Polypyrrole/polyamide composite

Another polypyrrole/polyamide composite film was obtained by the electrode coating method [84]. In this work the polyamide film was obtained in situ by coating a stainless steel electrode with a polyamic acid film followed by imidization with pyridine and acetic anhydride. The coated electrode was submitted to a constant current in a pyrrole/LiC104 solution in acetonitrile. The surface conductivity measured after detaching the composite film from the electrode showed a strong dependence on the charge density used in the synthesis, i.e. on the amount of pyrrole polymerized in the composite. The maximum value obtained was 2 S cm . Combination of polypyrrole with this polyamide was shown to increase markedly its thermal and environmental stability. 

Some measurements of this property have been made in a range of electrically conducting polymers. These include epoxy resin/polyaniline-dodecylbenzene sulfonic acid blends [38], polystyrene-black polyphenylene oxide copolymers [38], semiconductor-based polypyrroles [33], titanocene polyesters [40], boron-containing polyvinyl alcohol [41], copper-filled epoxy resin [42], polyethylidene dioxy thiophene-polystyrene sulfonate, polyvinyl chloride, polyethylene oxide [43], polycarbonate/acrylonitrile-butadiene-styrene composites [44], polyethylene oxide complexes with sodium lanthanum tetra-fluoride [45], chlorine-substituted polyaniline [46], polyvinyl pyrolidine-polyvinyl alcohol coupled with potassium bromate tetrafluoromethane sulfonamide [47], doped polystyrene block polyethylene [38, 39], polypyrrole [48], polyaniline-polyamide composites [49], and polydimethyl siloxane-polypyrrole composites [50]. 

F. Granato, A. Bianco, C. Bertarelli, and G. Zerbi, Composite polyamide 6/polypyrrole conductive nanofibers, Macromolec. Rapid Commun., 30, 453 58 (2009). 

Structural studies of polymer surfaces. Materials that have been studied include PMMA [239], PMMA-polypyrrole composites [240], polyfchloromethyl styrene) honnd 1,4,8,11-tetrazacyclotetradecane, polyfchloromethyl styrene) honnd thenoyl triflnoroacetone [241], poly(dimethyl siloxane)-polyamide copolymers [242], PS [243], ion-implanted PE [244], monoazido-terminated polyethylene oxide [245], polynrethanes [246], polyaniline [247], flnorinated polymer films [248], poly(o-tolnidine) [249], polyetherimide and poly benzimidazole [250], polyfnllerene palladinm [251], imidazole-containing imidazolylethyl maleamic acid-octadecyl vinyl ether copolymer [252], polyphenylene vinylene ether [253], thiophene oligomers [254], flnorinated styrene-isoprene derivative of a methyl methacrylate-hydroxyethyl methacrylate copolymer [255], polythiophene [256], dibromoalkane-hexaflnorisopropylidene diphenol and bisphenol A [257], and geopolymers [258]. 

Electrical properties have been reported on numerous carbon fiber-reinforced polymers, including carbon nanoflber-modified thermotropic liquid crystalline polymers [53], low-density polyethylene [54], ethylene vinyl acetate [55], wire coating varnishes [56], polydimethyl siloxane polypyrrole composites [50], polyacrylonitrile [59], polycarbonate [58], polyacrylonitrile-polycarbonate composites [58], modified chrome polymers [59], lithium trifluoromethane sulfonamide-doped polystyrene-block copolymer [60], boron-containing polyvinyl alcohols [71], lanthanum tetrafluoride complexed ethylene oxide [151, 72, 73], polycarbonate-acrylonitrile diene [44], polyethylene deoxythiophe-nel, blends of polystyrene sulfonate, polyvinyl chloride and polyethylene oxide [43], poly-pyrrole [61], polypyrrole-polypropylene-montmorillonite composites [62], polydimethyl siloxane-polypyrrole composites [63], polyaniline [46], epoxy resin-polyaniline dodecyl benzene sulfonic acid blends [64], and polyaniline-polyamide 6 composites [49]. 

---