Polymers furanics

They are all soluble in concentrated H2SO4, and most are soluble in NMP, DMAc, pyridine, and m-cresol at room temperature. The order of decreasing solubility is pyrrole-containing polymers > furan-containing polymers > thiophene-containing polymers. 

Furan resin. See Furan polymer Furan, tetrahydro-. See Tetrahydrofuran 3-Furanthiol, 2,5-dimethyl-. See 2,5-Dimethyl-3-furanthiol... 

Aqueous ring-opening metathesis polymerization (ROMP) was first described in 1989 (90) and it has been appHed to maleic anhydride (91). Furan [110-00-9] reacts in a Diels-Alder reaction with maleic anhydride to give exo-7-oxabicyclo[2.2.1]hept-5-ene-2,3—dicarboxylate anhydride [6118-51 -0] (24). The condensed product is treated with a soluble mthenium(Ill) [7440-18-8] catalyst in water to give upon acidification the polymer (25). Several apphcations for this new copolymer have been suggested (91). 

Synthetic Resins. Various polymers and resins are utilized to produce some specialty carbon products such as glassy carbon or carbon foam and as treatments for carbon products. Typical resins include phenoHcs, furan-based polymers, and polyurethanes. These materials give good yields of carbon on pyrolysis and generally carbonize directly from the thermoset polymer state. Because they form Httle or no mesophase, the ultimate carbon end product is nongraphitizing. 

Furan, 2,3-dihydro-5-methyl-polymers, 1, 276 Furan, 2,3-dihydro-3-methylene- H NMR, 4, 577 Furan, 2,5-dihydro-2-methylene- H NMR, 4, 577 tautomerism aromaticity and, 4, 595 Furan, 2,5-dihydro-2-nitro-structure, 4, 550 Furan, 2,3-dihydroxy-tautomerism, 4, 37 Furan, 2,4-dihydroxy-tautomerism, 4, 37 Furan, 3,4-dihydroxy-tautomerism, 4, 37 Furan, 2,5-diiodo-nitration, 4, 602 synthesis, 4, 712 Furan, 3,4-diiodo-reactions, 4, 650 Furan, 2,3-dimethoxy-synthesis, 4, 625, 648 Furan, 2,5-dimethoxy-synthesis, 4, 648 Furan, 3,4-dimethoxy-cycloaddition reactions, 4, 64, 625 lithiation, 4, 651 reactions... 

Furfural — see Furan-2-oarbaldehyde, 532 Furfuryl acetate, o -(butoxycarbonyl)-anodic oxidation, 1, 424 Furfuryi acrylate polymerization, 1, 279 Furfuryl alcohol configuration, 4, 544 2-Furfuryl alcohol polyoondensation, 1, 278 reactions, 4, 70-71 Furfuryl alcohol, dihydro-pyran-4-one synthesis from, 3, 815 Furfuryl alcohol, tetrahydro-polymers, 1, 276 rearrangement, 3, 773 Furfuryl chloride reactions... 

GANDiNi, A. furan resins , Encyclopedia of Polymer Science and Technology (2nd Edition), Vol. 7, pp. 454-73, John Wiley, New York (1987)... 

Group of plastics composed of resins in which the furane ring is an integral portion of the polymer chain made from polymerization or polyconden-sation of furfural, furfural alcohol and other compounds containing furane rings also formed by reaction of furane compounds with an equal weight or less of other compounds. 

Ryder reported the preparation of an interesting alkyl diaryl furan that was subsequently polymerized and studied as a conducting polymer. The monomer furan 49 was available fron the acid catalyzed cyclization of dione 48. ... 

Photoinduced transformations of photochromes (spiropyrans, furan-derived fulgides, dithienylethenes) in polymers 98PAC2157. 

The highest mechanical strengths are usually obtained when the fibre is used in fine fabric form but for many purposes the fibres may be used in mat form, particularly glass fibre. The chemical properties of the laminates are largely determined by the nature of the polymer but capillary attraction along the fibre-resin interface can occur when some of these interfaces are exposed at a laminate surface. In such circumstances the resistance of both reinforcement and matrix must be considered when assessing the suitability of a laminate for use in chemical plant. Glass fibres are most commonly used for chemical plant, in conjunction with phenolic resins, and the latter with furane, epoxide and, sometimes, polyester resins. 

IV. The Transformation of Poly(vinylalcohol) into Furan Polymers. .. 85... 

This second classification is not rigorous since often the polymer structure is not defined by only one type of repeat unit and the furan ring is encountered both in the backbone and as a side group. However, it is felt that the practical convenience of this classification outweight its minor inconsistencies. 

All polymers described in this chapter bear the furan ring in the chain s backbone, and are the result of step growth reactions which involve the elimination of a condensation product. 

The furan ring can be made to polymerize through one or both of its double bonds and the polymers obtained will therefore have dihydro- and tetrahydrofuran rings in their backbone. This situation occurs when furan, the alkylfurans, benzofuran and some dihydrofurans are treated with suitable initiators and is discussed in the first section of this chapter. 

If on the other hand the polymerization of a furan derivative takes place through a substituent containing an adequate functionality, such as C=C or C=0, the furan ring should in principle conserve its structure and the polymers obtained will bear it as a side group. It has been found, however, that in some of these systems the normal propagation is accompanied by other reactions which involve participation of the ring and which therefore alter the normal structure of the macromolecule. The second section of this chapter deals with monomers, such as 2-vinylfuran and 2-furaldehyde, which exhibit this general behaviour. 

---