Carbon backbone polymers

A nearly identical polysfyrene sample was prepared, but with imiform labeling of all the polymer backbone carbons. This permitted the use of the pulse sequences shown in Figure 18. The nmning of these sequences follows the convention used by those working in the protein structure area. Listing the atoms in the coherence transfer pathway forms the acronym. Those atoms in the coherence transfer pathway whose chemical shifts are not encoded during... 

Since the monomers are specified to be vinyl monomers, each contributes two carbon atoms to the polymer backbone, with the associated extended length of 0.252 nm per repeat unit. Therefore the total extended length of the empirical formula unit is... 

For a carbon-carbon bond located along a polymer backbone, the preceding molecular representation must be modified to Fig. 1.8c. The chain segments on either side of the bond of interest are substituents for which the amount of steric hindrance follows a slightly different pattern than for the unsubstituted ethane. Using the same convention for [Pg.58]

Complications arising from other types of isomerism. Positional and geometrical isomerism, also described in Sec. 1.6, will be excluded for simplicity. In actual polymers these are not always so easily ignored. Polymerization of 1,2-disubstituted ethylenes. Since these introduce two different asymmetric carbons into the polymer backbone (second substituent Y), they have the potential to display ditacticity. Our attention to these is limited to the illustration of some terminology which is derived from carbohydrate nomenclature (structures [IX]-[XII]) ... 

The first phosphazene polymers containing carbon (79), sulfur (80,81), and even metal atoms (82) in the backbone have been reported. These were all prepared by the ring-opening polymerization of partially or fully chloro-substituted (or fluoro-substituted) trimers containing one hetero atom substituting for a ring-phosphoms atom in a cyclotriphosphazene-type ring. 

The most innovative photohalogenation technology developed in the latter twentieth century is that for purposes of photochlorination of poly(vinyl chloride) (PVC). More highly chlorinated products of improved thermal stabiUty, fire resistance, and rigidity are obtained. In production, the stepwise chlorination may be effected in Hquid chlorine which serves both as solvent for the polymer and reagent (46). A soHd-state process has also been devised in which a bed of microparticulate PVC is fluidized with CI2 gas and simultaneously irradiated (47). In both cases the reaction proceeds, counterintuitively, to introduce Cl exclusively at unchlorinated carbon atoms on the polymer backbone. 

Polymers containing long alkyl side chains, typically between 16 and 22 carbon atoms in length, have been used extensively as low adhesion backsizes for PSA tape products for many years. The general structure of such polymers is shown schematically in Fig. 8. The alkyl side chains are attached through a bridging group, R, to the polymer backbone, and the backbone may contain comonomers,... 

Most rubbers used in adhesives are not resistant to oxidation. Because the degree of unsaturation present in the polymer backbone of natural rubber, styrene-butadiene rubber, nitrile rubber and polychloroprene rubber, they can easily react with oxygen. Butyl rubber, however, possesses small degree of unsaturation and is quite resistant to oxidation. The effects of oxidation in rubber base adhesives after some years of service life can be assessed using FTIR spectroscopy. The ratio of the intensities of the absorption bands at 1740 cm" (carbonyl group) and at 2900 cm" (carbon-hydrogen bonds) significantly increases when the elastomer has been oxidized [50]. 

In LLDPE, the type of alpha-olefin comonomer determines the length of the SCBs. While being incorporated into the polymer chains, two of the carbon atoms of the comonomer become part of the polymer backbone (Table 1). 

Grafting reactions onto a polymer backbone with a polymeric initiator have recently been reported by Hazer [56-60]. Active polystyrene [56], active polymethyl methacrylate [57], or macroazoinitiator [58,59] was mixed with a biopolyester polyhydroxynonanaate [60] (PHN) or polybutadiene to be carried out by thermal grafting reactions. The grafting reactions of PHN with polymer radicals may proceed by H-abstraction from the tertier carbon atom in the same manner as free radical modification reactions of polypropylene or polyhy-droxybutyratevalerate [61,62]. 

Nearly all of the polymers produced by step-growth polymerization contain heteroatoms and/or aromatic rings in the backbone. One exception is polymers produced from acyclic diene metathesis (ADMET) polymerization.22 Hydrocarbon polymers with carbon-carbon double bonds are readily produced using ADMET polymerization techniques. Polyesters, polycarbonates, polyamides, and polyurethanes can be produced from aliphatic monomers with appropriate functional groups (Fig. 1.1). In these aliphatic polymers, the concentration of the linking groups (ester, carbonate, amide, or urethane) in the backbone greatly influences the physical properties. 

Copolymerization e.g., of 1-butene or 1-hexene with ethylene, gives short-chain branching-, e.g., the branches contain three or five carbon atoms. The random location of the side-chains lowers the crystallinity and density. Long-chain branching refers to branches that are similar in length to the polymer backbone and this type occurs in polyethylene manufactured using the... 

This review has shown that the analogy between P=C and C=C bonds can indeed be extended to polymer chemistry. Two of the most common uses for C=C bonds in polymer science have successfully been applied to P=C bonds. In particular, the addition polymerization of phosphaalkenes affords functional poly(methylenephosphine)s the first examples of macromolecules with alternating phosphorus and carbon atoms. The chemical functionality of the phosphine center may lead to applications in areas such as polymer-supported catalysis. In addition, the first n-conjugated phosphorus analogs of poly(p-phenylenevinylene) have been prepared. Comparison of the electronic properties of the polymers with molecular model compounds is consistent with some degree of n-conjugation in the polymer backbone. 

The thermal properties of tyrosine-derived poly(iminocarbonates) were also investigated. Based on analysis by DSC and thermogravi-metric analysis, all poly(iminocarbonates) decompose between 140 and 220 C. The thermal decomposition is due to the inherent instability of the iminocarbonate bond above 150°C and is not related to the presence of tyrosine derivatives in the polymer backbone. The molecular structure of the monomer has no significant influence on the degradation temperature as indicated by the fact that poly(BPA.-iminocarbonate) also decomposed at about 170 C, while the structurally analogous poly(BPA-carbonate) is thermally stable up to 350 C. 

An elastomer is a polymer that is flexible, allowing it to be distorted from one shape to another. Polyisoprene (natural mbber), polybutadiene, and butadiene-styrene copolymer are the most important commercial elastomers. All contain some CDC bonds, and their bulk properties are affected by the varying geometries about the carbon atoms that make up the polymer backbone. 

XH NMR also provides evidence that the predominant mode of. bond cleavage is at the bond opposite to the backbone carbon in the polymer. If the bond adjacent to the backbone carbon had been broken this... 

---