Preparation aliphatic amines

The purpose of preparing aliphatic amine oxides is usually their thermal decomposition to cis alkenes and N,N-dialkylhydroxylamines (Cope rearrangement) [156, 161, 1187]. Thus A, A -dimethylcyclohexylmethylamine is oxidized with 30% hydrogen peroxide in methanol to its oxide, whose decomposition at 90-100 °C at 10 mm of Hg and at 160 °C for 2 h furnishes 79-88% of methylenecyclohexane and 78-90% of A, A -dimethylhydroxyl-amine [161], Another example is the preparation of cw-cyclooctene from dimethylcyclooctylamine (equation 502) [1187]. 

Colourless liquid with a characteristic ammo-niacal smell m.p. 9 C, b.p. 106°C. Miscible with water. It is present in pepper as the alkaloid piperine from which it can be obtained by healing with alkali. It can also be prepared by the reduction of pyridine, either electrolytically or by other means. Piperidine is a strong base, behaving like the aliphatic amines. 

The reaction is applicable to the preparation of amines from amides of aliphatic aromatic, aryl-aliphatic and heterocyclic acids. A further example is given in Section IV,170 in connexion with the preparation of anthranilic acid from phthal-imide. It may be mentioned that for aliphatic monoamides containing more than eight carbon atoms aqueous alkaline hypohalite gives poor yields of the amines. Good results are obtained by treatment of the amide (C > 8) in methanol with sodium methoxide and bromine, followed by hydrolysis of the resulting N-alkyl methyl carbamate ... 

The modified procedure involves refluxing the N-substituted phthaUmide in alcohol with an equivalent quantity of hydrazine hydrate, followed by removal of the alcohol and heating the residue with hydrochloric acid on a steam bath the phthalyl hydtazide produced is filtered off, leaving the amine hydrochloride in solution. The Gabriel synthesis has been employed in the preparation of a wide variety of amino compounds, including aliphatic amines and amino acids it provides an unequivocal synthesis of a pure primary amine. 

Sulfonamides (R2NSO2R ) are prepared from an amine and sulfonyl chloride in the presence of pyridine or aqueous base. The sulfonamide is one of the most stable nitrogen protective groups. Arylsulfonamides are stable to alkaline hydrolysis, and to catalytic reduction they are cleaved by Na/NH3, Na/butanol, sodium naphthalenide, or sodium anthracenide, and by refluxing in acid (48% HBr/cat. phenol). Sulfonamides of less basic amines such as pyrroles and indoles are much easier to cleave than are those of the more basic alkyl amines. In fact, sulfonamides of the less basic amines (pyrroles, indoles, and imidazoles) can be cleaved by basic hydrolysis, which is almost impossible for the alkyl amines. Because of the inherent differences between the aromatic — NH group and simple aliphatic amines, the protection of these compounds (pyrroles, indoles, and imidazoles) will be described in a separate section. One appealing proj>erty of sulfonamides is that the derivatives are more crystalline than amides or carbamates. 

Reaction of a-isocyano-a, / -unsaturated sulfones with primary aliphatic amines affords 1,5-disubstituted imidazoles 59 (equation 56)48. The reaction of aromatic amines such as aniline is too slow to be of practical use. Results of the preparation of 59 are listed in Table 5. 

This method gives better yields than other methods of preparation of 2-bromoallylamine, and it is the most convenient method for the preparation of large quantities of the compound. The procedure illustrates a reaction, the so-called Delepine reaction, that has been used for the preparation of many primary aliphatic amines.8-12 A number of primary aliphatic amines have been prepared by this method without isolation of the intermediate hexaminium salt.11 Several preparations of aliphatic aldehydes via the hexaminium salt have been described in earlier volumes of this series.13... 

The method can be used to prepare a number of a-aminonitriles from aliphatic or aromatic aldehydes and ketones and secondary aliphatic amines.4... 

With sUght modifications of these conditions it is possible to prepare mono N-substituted imidazoles (Scheme 5), the reaction working well with aliphatic amines but not with many aromatic amines. The imsymmetrical... 

A variety of cleavage conditions have been reported for the release of amines from a solid support. Triazene linker 52 prepared from Merrifield resin in three steps was used for the solid-phase synthesis of aliphatic amines (Scheme 22) [61]. The triazenes were stable to basic conditions and the amino products were released in high yields upon treatment with mild acids. Alternatively, base labile linker 53 synthesized from a-bromo-p-toluic acid in two steps was used to anchor amino functions (Scheme 23) [62]. Cleavage was accomplished by oxidation of the thioether to the sulfone with m-chloroperbenzoic acid followed by 13-elimination with a 10% solution of NH4OH in 2,2,2-trifluoroethanol. A linker based on l-(4,4 -dimethyl-2,6-dioxocyclohexylidene)ethyl (Dde) primary amine protecting group was developed for attaching amino functions (Scheme 24) [65]. Linker 54 was stable to both acidic and basic conditions and the final products were cleaved from the resin by treatment with hydrazine or transamination with ra-propylamine. 

