Molecular weight polyurethane

The use of Diels-Alder and platinum-catalyzed polyaddition reactions of vinylferrocene derivatives to prepare ferrocene-containing polycarbosilanes has also been described. " These reactions were also used to prepare materials with additional functional groups that led to ferrocene and silicon-containing polyesters, polyamides, and polyurethanes. Molecular weights varied in the range of 3,800-6,000 and products were liquids or elastomers. 

The thermal degradation of mixtures of the common automotive plastics polypropylene, ABS, PVC, and polyurethane can produce low molecular weight chemicals (57). Composition of the blend affected reaction rates. Sequential thermolysis and gasification of commingled plastics found in other waste streams to produce a syngas containing primarily carbon monoxide and hydrogen has been reported (58). 

Polyurethanes. About 3% of the U.S. polyurethanes market in 1988 was derived from the condensation product of polyisocyanates with low molecular weight polyadipates having hydroxyl end groups (195). In 1986 this amounted to 29,000 t, or 4% of total adipic acid consumption. The percentage was similar in Western Europe. About 90% of these adipic acid containing polyurethanes are used in flexible or semirigid foams and elastomers, with the remainder used in adhesives, coatings, and spandex fibers. 

Polymers. The molecular weights of polymers used in high energy electron radiation-curable coating systems are ca 1,000—25,000 and the polymers usually contain acryUc, methacrylic, or fumaric vinyl unsaturation along or attached to the polymer backbone (4,48). Aromatic or aUphatic diisocyanates react with glycols or alcohol-terrninated polyether or polyester to form either isocyanate or hydroxyl functional polyurethane intermediates. The isocyanate functional polyurethane intermediates react with hydroxyl functional polyurethane and with acryUc or methacrylic acids to form reactive p olyurethanes. 

Mesogenic diols, such as 4,4 -bis( CO-hydtoxyaLkoxy)biphenyls, ate used with 2,4-TDI or 1,4-diisocyanatobenzene (PPDI) to constmct Hquid crystalline polyurethanes (7). Partial replacement of the mesogenic diols by PTMG shows that the use of lower molecular weight flexible spacers form polymers that have a more stable mesophase and exhibit higher crystallinity (8). Another approach to Hquid crystal polyurethanes involves the attachment of cholesterol to the polyurethane chain utilizing the dual reactivity in 2,4-TDI (9). 

Polymeric isocyanates or PMDI ate cmde products that vary in exact composition. The main constituents are 40—60% 4,4 -MDI the remainder is the other isomers of MDI, trimeric species, and higher molecular weight oligomers. Important product variables are functionaHty and acidity. Rigid polyurethane foams are mainly manufactured from PMDI. The so-called pure MDI is a low melting soHd that is used for high performance polyurethane elastomers and spandex fibers. Liquid MDI products are used in RIM polyurethane elastomers. 

In addition, polyester polyols are made by the reaction of caprolactone with diols. Poly(caprolactone diols) are used in the manufacture of thermoplastic polyurethane elastomers with improved hydrolytic stabiHty (22). The hydrolytic stabiHty of the poly(caprolactone diol)-derived TPUs is comparable to TPUs based on the more expensive long-chain diol adipates (23). Polyether/polyester polyol hybrids are synthesized from low molecular weight polyester diols, which are extended with propylene oxide. 

Polyester and polyether diols are used with MDI in the manufacture of thermoplastic polyurethane elastomers (TPU). The polyester diols are obtained from adipic acid and diols, such as ethylene glycol, 1,4-butanediol, or 1,6-hexanediol. The preferred molecular weights are 1,000 to 2,000, and low acid numbers are essential to ensure optimal hydrolytic stabihty. Also, caprolactone-derived diols and polycarbonate diols are used. Polyether diols are... 

Step-Growth Gopolymerization. A sample of a block copolymer prepared by condensation polymerisation is shown in equation 30 (37). In this process, a prepolymer diol (HO—Z—OH) is capped with isocyanate end groups and chain extended with a low molecular-weight diol (HO—E—OH) to give a so-called segmented block copolymer, containing polyurethane hard blocks and O—Z—O soft blocks. 

---