Ceramic powders oxide

An idea to use polybasic hydroxy carboxylic acids in syntheses of oxides goes back to Pechini [3], Evaporating solutions of metal salts in citric acid at presence of ethylene glycol he obtained a polymeric resin as a precursor of target oxides. Then this process was extensively used to manufacture various ceramic oxide powders in several publications [4-8],... 

In supported metallic catalysts, the metals are usually from Groups VIII and VB of the Periodic Table. For highly dispersed metallic catalysts, the support or the carrier is usually a ceramic oxide (silica or alumina) or carbon with a high surface area, as described in chapter 2. Supported metallic catalysts can be prepared in a number of ways as described by Anderson (1975). A description of some of the methods used to prepare representative model (thin film) and practical (technological) powder systems follows. 

Two types of oxidation reactions are of interest in ceramics oxidation of metals and oxidation of sulfides. The oxidation of sulphides is a common extractive metallui cal process, generating an oxide ceramic powder. The oxide product is usually an intermediate product on the way to metal production but if sufficiently pure it can be used directly as a ceramic powder. A common example is the roasting of zinc sulphide to form zinc oxide,... 

Microwave-assisted hydrothermal synthesis is a novel powder processing technology for the production of a variety of ceramic oxides and metal powders under closed-system conditions. Komameni et al. developed this hydrothermal process into which microwaves are introduced. " This closed-system technology not... 

Chapter 1 Hydrothermal Synthesis of Ceramic Oxide Powders.3... 

K. K. Kunze and D. Segal, Modification of the pore structure of sol-gel derived ceramic oxide powders by water-soluble additives. Colloids Surfaces, (1991) 328-337. 

Figure 191. Some die-pressed parts made from metal powders, metal oxides, ferrites, ceramic materials, abrasives, and other particulate solids. (According to KOMAGE Gellner Co., Kell/Trier, FRG) ...

Conversion of the preceramic paper preform into a ceramic pro-duct involves removal of the bio-organic pulp fibers and consolidation of the inorganic filler powder compact. Oxide ceramics are formed by annealing oxide filled preceramic paper preform in air to decompose and oxidise the fibers in the temperature range of 300 - 800 °C followed by sintering at elevated temperatures (1200 - 1600 °C) non-oxide composite ceramics involve formation of a highly porous biocarbon template preform into which a liquid or gas phase is infiltrated and final consolidation during... 

Interfacial phenomena at metal oxide/water interfaces are fundamental to various phenomena in ceramic suspensions, such as dispersion, coagulation, coating, and viscous flow. The behavior of suspensions depends in large part on the electrical forces acting between particles, which in turn are affected directly by surface electrochemical reactions. Therefore, this chapter first reviews fundamental concepts and knowledge pertaining to electrochemical processes at metal oxide powder (ceramic powder)/aqueous solution interfaces. Colloidal stability and powder dispersion and packing are then discussed in terms of surface electrochemical properties and the particle-particle interaction in a ceramic suspension. Finally, several recent examples of colloid interfacial methods applied to the fabrication of advanced ceramic composites are introduced. 

Reactions of nanoscale materials are classified with respect to the surrounding media solid, liquid, and gas phases. In the solid phase, nanoscale crystals are usually connected with each other to form a powder particle (micron scale) or a pellet (milli scale) see Figure 14.1. Two or more materials (powder or pellet) are mixed and fired to form a new material. The nanosized structure is favored, due to the mixing efficiency and high reaction rate. Alloys (metals), ceramics (oxides), cement (oxides), catalysts (metals and oxide), cosmetics (oxides), plastics (polymers), and many functional materials are produced through solid reaction of nanoscale materials. One recent topic of interest is the production of superconductive mixed oxides, where control of the layered stracture during preparation is a key step. 

Uranium dioxide has a number of properties that make it suitable for a fuel. The crystal structure is the fluorite (CaF2) type, similar to that of calcia-stabilised zirconia, and is stable to temperatures in excess of 2000 °C. Because it is a ceramic oxide, the material is refractory, chemically inert and resistant to corrosion Enrichment does not change these features. The oxide powder is pressed into pellets and sintered to a density of about 95 % maximum by traditional ceramic processing technology but is carried out in conditions that minimise risks from radiation effects. The pellets are contained in zirconium alloy (zircaloy) containers, which are then introduced into the reactor. The moderator, which... 

Several companies and research labs around the world have applied the FG process with the support of PowderPro. Typical ceramic powders are oxides (AI2O3, Zr02, and Si02), nitrides (Si3N4), and carbides (SiC), but also nanopowders, diamonds, and pharmaceuticals like proteins and enzymes. 

---