Polyimide rheological properties

An approach for improved processing of PMR polyimide is the addition of jV-phenylnadimide to the precursor solution of the monomeric reactants. After the in-situ condensation, a PMR-15 resin is obtained which is diluted with JV-phenylnadimide in order to improve the rheological properties of the system (118). The amount of JV-phenylnadimide (PN) added was in the range of 4 to 20 mol %. Just 4 mol % caused a significant and disproportionate reduction of the minimum viscosity with no concomitant loss of thermal stability. 

In this article, the synthesis, characterization, rheology, solution processing, and mechanical properties of novel molecular composites are discussed. These molecular composite are block copolymers composed of a liquid-crystalline polyamide and two amorphous polyimides. Also, the rheological properties of both isotorpic and anisotropic solutions of PBTA homopolymers and PBTA/PI block copolymers are... 

This technique has found the following applications in addition to those discussed in Sections 10.1 (resin cure studies on phenol urethane compositions) [65], 12.2 (photopolymer studies [66-68]), and 13.3 (phase transitions in PE) [66], Chapter 15 (viscoelastic and rheological properties), and Section 16.4 (heat deflection temperatures) epoxy resin-amine system [67], cured acrylate-terminated unsaturated copolymers [68], PE and PP foam [69], ethylene-propylene-diene terpolymers [70], natural rubbers [71, 72], polyester-based clear coat resins [73], polyvinyl esters and unsaturated polyester resins [74], polyimide-clay nanocomposites [75], polyether sulfone-styrene-acrylonitrile, PS-polymethyl methacrylate (PMMA) blends and PS-polytetrafluoroethylene PMMA copolymers [76], cyanate ester resin-carbon fibre composites [77], polycyanate epoxy resins [78], and styrenic copolymers [79]. 

Cosutchi AI, Nica S-L, Hulubei C, Homocianu M, loan S. Effects of the aliphatic/aromatic stmcture on the miscibility, thermal, optical and rheological properties of some polyimide blends. Polym. Eng. Sd. 2012 52(7) 1429-1439. 

TMA has also been used in rheological studies carried out on nadimide resin [59], crosslinkable aromatic polyimides [60], and various PA [61]. Other measurements that can be carried out by TMA are discussed in Sections 13.2 (phase transition studies), 16.2.1 and 16.4.1 (thermal properties), and 18.1 (mechanical properties). 

---