Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polyisobutylene rubbers

Puskas, J.E., Paulo, C., and Altstadt, V. Mechanical and viscoelastic characterization of hyperbranched polyisobutylenes. Rubber Chem. TechnoL, 75, 853-864, 2002. [Pg.218]

Polyisobutylene rubber Butyl rubber Halobutyl rubber Polyepichlorohydrin Polypropylene Polypropylene oxide... [Pg.440]

L.K. Massey, "Polyisobutylene rubber," in Permeability Properties of Plastics and Elastomers A Guide to Packaging and Barrier Materials, chapter 80, p. 469. William Andrew Publishing, Norwich, NY, 2nd edition, 2003. [Pg.184]

Polyvinyl chloride, rigid/plasticized laminate (top temperature 140°F) Polypropylene (and system to bond it without laminate backing) Polyisobutylene rubber (top temperature 180°F),and probably others... [Pg.123]

Chemical resistance data for polyisobutylene rubber is available from Braas, Mannheim, West Germany. [Pg.128]

Cellulose acetate natural rubber (latex), polyisobutylene rubber, neoprene rubber, polyvinyl acetate, ethylene vinyl acetate, polyacrylate (carboxylic), cyanoacrylate, polyamide (versamid), phenoxy, polyester + isocyanate, nitrile-phenolic, polyurethane, and resorcinol-formaldehyde. [Pg.143]

Suggested adhesives include modified acrylics, epoxies, polyesters, resorcinol-formaldehyde, furane, phenol-formaldehyde, polyvinyl formal-phenolic, polyvinyl butyral, nitrile rubber-phenolic, polyisobutylene rubber, polyurethane rubber, reclaimed rubber, melamine-formaldehyde, epoxy-phenolic, and cyanoacrylates. For maximum adhesion primers should be used. Nitrile-phenoUcs give excellent bonds if cured under pressure at temperatures of 149 C. Lower-strength bonds are obtained with most rubber-based adhesives. [Pg.150]

Phenylene oxide-based resins (Noryl ) epoxy, polyisocyanate, polyvinyl butyral, nitrile rubber, neoprene rubber, polyurethane rubber, polyvinyUdene chloride, and acrylic. Polyethylene-nitrile rubber, polyisobutylene rubber, flexible epoxy, nitrile-phenolic, and water-based (emulsion) adhesives. Polystyrene for these foams (expanded polystyrene (EPS)), aromatic solvent adhesives (e.g., toluol) can cause collapse of the foam cell walls. For this reason, it is advisable to use either 100% solids adhesives or water-based adhesives based on SBR or polyvinyl acetate. Specific adhesives recommended include urea-formaldehyde, epoxy, polyester-isocyanate, polyvinyl acetate, vinyl chloride-vinyl acetate copolymer, and reclaim rubber. Polystyrene foam can be bonded satisfactorily with any of the following general adhesive types ... [Pg.152]

PVC epoxy, polyester-isocyanate, unsaturated polyester, vinyl chloride-acetate copolymer, polyvinyl acetate, polyvinyl alkyl ether, ethylene-vinyl acetate, nitrile rubber-phenolic, neoprene rubber, polyisobutylene rubber, polyurethane rubber, and polysulfide rubber. See discussion in Section 6.3.28 concerning migration of plasticizers in PVC. [Pg.153]

Polyisobutylene rubbers can be compounded with resins to raise the Tg and hence peel adhesion. [Pg.106]

Polyethylene-nitrile rubber, polyisobutylene rubber, flexible epoxy, nitrile-phenolic, and water-based (emulsion) adhesives... [Pg.254]

Determination of the homogeneity of polymer blends. The surface of a product can be mapped and occurrence of the events which are characteristic of individual polymers can be obtained. The relative intensity of these will indicate whether some areas of the sample are richer in one polymer than the others. For example in a gasket, which is a blend of polyisobutylene rubber (PIB) and LDPE, the Tg of the PIB (TMA trace) and the TJn (DSC trace) of the LDPE will be focused on. [Pg.246]

See other pages where Polyisobutylene rubbers is mentioned: [Pg.286]    [Pg.273]    [Pg.275]    [Pg.131]    [Pg.360]    [Pg.598]    [Pg.323]   
See also in sourсe #XX -- [ Pg.10 , Pg.60 ]

See also in sourсe #XX -- [ Pg.10 , Pg.60 ]

See also in sourсe #XX -- [ Pg.598 ]

See also in sourсe #XX -- [ Pg.66 ]

See also in sourсe #XX -- [ Pg.166 , Pg.254 ]



SEARCH



Polyisobutylene

Polyisobutylenes

Pressure-sensitive polyisobutylene, butyl rubber

© 2024 chempedia.info