Polytetrafluoroethylene transfer film

Wheeler, D.R. "Polytetrafluoroethylene Transfer Film Studied With X-Ray Photoelectron Spectroscopy," NASA TP-1728, November... 

Silicone PSA products are used in a number of medical and industrial appKcations, ranging from a variety of PSA tapes and transfer films to automotive bonding. Advantages for the silicone PSA products include resistance to temperature extremes, chemical resistance, conformity to irregular surfaces, and electrical properties. They are also unique to most PSAs in their ability to adhere to difficult low-energy substrates, such as polytetrafluoroethylene and other silicones. 

Q. Lu and S.S. Hu, Studies on direct electron transfer and biocatalytic properties of haemoglobin in polytetrafluoroethylene film. Chem, Phys. Lett. 424, 167-171 (2006). 

When a glass plate which is heated e.g. at 130°C is rubbed with a polytetrafluoroethylene (PTFE) briquette, a highly oriented thin film (2— 100 nm thick) of PTFE can be made on the plate such a film is termed a friction-transfer layer [24]. This method is applicable to make thin oriented layers of other polymers. Various kinds of organic compormds can be oriented on the PTFE friction-transfer layer from vapor phase, from solutions and from the melts [24]. 

The adhesive transfer of organic plastics has some special features of it own. Makinson and Tabor [24] observed that polytetrafluoroethylene sliding on glass left transferred material on the counter surface in the form of lumps, ribbons, sheets or very thin films, depending on the rubbing conditions. Pooley and Tabor [25], who studied the transfer process more intensively, also reported the behavior of other polymers such as fluorocarbon copolymers, polyethylene, polypropylene, polystyrene, polymethylmethacrylate and polyvinyl chloride. Descriptions of transfer in relation to wear were reported for PTFE by Tanaka tt ai. [20] and for polyethylene by Miller a.1. [21]... 

---