Polymers polysaccharide, temperature

PolysuWde Process. One modification to the kraft process being appHed commercially is the polysulfide process (38). Under alkaline conditions and relatively low temperature (100—120°C), polysulfides oxidize the active end group of the polysaccharide polymer to an alkaH-stable aldonic acid. This reaction, known for many years (39), was not produced on a commercial scale until the development of an efficient method for in situ generation of the polysulfide in kraft white Hquor. 

Microbial polysaccharides in solution lose their ordered conformation on heating. The temperature at which the polymer melts to a disordered state is known as the melting temperature (Tm) and is determined by a variety of factors ... 

Durand, A. 2007. Aqueous solutions of amphiphilic polysaccharides Concentration and temperature effect on viscosity. European Polymer Journal 43,1744-1753. 

Different types of gel materials, such as polysaccharides, proteins and synthetic polymers, are now used to entrap biocatalysts. Among them, photo-crosslinkable resin prepolymer ENTP-4000 as shown in Eig. 7 is more useful compared to others. Entrapment of biocatalysts should be carried out under the illumination of near ultraviolet hght within 3-5 min, by which high temperatures, shifts of pH to extremely alkahne or acidic sides are avoided. ENTP-4000, hydrophobic photo-crosslinkable resin prepolymer, is one of the most suitable prepolymers for entrapment of p-glucosidase. Molecular weight of its main chain is about 4000. 

Most of the xanthan gum used in oil field applications is in the form of a fermentation broth containing 8% to 15% polymer. The viscosity is less dependent on the temperature in comparison with other polysaccharides. 

Stabilizing agents are used to maintain drilling fluid rheological properties at highly elevated downhole temperatures. Chromium and chromium-free lignosulfonates, polyglycol ethers, sodium polystyrene sulfonate-co-maleic anhydride), and a melanin polymer have been used in this application. Additives such as sodium diethyldi-thiocarbamate have been used to stabilize aqueous polysaccharides such as xanthan gum (18). 

Another method of sand control is use of a silicon halide which reacts with water at the surface of sand grains forms SiO which can bond the grains together (55). Reducing the cost of sand consolidation could be very useful since the applicability of gravel packing methods is limited by the bottom hole circulating temperature and the limited temperature stability of polysaccharide polymers. 

---