Polyarylene ether ketone/sulfone

Of all the hydrocarbon-based PEMs, this group most likely has the largest variety of different systems. This is probably due to the wealth of prior knowledge of the nonsulfonated analogues that have been developed over the last several decades as well as the general expectation of higher thermal stability, better mechanical properties, and increased oxidative stability over polystyrene-based systems. Within the context of this section, polyarylenes are systems in which an aryl or heteroaryl ring is part of the main chain of the polymer. This section will, therefore, include polymers such as sulfonated poly (ether ether ketone) and sulfonated poly(imides) but will not include systems such as sulfonated polystyrene, which will be covered in Section 3.3.I.3. 

Sulfonation is very useful chemical modification of polymer, as it induces high polarity in the polymer changing its chemical as well as physical properties. Sulfonated polymers are also important precursors for ionomer formation [75]. There are reports of sulfonation of ethylene-propylene diene terpolymer (EPDM) [76, 77], polyarylene-ether-sulfone [78], polyaromatic ether ketone [79], polyether ether ketone (PEEK) [80], styrene-ethylene-butylene-styrene block copolymer, (SEBS) [81]. Poly [bis(3-methyl phenoxy) phosphozene] [82], Sulfonated polymers show a distinct peak at 1176 cm"1 due to stretching vibration of 0=S=0 in the -S03H group. Another peak appears at 881 cm 1 due to stretching vibration of S-OH bond. However, the position of different vibrational bands due to sulfonation depends on the nature of the cations as well as types of solvents [75, 76]. 

Polyarylenes, in particular different types of poly(arylene ether ketone)s, have been the focus of much hydrocarbon membrane research in recent years. - - With good chemical and mechanical stability under PEM fuel cell operating conditions, the wholly aromatic polymers are considered to be the most promising candidates for high-performance PEM fuel cell applications. Many different types of these polymers are readily available and with good process capability. Some of these membranes are commercially available, such as poly(arylene sulfone)s and poly(arylene... 

---