Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polystyrene PDMS composite

Figure 8.8 Stress-strain isotherms for PDMS-polystyrene (PS) composites.50 Each curve is labeled with the wt % PS present in the composite, and the dashed fines locate the relatively linear portions of the curves useful for quantitative interpretations.129... Figure 8.8 Stress-strain isotherms for PDMS-polystyrene (PS) composites.50 Each curve is labeled with the wt % PS present in the composite, and the dashed fines locate the relatively linear portions of the curves useful for quantitative interpretations.129...
There is interest in synthesizing polysiloxane in environmentally friendly supercritical carbon dioxide- " Studies of the interactions between PDMS and supercritical carbon dioxide have been reported. Tfiis medium has also been used in the preparation of composites between PDMS and polystyrene and nanoclays. Supercritical fluids have been used to study various properties including surface behavior and carrying out depth analyses in PE/PDMS composites. ... [Pg.99]

Chen, Gardella and Kumler106 have studied a series of polydimethylsiloxane-polystyrene block copolymers and examined the surface composition by ATR-FTIR and XPS. For AB-type PS-PDMS diblock copolymers (26) with siloxane block molecular weights of between 38,000 and 99,000, the surface was found to be exclusively polydimethylsiloxane down to a depth of 10 nm by XPS. ATR-FTIR, which samples... [Pg.2234]

Electrical conductivity measurements have been reported on a wide range of polymers including carbon nanofibre reinforced HOPE [52], carbon black filled LDPE-ethylene methyl acrylate composites [28], carbon black filled HDPE [53], carbon black reinforced PP [27], talc filled PP [54], copper particle modified epoxy resins [55], epoxy and epoxy-haematite nanorod composites [56], polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) blends [57], polyacrylonitrile based carbon fibre/PC composites [58], PC/MnCli composite films [59], titanocene polyester derivatives of terephthalic acid [60], lithium trifluoromethane sulfonamide doped PS-block-polyethylene oxide (PEO) copolymers [61], boron containing PVA derived ceramic organic semiconductors [62], sodium lanthanum tetrafluoride complexed with PEO [63], PC, acrylonitrile butadiene [64], blends of polyethylene dioxythiophene/ polystyrene sulfonate, PVC and PEO [65], EVA copolymer/carbon fibre conductive composites [66], carbon nanofibre modified thermotropic liquid crystalline polymers [67], PPY [68], PPY/PP/montmorillonite composites [69], carbon fibre reinforced PDMS-PPY composites [29], PANI [70], epoxy resin/PANI dodecylbenzene sulfonic acid blends [71], PANI/PA 6,6 composites [72], carbon fibre EVA composites [66], HDPE carbon fibre nanocomposites [52] and PPS [73]. [Pg.110]

The use of polymeric catalytic membranes in distributor/contactor-type reactors for hydrogenation or oxidation reactions has been widely described in several former and recent reviews. Mixed-matrix membranes of PDMS hlled with Pd particles, composite membranes of ionic liquid-polymer gels filled with Pd/C, ° ionic liquids containing rhodium complexes and supported in polystyrene sheets in a corrugated configuration, have been used for the selective gas-phase hydrogenation of hydrocarbons in contactor-type membrane reactors. [Pg.20]

See other pages where Polystyrene PDMS composite is mentioned: [Pg.64]    [Pg.255]    [Pg.65]    [Pg.49]    [Pg.57]    [Pg.268]    [Pg.94]    [Pg.192]    [Pg.163]    [Pg.310]    [Pg.37]    [Pg.303]    [Pg.704]    [Pg.704]    [Pg.403]    [Pg.167]    [Pg.244]    [Pg.169]    [Pg.169]    [Pg.172]    [Pg.403]    [Pg.175]    [Pg.226]    [Pg.242]    [Pg.217]    [Pg.749]    [Pg.313]    [Pg.663]   
See also in sourсe #XX -- [ Pg.99 ]



SEARCH



PDMS

© 2024 chempedia.info