Polyvinyl chloride foams

Werner, A.C., Chapter 6. "Polyvinyl Chloride Foams," in Plastic Foams, Part I, edited by K.C. Frisch and J.H. Saunders, Marcel Dekker, New York (1972). 

Foam plastic media are manufactured from polyvinyl chloride, polyurethane, polyethylene, polypropylene and the other polymer materials. The foam plastic media are economical. 

Gas-filled plastics are polymer materials — disperse systems of the solid-gas type. They are usually divided into foam plastics (which contain mostly closed pores and cells) and porous plastics (which contain mostly open communicating pores). Depending on elasticity, gas-filled plastics are conventionally classified into rigid, semi-rigid, and elastic, categories. In principle, they can be synthesized on the basis of any polymer the most widely used materials are polystyrene, polyvinyl chloride, polyurethanes, polyethylene, polyepoxides, phenol- and carbamideformaldehyde resins, and, of course, certain organosilicon polymers. 

Property ASTM Test Phenolics Foamedin Syntactic Place Castable Polyvinyl Chloride Rigid Closed Cell Phenylene Oxide Foamable Resin Polycarbonate Polystyrene Medium-Density Foam Polystyrene Molded Extruded Polyurethane Rigid Closed Cell... 

Various polymeric materials were tested statically with both gaseous and liquefied mixtures of fluorine and oxygen containing from 50 to 100% of the former. The materials which burned or reacted violently were phenol-formaldehyde resins (Bakelite) polyacrylonitrile-butadiene (Buna N) polyamides (Nylon) polychloroprene (Neoprene) polyethylene polytriflu-oropropylmethylsiloxane (LS63) polyvinyl chloride-vinyl acetate (Tygan) polyvinylidene fluoride-hexafluoropropylene (Viton) polyurethane foam. Under dynamic conditions of flow and pressure, the more resistant materials which binned were chlorinated polyethylenes, polymethyl methacrylate (Perspex) polytetraflu-oroethylene (Teflon). 

Diorganotins Catalysts for silicones, polyurethane foams polyvinyl chloride stabilizers precursor for forming Sn02 films on glass antihelminthics for poultry lubricating oil additives (Piver 1973 CEC 1978 WHO 1980 Chau etal. 1984 Blunden etal. 1985 Blunden and Chapman 1986 USPHS 1992). 

Olefins or alkenes are defined as unsaturated aliphatic hydrocarbons. Ethylene and propylene are the main monomers for polyolefin foams, but dienes such as polyisoprene should also be included. The copolymers of ethylene and propylene (PP) will be included, but not polyvinyl chloride (PVC), which is usually treated as a separate polymer class. The majority of these foams have densities <100 kg m, and their microstructure consists of closed, polygonal cells with thin faces (Figure la). The review will not consider structural foam injection mouldings of PP, which have solid skins and cores of density in the range 400 to 700 kg m, and have distinct production methods and properties (456). The microstructure of these foams consists of isolated gas bubbles, often elongated by the flow of thermoplastic. However, elastomeric and microcellular foams of relative density in the range 0.3 to 0.5, which also have isolated spherical bubbles (Figure lb), will be included. The relative density of a foam is defined as the foam density divided by the polymer density. It is the inverse of the expansion ratio . 

Thermoplastics consist of long chains of molecules, in the case of PE these are unbranched. Many of these chains together form a tangle which is more difficult to unravel the more branched the chains are. The branches are like hooks which cause the molecules to catch. Under the influence of relatively small external forces chains and parts of chains can slide across each other. PE is for instance used to make containers, chemical tubing and blow-moulded bottles. Some other thermoplastics are polypropylene (crates), polyvinyl chloride PVC (pipes) and polystyrene (foam). 

Chemical manufacturing and petroleum refining have enriched our lives. Few individuals in the developed world stop to realize how the chemical industry has improved every minute of their day. The benefits of the industries are apparent from the time our plastic alarm clock tells us to wake up from a pleasant sleep on our polyester sheets and our polyurethane foam mattresses. As our feet touch the nylon carpet, we walk a few steps to turn on a phenolic light switch that allows electrical current to safely pass through polyvinyl chloride insulated wires. At the bathroom sink, we wash our face in chemically sanitized water using a chemically produced soap. 

---