Poly glycidyl methacrylate-co-ethylene

Fig. 3. Effect of dodecanol in the porogenic solvent on the differential pore size distribution of molded poly(glycidyl methacrylate-co-ethylene dimethacrylate) monoliths (Reprinted with permission from [62]. Copyright 1996 American Chemical Society). Conditions polymerization time 24 h, temperature 70 °C, polymerization mixture glycidyl methacrylate 24%, ethylene dimethacrylate 16%, cyclohexanol and dodecanol contents in mixtures 60/0 (curve 1), 57/3 (curve 2), 54/6 (curve 3), and 45/15 vol.% (4)...

Fig. 6. Reaction of poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith with diethylamine...

Fig. 8. Effect of linear flow velocity of an L-benzoyl arginine ethylester solution (0.2 mol/1) on the enzymatic activity of trypsin immobilized on poly(glycidyl methacrylate-co-ethylene dimethacrylate) beads (curve 1) and monolith (curve 2) (Reprinted with permission from [90]. Copyright 1996 Wiley-VCH). Reactor 50 mm x 8 mm i.d., temperature 25 °C...

Viklund C, Svec F, Frechet JMJ, and Irgum K. Fast ion-exchange HPLC of proteins using porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) monoliths grafted with poly(2-acrylamido-2-methyl-l-propanesulfonic acid). Biotechnol. Prog. 1997 13 597. 

Svec F, Frechet J M (1995). Modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) continuous rod columns for preparative-scale ion-exchange chromatography of proteins. J. Chromatogr. A. 702(l-2) 89-95. 

Petro, M., Svec, R, and Frechet, J. M. J., Immobilization of trypsin onto molded macroporous poly(glycidyl methacrylate-co-ethylene dimethcrylate) rods and use of the conjugates as bioreactors. Biotech. Bioeng., 49, 355, 1996. 

For the separation of peptides and proteins followed by MALDl-TOF-MS detection, porous polymer monoliths were prepared by UV-initiated photografting of the respective monomer solutions. Plates were produced as 50- to 200-pm thin poly(butyl methacrylate-co-ethylene dimethacrylate) layers and as 50-pm thin poly(glycidyl methacrylate-co-ethylene dimethacrylate) layers with a gradient of hydrophobic-ity for 2D separations [13,14]. Thermally initiated polymerization was used for the production of 50-pm thin poly(4-methylstyrene-co-chloromethylstyrene-co-divinylbenzene) layers. The specific surface area of this styrene-containing polymer was further increased by hypercrosslinking via Friedel-Crafts alkylation, resulting in a higher separation performance [15]. 

Co-casting with tropocollagen followed by glutaraldehyde crosslinking Reaction with poly[(glycidyl methacrylate)-co-(ethylene dimethacrylate)] carrier or its amine derivatives... 

Miletid, N., R. Rohandi, Z. Vukovic, A. Nastasovic, and K. Loos. 2009. Surface Modification of Macroporous Poly(Glycidyl Methacrylate-Co-Ethylene Glycol Dimethacrylate) Resins for Improved Candida Antarctica Lipase B Immobilization. Reactive and Functional Polymers 69 (l) 68-75. 

---