Precipitated silica, effect, colloidal stability

To preserve beer colloidal stability, brewers usually remove haze-active materials [34]. To get rid of haze-active proteins, precipitation with tannic acid, hydrolysis with papain and adsorption to bentonite [35] or silica gel [36, 37] are very effective, but unfortunately in some cases, such procedures also remove foam proteins. To remove haze-active polyphenols, the most usual way is adsorption to polyvinylpolypyrrolidone-PVPP. Because of the structural analogy between these compounds and proline [38], pyrrolidone rings bind polymerized flavanoids through hydrogen and ionic bonds. 

The influence of the cations and anions has been discussed separately with the solution properties and reactions in the main focus. It has, however, been known over 100 years that anions play a crucial role for the stabilization and coagulation of colloids. More recently, the contribution of anions on the stabilization of particles, biocolloids, and bubbles has received renewed attention. - In these papers, it has been pointed out that there exists a collaborative interaction between cations and anions upon adsorption of one of the complexes from solution. At high concentrations this effect renders the simple indifferent ions specific and selective to each other. It is also seen as a dependency on the acid-base pair chosen for the regulation of the pH. This effect certainly needs to be added as an extension to (correction of) the DLVO theory. However, as shown in this paper, it is just as probable that the anion and cation collaborate during the adsorption and formation of gels and precipitates at the surface. The presence of such mixed phases has been confirmed experimentally, e.g., during the formation of hydroxoapatite in silica gel layers. ... 

Controlled hydrolysis is one of the most popular methods for processing silica spheres in the range of 10-1,000 nm. The method was developed by Stober, Fink, and Bohn (SFB) [226-229] and is based on the hydrolysis of TEOS in a basic solution of water and alcohol. Particle size depends on the reactant concentration, i.e., the TEOS/alcohol ratio, water concentration, and pH (>7). This method has been extended to other metal oxide systems with similar success, particularly for Ti02 synthesis [85,230]. The hydrous oxide particles precipitated by the hydrolysis of an alkoxide compound have the same tendency to agglomerate as that described for metal colloid systems. Different stabilizers can be used to stabilize these particles and prevent coagulation (step 2). These stabilizers control coagulation by electrostatic repulsion or by steric effects [44], similarly to the metal colloid systems. 

Precipitation into submicron-sized particles is another direct approach. Precipitation by pH shifting can be an effective approach for dyes that have weak acid functionality. A number of different families of such dyes have been dispersed by acidification of weakly alkaline dye solutions, in the presence of stabilizers such as surfactants and polymers. Alternatively, solvent shifting has been demonstrated to be an effective method of preparing absorber dye dispersions. Recent work by Brick et al. (14) has shown how such dyes can be very effectively precipitated from a variety of water-miscible organic solvents. Finally, another approach for incorporation of absorber dyes is to precipitate or condense them on the surface of a high-surface-area carrier species, such as colloidal silica. Such preparations can be prepared by pH- and solvent-shifting processes, in the presence of the carrier particles. 

---