Polyphenylene oxide mechanical properties

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

Polyphenylene oxide (PPO) or Polyphenylene ether (PPE) is an amorphous polymer with a softening temperature of about 210 °C. To improve its processability it is mostly blended with PS (modified PPE, e.g. Noryl ), which is at the cost of its heat distortion temperature. The properties are excellent the applications are mainly in fine-mechanical construction, in automotive parts, in household equipment etc. 

Property data for GRTP s are presented in two major breakouts. In the first breakout, the basic resins—styrene acrylonitrile (SAN), polycarbonate, polysulfone, polyacetal, polypropylene, polyphenylene oxide (PPG), nylon, modified PPG, and polyvinyl chloride—are treated as the independent variables and the physical, mechanical, electrical, thermal, chemical, and weathering characteristics are treated as the dependent variables. In the second breakout, the functional relationships are reversed, te., the properties are the independent variable and the resins are the dependent variable. ASTM test methods by which the physical values were determined are listed. The. physical data versus resins are presented in both tabular and graphic form. 

TABLE 3-83. PHYSICAL AND MECHANICAL PROPERTIES OF MODIFIED POLYPHENYLENE OXIDE... 

Physical and Mechanical Properties ofModified Polyphenylene Oxide. 3-229... 

Exterior door handles are another application that has turned to plastics to balance chemical resistance and mechanical properties. Many filled thermoplastics such as blends of PC and polybutylene terephthalate (PBT), polyethylene terephthalate (PET), and nylon have been tried or used in this application, with nylon as the clear wirmer. Exterior mirror housings likewise use many thermoplastic solutions such as ABS, PC/ABS, blends of polyphenylene oxide (PPO) and polystyrene (PS), nylon, blends of PP and ethylene propylene diene monomer (EPDM), and weatherable ABS. Again, nylon clearly dominates this application in terms of volume. Many other exterior parts continue to adopt thermoplastic solutions. Figure 14 shows an impingement shield constructed from LGF PP. 

Polyphenylene oxide (PPO) thermoplastic polymer with good electrical and mechanical properties and excellent dimensional stability over a wide range of temperatures. Uses include medical equipment, electronic components, hot water controls, etc. 

---