Polysiloxanes terminated

In the second technique, polysiloxanes terminated by hydroxy groups are either (1) acetylated, (2) converted to ketoximes, or (3) etherified. The crosslinking is activated by reaction with atmospheric moisture ... 

Two main types of siUcone elastomer systems are used in biomedical prosthetics polysiloxanes terminated with hydroxyl groups and their subsequent polycondensation is the basis of room-temperature vulcanizing (RTV) systems in which tin compounds are used as catalysts. Another RTV or heat-cured system is based on unsaturated (vinyl) terminated polysiloxanes that undergo polyaddition reactions with the aid of a platinum catalyst. 

Mark and his co-workers reported the reinforcement of poly(dimethylsiloxane) networks by silica gel particles [1-6]. For example, bis(silanol)-terminated poly-(dimethylsiloxane) was reacted with tetraethoxysilane in the presence of acid-catalyst to produce the reinforced siloxane networks. The reaction proceeded homogeneously. The content of the silica filler can be controlled by the feed ratio of polysiloxane and tetraethoxysilane. 

Linear polysiloxanes containing terminal function groups such as alkoxy groups, chlorine atoms are technically prepared by equilibration of cyclic polysiloxanes with functional silicone compounds291. ... 

Because of the interest in the polyurethane industry with respect to grafting, extensive studies were made on the preparation of polydimethyl sfloxane-polyoxy-alkylene block copolymers by coupling of polyethergtycol and polysiloxanes with functional terminal groups408. ... 

Detailed information on the copolymerization of cyclic trifluoropropylmethyl-siloxane trimer and octamethylcyclotetrasiloxane is also very limited in the open literature26 27 . Recently, preparation of various amine terminated (dimethyl-tri-fluoropropyl,methyl)siloxane oligomers with varying molecular weights and backbone compositions has been reported 69115 ll7). Table 11 shows various properties of the oligomers produced as a function of composition. These types of modification play very important roles in determining the solubility characteristics and hence the compatibility of resultant polysiloxanes with other conventional organic monomers... 

Poly(arylester)-polysiloxane multiblock copolymers have also been synthesized by the interfacial polymerization of aminopropyl terminated polysiloxane oligomers with bisphenol-A and a mixture of isophthaloyl and terephthaloyl chlorides117, 193-1951 as illustrated in Reaction Scheme XV. In these reactions the poly(arylester) blocks are formed in situ during the copolymerization, so the control of their block sizes is not very precise. It is also important to note that since aminopropyl terminated siloxane oligomers are employed, the linkages which connect the arylester and siloxane blocks are amide linkages. 

Hydrosilation reactions have been one of the earlier techniques utilized in the preparation of siloxane containing block copolymers 22,23). A major application of this method has been in the synthesis of polysiloxane-poly(alkylene oxide) block copolymers 23), which find extensive applications as emulsifiers and stabilizers, especially in the urethane foam formulations 23-43). These types of reactions are conducted between silane (Si H) terminated siloxane oligomers and olefinically terminated poly-(alkylene oxide) oligomers. Consequently the resulting system contains (Si—C) linkages between different segments. Earlier developments in the field have been reviewed 22, 23,43> Recently hydrosilation reactions have been used effectively by Ringsdorf 255) and Finkelmann 256) for the synthesis of various novel thermoplastic liquid crystalline copolymers where siloxanes have been utilized as flexible spacers. Introduction of flexible siloxanes also improved the processibility of these materials. 

Siloxane containing polyester, poly(alkylene oxide) and polystyrene type copolymers have been used to improve the heat resistance, lubricity and flow properties of epoxy resin powder coatings 43). Thermally stable polyester-polysiloxane segmented copolymers have been shown to improve the flow, antifriction properties and scratch resistance of acrylic based auto repair lacquers 408). Organohydroxy-terminated siloxanes are also effective internal mold release agents in polyurethane reaction injection molding processes 409). 

There are various routes to vinyl macromonomers [Gnanou and Taton, 2002]. For example, the reaction of an HO-terminated polymer such as polysiloxane, polycaprolactone, or poly-tetrahydrofuran with acryloyl chloride... 

---