Poly , tacticity

Figure 7.10 Nuclear magnetic resonance spectra of three poly(methyl methacrylate samples. Curves are labeled according to the preominant tacticity of samples. [From D. W. McCall and W. P. Slichter, in Newer Methods of Polymer Characterization, B. Ke (Ed.), Interscience, New York, 1964, used with permission.]...

Microstructure. Interest in PVP microstmcture and the potential for tacticity has been reviewed (39,40). PVP generated by free radicals has been shown to be atactic except when polymerization is conducted in water. In this case some syndiotacticity is observed (40). In the presence of syndiotactic templates of poly(methacryhc acid) (or poly(MAA)), VP will apparentiy polymerize with syndiotactic microstmcture, although proof is lacking (41—45). The reverse, polymerization of MAA in the presence of PVP, affords, as expected, atactic poly(MAA) (46,47). 

In this stage of the investigation, poly(methyl methacrylates) (PMMAs) were selected as the polymeric probes of intermediate polarity. Polymers of medium broad molar mass distribution and of low tacticity (14) were a gift of Dr. W. Wunderlich of Rohm Co., Darmstadt, Germany. Their molar masses ranged from 1.6 X 10" to 6.13 X 10 g-mol. For some comparative tests, narrow polystyrene standards from Pressure Co. (Pittsburgh, PA) were used. 

Table 8.2 Effect of Solvent on Tacticity of Poly(alkyl methacrylate) at -40 °C94...

Table 8.3 Effect of Amines on Tacticity of Poly(methacrylic acid) at 60 DC90...

The program will be demonstrated with poly(vinyl alcohol) for tacticity analysis and with copolymer vinylidene chloride isobutylene for monomer sequence analysis. Peak assignments in C-13 spectra were obtained independently by two-dimensional NMR techniques. In some cases, assignments have been extended to longer sequences and confirmed via simulation of the experimental data. Experimental and "best-fit" simulated spectra will be compared. 

Nuclear magnetic resonance has proved to be a valuable tool in determination of configurational sequences in poly(MMA) (14). In Figure 3 is shown the NMR of poly(MMA) synthesized with an anionic polymerization catalyst known to produce predominantly isotactic sequences. In these polymers, the NMR spectrum of the methylene units In the polymer backbone gives an unequivocal determination of tacticity. The methylene signal, occurring about 1.8... 

Table II. Composition and Tacticity Ratios Taken from 3C NMR Spectra of Poly(MMA/MAA) a...

Iso tactic poly(methyl methacrylate) (it-PMMA) can form a stereocomplex with st-PMMA. Recent X-ray studies 179) of this material indicate that the two polymer chains probably interact to form a double helical structure. The it-PMMA chain forms the inner helix and is surrounded by the st-PMMA helical chain which winds around it. If subsequent work confirms this model, this material would constitute a most unusual inclusion compound involving only one monomeric substance. 

Polymers that incorporate steric centers into their backbones can display various types of tacticity. The three principal types of tacticity are isotactic, syndiotactic, and atactic, as illustrated in Fig. 1.8 for polypropylene. Other polymers that display tacticity include polystyrene and poly a-olefins,... 

Figure 14 Tacticity of (A) polypropylene and (B) poly(methyl-phenyl) silane.

The tacticity or distribution of asymmetric units in a polymer chain can be directly determined using NMR spectroscopy and infrared (IR) spectroscopy and has been studied for a variety of polymers. Figure 5(a) and 5(b) show the proton NMR spectra [26,27] and IR spectra [28,29], respectively, for the two stereoisomers of poly(methyl methacrylate) (PMMA), syndiotactic and isotactic PMMA. These two structures in a polymer like PMMA give rise to different signatures in both the techniques. In the case of the NMR spectra [26,27], the... 

To clarify the tacticity problem, trans-l,4-hexadiene and 5-methyl-l,4-hexadiene polymers were examined by X-ray diffraction. Fiber diagrams were obtained from samples stretched to four times their original lengths. Eight reflections from the poly(trans-1,4-hexadiene) fiber pattern may be interpreted on the0basis of a pseudo-orthorhombic unit cell with a = 20.81 + 0.05 A b =... 

Further confirmation of the structure and tacticity of poly/5-methyl-l,4-hexadiene)was obtained from X-ray diffraction and u-NMR data of its hydrogenated polymer (Scheme 2). The hydrogenated polymer sample showed a highly crystalline pattern (Figure 7), with diffraction spots that were well defined. This pattern was identical to that of isotactic poly(5-methyl-l-hexene) as reported in the literature (26) (measured identity period, 6.2 A lit., 6.33 A). 

The algorithm also incorporates tacticity control for vinyl chains. The random number generator is used to choose between d- and l-versions of the transformation matrix. A single parameter controls the relative probability of d- and l-residues. The poly(p-fluorostyrene) results presented here are for atactic (stereochemically irregular) chains. 

Stereoselective ROMP has been reported with monomer (213). Initiator (211) affords highly stereoregular polymer with >98% trans C=C bonds in the polymer backbone.534 However, when (210) is used, >98% cis-poly-(213) is obtained.535 A similar situation occurs for the diester monomer (214). Furthermore, a rapidly equilibrating mixture of (210) and (211) can be used to allow intermediate cis/trans contents to be manipulated by the stoichiometry of the initiator mixture. 13C NMR536 and dielectric analyses537 suggested that trans-poly-(213) is highly syndio-tactic (92% r dyad content). The ROMP of other fluorinated olefins has been recently reviewed.538... 

A third factor influencing the value of Tg is backbone symmetry, which affects the shape of the potential wells for bond rotations. This effect is illustrated by the pairs of polymers polypropylene (Tg=10 C) and polyisobutylene (Tg = -70 C), and poly(vinyi chloride) (Tg=87 C) and poly(vinylidene chloride) (Tg =- 19°C). The symmetrical polymers have lower glass transition temperatures than the unsymmetrical polymers despite the extra side group, although polystyrene (100 C) and poly(a-meth-ylstyrene) are illustrative exceptions. However, tacticity plays a very important role (54) in unsymmetrical polymers. Thus syndiotactic and isoitactic poly( methyl methacrylate) have Tg values of 115 and 45 C respectively. 

In figure 1 we present the experimental and calculated mK values of the copolymer poly(styrene-co-p-bromostyrene). From this study (3) we were able to show unequivocally that the tacticity of this polystyrene sample is pr — 0.55, where pr is the probability of racemic dyad replication. 

The configurational average in eqn (10) can also be performed (8) with eqn (1). In table III we present the results of our calculations (8) of eqn (10) for poly(p-nitrostyrene) versus the tacticity of the polymer. No experimental EFSHG results have been reported for... 

Calculated for poly(p-nitrostyrene) at 25 "C versus tacticity Pr x - 200 repeat units... 

Poly(styrene)-poly(acrylate) colloidal suspensions, 7 275 Polystyrene/polyfmethyl methacrylate) commercial block copolymers, 7 648t Polystyrenes. See also Polystyrene (PS) commercial, 23 364 general-purpose, 23 364 specialty, 23 364-366 stabilized, 23 366 tactic, 23 365... 

---