Castable polyurethanes

An entirely new concept was iatroduced iato mbber technology with the idea of "castable" elastomers, ie, the use of Hquid, low molecular-weight polymers that could be linked together (chain-extended) and cross-linked iato mbbery networks. This was an appealing idea because it avoided the use of heavy machinery to masticate and mix a high viscosity mbber prior to mol ding and vulcanization. In this development three types of polymers have played a dominant role, ie, polyurethanes, polysulftdes, and thermoplastic elastomers. 

Properties. Polyurethane elastomers generally exhibit good resiHence and low temperature properties, excellent abrasion resistance, moderate solvent resistance, and poor hydrolytic stabiHty and poor high temperature resistance. As castable mbber, polyurethanes enjoy a variety of uses, eg, footwear, toys, soHd tires, and foam mbber. 

Property ASTM Test Phenolics Foamedin Syntactic Place Castable Polyvinyl Chloride Rigid Closed Cell Phenylene Oxide Foamable Resin Polycarbonate Polystyrene Medium-Density Foam Polystyrene Molded Extruded Polyurethane Rigid Closed Cell... 

Example 10. Two-Component, Nonsagging, Polyurea Structural Adhesive. This example is an all-urea formulation unusual for a 100% solids, hand-castable system. It is also a two-component, one-shot system designed to be nonsagging so that it may be applied to nonhorizontal surfaces without dripping or running. This and similar examples are described in U.S. Patent 5,654,085. See also Guether et al., presented at Polyurethanes Conference 2000, October 8—11, 2000 CRC Press Boca Raton, FL, 2000. 

Linear polyurethanes, 26 Linear step-growth polymerizations, 13 Lipase-catalyzed polyesterifications, 83 Lipases, 82, 84 catalytic site of, 84 Liquefied MDIs, 211, 226-227 Liquid carbon dioxide, 206 Liquid-castable systems, 201 Liquid crystal devices (LCDs), alignment coating for, 269-270 Liquid crystalline aromatic polyesters, 35 Liquid crystalline polyesters, 25, 26, 48-53... 

Dichlorobenzidine is also used with 4,4 -methylenebis (2-chloroaniline) as a curing agent for liquid-castable polyurethane elastomers (HSDB 1996). 

This book is studying the castable family of polyurethanes. The cured polyurethane elastomer is made from three main ingredients that are detailed in Table 2.1. 

The isocyanates form the major part of the hard or rigid phase of the polyurethane. The three main isocyanates used in industry for castable materials are toluene diisocyanate (TDI), 4,4 diphenylmethane diisocyanate (MDI), and 1,5-naphthalene diisocyanate(NDI). Aliphatic diisocyanates form a small segment of the diisocyanate market. 

---