Polymeric films extrusion molded

Products Homopolymers can be produced with melt flows from less than 0.1 to 3,000 and isotactic content up to 99%. Random copolymers can be produced with up to 12 wt% ethylene or up to 21 wt% butene over a wide melt flow range (<0.1 to >100). A full range of impact copolymers can be polymerized with a good stiffness to impact balance. Products from narrow to broad molecular-weight distribution can be manufactured in grades suitable for film injection, molding, blow molding, extrusion and textile applications. 

A full range of impact copolymers can be polymerized with excellent stiffness for even the most demanding applications. Products from narrow to broad molecular-weight distribution can be manufactured in grades with proven advantage for film injection, molding, blow molding, extrusion and textile applications. 

Film, injection molding, sheet extrusion, and polypropylene polymerization... 

There are some other ways to apply coatings without the use of solvents. Plastisols315 involve the use of a paste of polyvinyl chloride particles in a plasticizer. Metal objects dipped in this can then be heated to harden the coating by dissolution of the plasticizer into the polymer. An example would be a wire rack for a dishwasher. Colored paint films can be laminated to plastics such as automobile parts and siding for houses by molding.316 Ideally, the dry paint film would be prepared by extrusion or other means that avoided the use of solvent. It is also possible to produce a coating from two monomer ingredients that polymerize in... 

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acrylic sheet. PMMA is also used in molding and extrusion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acrylic latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic structure, acetone is found in the following major end use products acrylic sheet molding resins, impact modifiers and processing aids, acrylic film, ABS and polyester resin modifiers, surface coatings, acrylic lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see Methacrylic acid and derivatives Methacrylic polymers). 

Styrenic Resins Styrenic resins are thermoplastics prepared by firee-radical polymerization of styrene alone or with other unsaturated monomers. The properties of styrenic resins vary widely with molecular structure, attaining the high performance level of engineering plastics. Processed by blow and injection molding, extrusion, thermoforming, film techniques, and structural foam molding. Used heavily for the manufacture of automotive parts. 

Uses Compatibilizer in blends and alloys polymeric coupling agent in reinforced or recycled PE or PP, adhesives, sealants extrusion coating resin cable/wire Jacketing pipe/profile extrusions film (sacks, food wrap, earner bags) inj. mold goods (toys, elec, fittings, bushes, seals, components) rotationally molded tanks, boats textile adhesives hot melts... 

---