Prevention through design ANSI/ASSE

In the previously mentioned standard on prevention through design (ANSI/ASSE, 2011), these definitions of acceptable risk and ALARP... 

Expanding on Lowrance and Rowe, the following definition of risk relates more precisely to the work of the many safety professionals who have responsibilities for environmental matters in addition to occupational safety and health. It appears in the previously mention prevention through design (ANSI/ASSE, 2011) standard. 

ANSI and ASSE. 2011. Prevention Through Design Guidelines for Addressing Occupational Hazards and Risks in Design and Redesign Processes. ANSI/ASSE Z590.3-2011. Des Plaines, lU. 

In ANSI/ASSE Z590.3—2011, the Prevention through Design standard, Addendum G comments on only eight hazard analysis and risk assessment techniques, intentionally. They are Preliminary Hazard Analysis, What-If Analysis, Checklist Analysis, What-If Checklist Analysis, Hazard and Operability Analysis, Failure Mode and Effects Analysis, Fault Tree Analysis, and Management Oversight and Risk Tree (MORT). It was also said in Z590.3 that ... 

Section 7 in ANSI/ASSE Z590.3 is devoted to the hazard analysis and risk assessment process. It is the core of the Prevention through Design standard. The following process outline is a recent work, having been approved by the American National Standards Institute on September 1,2011. In the standard, the narrative for each subject is extensive and is recommended reading. 

---