Preparative hazard See Nitric acid Aliphatic amines... 

These authors also found that the addition of excess MgO during the in situ preparation of allyltantalum species improved reaction outcomes, even allowing for the first example of allylation of imines derived from aliphatic amines and aliphatic aldehydes (prepared in situ at room temperature in the presence of molecular sieves) (Equation (18)). The selective addition to imines permitted three-component reactions. 

Unsymmetrical secondary aliphatic amines have been prepared by reaction of alkyl halides with benzylidene amines and subsequent hydrolysis 814 by reaction of alkyl halides with alkyl amines 5 by reduction of amine-aldehyde adducts 8-8 and by dealkylation of tertiary amines with dibenzoyl peroxide. ... 

The procedure is a general one for the preparation of unsymmetrical aliphatic amines, for the submitters have used it to obtain good yields of N-methylpentylamine, N-methylhexylamine, N-methylheptylamine, N-ethylbutylamine, N-ethylpentylamine, and N-ethylheptylamine. 

In the case of quaternary derivatives made from the non-planar aliphatic amines 7.64, 7.65 and 7.66, steric strains further destabilise the C-N+ bond so that reaction with cellulose occurs under alkaline conditions at 30 °C, whereas temperatures of about 40-50 °C are required for the pyridinium derivatives 7.67. The quaternisation approach appeared to offer the opportunity to prepare dyes yielding reactivity levels intermediate between those of aminochloro- and dichlorotriazine dyes without loss of the desirable stability of the dye-fibre bond to acidic conditions that is characteristic of aminohalotriazine dyes. Unfortunately, this ideal was not attainable because of the objectionable odours of the tertiary amines liberated by the fixation reaction and the sensitivity of the reactivity behaviour of the quaternised derivatives to the nature of the chromogen attached to the triazine ring, making it difficult to select compatible combinations of dyes. 

In general the method is not as useful for the preparation of arylamines as for aliphatic amines. But the method becomes of preparative interest when the nuclear halogenated compound contains in addition some electron withdrawing substituents e.g., -N02, -CN etc. in ortho and para positions. Thus, 2, 4, 6 trinitroaniline (picramide) is readily prepared by the action of aqueous ammonia on... 

Preparation with aliphatic amines, on the other hand, may promote side reactions, converting portions of a pigment to compounds that are somewhat soluble in toluene. Toluene is the most important solvent for publication gravure printing inks. This preparative method reduces the viscosity of the printing ink. The pigment is thus partially converted to a soluble azomethine (Schiff s base), which is formed by reaction between the acetoacetic arylide and an aliphatic amine [5] ... 

Wolfbeis investigated the reactions of amines and orthoesters with different CH-acid molecules (81CB3471). When the reactions of aniline, ethyl orthoformate, and dialkyl malonates (2 mol) were carried out at 130-140°C for 4 hr, phenylaminomethylenemalonamates (245) were obtained (81CB3471). Similar reactions with aliphatic amines were unsuccessful. Phenylaminomethylenemalonic acid could not be prepared in the reactions of aniline, methyl orthoformate or orthoacetate, and malonic acid. When these reactions were carried out in 2-propanol, only amidines (246) were obtained. 

Aliphatic analogues of aniline and nitrobenzene were discovered somewhat later. Methy-lamine and ethylamine were first prepared by Wurtz in 184914, and thereafter many aliphatic amines were made and their properties studied13, particularly by Hofmann15. 

Fig. 9.8 presents another, more complex type of phosphate prodrugs, namely (phosphoryloxy)methyl carbonates and carbamates (9-26, X = O or NH, resp.) [84], Here, the [(phosphoryloxy)methyl]carbonyl carrier appears quite versatile and of potential interest to prepare prodrugs of alcohols, phenols, and amines. The cascade of reactions leading from prodrug to drug as shown in Fig. 9.8 involves three steps, namely ester hydrolysis, release of formaldehyde, and a final step of carbonate hydrolysis (X = O) or A-decar-boxylation (X = NH). Three model compounds, a secondary alcohol, a primary aliphatic amine, and a primary aromatic amine, were derivatized with the carrier moiety and examined for their rates of breakdown [84], The alcohol, indan-2-ol, yielded a carrier-linked derivative that proved relatively... 

---