 5). Treatment of racemic 27 with enantio-merically pure (S)-(-)-1 -a-napthylethylamine affords a 1 1 mixture of diastereomeric ammonium salts which can be resolved by recrystallization from absolute ethanol. Acidification of the resolved diastereomeric ammonium salts with methanesulfonic acid and extraction furnishes both epoxy acid enantiomers in eantiomerically pure form. Because the optical rotation and absolute configuration of one of the antipodes was known, the identity of enantiomerically pure epoxy acid, (+)-27, with the absolute configuration required for a synthesis of erythronolide B, could be confirmed. Sequential treatment of (+)-27 with ethyl chloroformate, excess sodium boro-hydride, and 2-methoxypropene with a trace of phosphorous oxychloride affords protected intermediate 28 in an overall yield of 76%. The action of ethyl chloroformate on carboxylic acid (+)-27 affords a mixed carbonic anhydride which is subsequently reduced by sodium borohydride to a primary alcohol. Protection of the primary hydroxyl group in the form of a mixed ketal is achieved easily with 2-methoxypropene and a catalytic amount of phosphorous oxychloride. 

With ring G in place, the construction of key intermediate 105 requires only a few functional group manipulations. To this end, benzylation of the free secondary hydroxyl group in 136, followed sequentially by hydroboration/oxidation and benzylation reactions, affords compound 137 in 75% overall yield. Acid-induced solvolysis of the benzylidene acetal in 137 in methanol furnishes a diol (138) the hydroxy groups of which can be easily differentiated. Although the action of 2.5 equivalents of tert-butyldimethylsilyl chloride on compound 138 produces a bis(silyl ether), it was found that the primary TBS ether can be cleaved selectively on treatment with a catalytic amount of CSA in MeOH at 0 °C. Finally, oxidation of the resulting primary alcohol using the Swem procedure furnishes key intermediate 105 (81 % yield from 138). 

Allylic alcohols can be converted to epoxy-alcohols with tert-butylhydroperoxide on molecular sieves, or with peroxy acids. Epoxidation of allylic alcohols can also be done with high enantioselectivity. In the Sharpless asymmetric epoxidation,allylic alcohols are converted to optically active epoxides in better than 90% ee, by treatment with r-BuOOH, titanium tetraisopropoxide and optically active diethyl tartrate. The Ti(OCHMe2)4 and diethyl tartrate can be present in catalytic amounts (15-lOmol %) if molecular sieves are present. Polymer-supported catalysts have also been reported. Since both (-t-) and ( —) diethyl tartrate are readily available, and the reaction is stereospecific, either enantiomer of the product can be prepared. The method has been successful for a wide range of primary allylic alcohols, where the double bond is mono-, di-, tri-, and tetrasubstituted. This procedure, in which an optically active catalyst is used to induce asymmetry, has proved to be one of the most important methods of asymmetric synthesis, and has been used to prepare a large number of optically active natural products and other compounds. The mechanism of the Sharpless epoxidation is believed to involve attack on the substrate by a compound formed from the titanium alkoxide and the diethyl tartrate to produce a complex that also contains the substrate and the r-BuOOH. ... 

Another catalytic application emanating from the Hieber base reaction was developed by Reppe and Vetter [108]. They showed that 1-propanol 126 could be generated by treatment of ethylene 125 with catalytic amounts of Fe(CO)5 78 under CO-pressure and basic reaction conditions (Scheme 33). Thereby, trimethylamine and V-alkylated amino acid derivatives mrned out to be optimal bases for this reaction. Like ethylene 125, propylene could be transferred mainly to 1-butanol diolefins like butadiene only reacted to monoalcohols. By employing these reaction conditions to olefins in the presence of ammonia, primary or secondary amines, mono-, di-, and trialkylamines were obtained whose alkyl chains were elongated with one carbon atom, compared to the olefins. 

The detection and quantification of one or more of the above lipid peroxidation produas (primary and/or secondary) in appropriate biofluids and tissue samples serves to provide indices of lipid peroxidation both in ntro and in vivo. However, it must be stressed that it is absolutely essential to ensure that the products monitored do not arise artifactually, a very difiScult task since parameters such as the availability of catalytic trace metal ions and O2, temperature and exposure to light are all capable of promoting the oxidative deterioration of PUFAs. Indeed, one sensible precaution involves the treatment of samples for analysis with sufficient levels of a chainbreaking antioxidant [for example, butylated hydroxy-toluene (BHT)] immediately after collection to retard or prevent peroxidation occurring during periods of storage or preparation. 

Thermal treatment—Processes in which vapor-phase contaminants are destroyed via high-temperature oxidation the primary categories of thermal treatment used to treat MTBE and other oxygenates include thermal oxidation, which employs a flame to generate the high temperatures needed to oxidize contaminants, and catalytic oxidation, which employs lower temperatures in the presence of a catalyst (typically platinum, palladium, or other metal oxides) to destroy contaminants. 

Rearrangement of an intermediary S-ylide is the key step of a synthesis of 142 from the 6-phenylthiomethyl-2-pyrone 140 and ethyl diazoacetate in the presence of a catalytic amount of Cu(acac)2 158>. The primary rearrangement product 141 is smoothly isomerized to 142 by treatment with silica gel. 

Acyl hydrazides are useful precursors for the synthesis of 1,2,4-triazoles. Reaction of acyl hydrazides 149 with imidoylbenzotriazoles 148 in the presence of catalytic amounts of acetic acid under microwave irradiation afforded 3,4,5-trisubstituted triazoles 150 <06JOC9051>. Treatment of A-substituted acetamides with oxalyl chloride generated imidoyl chlorides, which reacted readily with aryl hydrazides to give 3-aryl-5-methyl-4-substituted[ 1,2,4]triazoles <06SC2217>. 5-Methyl triazoles could be further functionalized through a-lithiation and subsequent reaction with electrophiles. ( )-A -(Ethoxymethylene)hydrazinecarboxylic acid methyl ester 152 was applied to the one-pot synthesis of 4-substituted-2,4-dihydro-3//-1,2,4-triazolin-3-ones 153 from readily available primary alkyl and aryl amines 151 <06TL6743>. An efficient synthesis of substituted 1,2,4-triazoles involved condensation of benzoylhydrazides with thioamides under microwave irradiation <06JCR293>. 

A modified version of the Brown-Negishi reaction using B-alkylcatechol-boranes was reported (Scheme 32). This novel method is based on a simple one-pot procedure involving the hydroboration of various substituted alkenes with catecholborane, followed by treatment with catalytic amount of oxygen/DMPU/water and a radical trap. Efficient radical additions to a,ft-unsaturated ketones and aldehydes have been reported. Primary alkyl radicals are efficiently generated by this procedure and the reaction has been applied to a 300 mmol scale synthesis of the y-side chain of (-)-perturasinic... 

---