Platinum, catalyst hydrogenation

Chiral-Modified Platinum Hydrogenation Catalysts and Related Systems.510... 

Use of a catalyst that is in a separate phase from the reactants. For example, a platinum hydrogenation catalyst is a solid, a separate phase from the liquid alkene. (p. 356)... 

Fig. 13. Effective and true poisoning graphs for a platinum hydrogenation catalyst (0.05 g. Pt) poisoned by cyanide ions.

The geometrical effect of poisons. This poisoning effect relates to the molecular size and geometrical structure of the poison. Similarly, take sulfides as an example, their poisoning effect on nickel or platinum hydrogenation catalysts have the following trends ... 

Adams catalyst, platinum oxide, Pt02 H20. Produced by fusion of H2PtCl6 with sodium nitrate at 500-550 C and leaching of the cooled melt with water. Stable in air, activated by hydrogen. Used as a hydrogenation catalyst for converting alkenes to alkanes at low pressure and temperature. Often used on Si02... 

Use 01 g. of the platinum oxide catalyst and 11 4 g, of pure cinnamic acid dissolved in 100 ml. of absolute alcohol. The theoretical volume of hydrogen is absorbed after 7-8 hours. Filter off the platinum, and evaporate the filtrate on a water bath. The resulting oil solidifies on cooling to a colourless acid, m.p. 47-48° (11-2 g.). Upon recrystallisation from light petroleum, b.p. 60-80°, pure dihydrocinnamic acid, m.p. 48-49°, is obtained. 

Place a solution of 10 -4 g. of benzalacetophenone, m.p. 57° (Section IV,130) in 75 ml. of pure ethyl acetate (Section 11,47,15) in the reaction bottle of the catalytic hydrogenation apparatus and add 0 2 g. of Adams platinum oxide catalyst (for full experimental details, see Section 111,150). Displace the air with hydrogen, and shake the mixture with hydrogen until 0 05 mol is absorbed (10-25 minutes). Filter oflF the platinum, and remove the ethyl acetate by distillation. RecrystaUise the residual benzylacetophenone from about 12 ml. of alcohol. The yield of pure product, m.p. 73°, is 9 g. 

Hydrocinnamic acid may also be prepared by the reduction of cinnamic acid with sodium and alcohol or with sodium amalgam or with hydrogen in the presence of Adams platinum oxide catalyst (Section 111,150) ... 

The uncatalyzed addition of hydrogen to an alkene although exothermic is very slow The rate of hydrogenation increases dramatically however m the presence of cer tain finely divided metal catalysts Platinum is the hydrogenation catalyst most often used although palladium nickel and rhodium are also effective Metal catalyzed addi tion of hydrogen is normally rapid at room temperature and the alkane is produced m high yield usually as the only product... 

Hydrogenation Catalysts. The key to catalytic hydrogenation is the catalyst, which promotes a reaction which otherwise would occur too slowly to be useful. Catalysts for the hydrogenation of nitro compounds and nitriles are generally based on one or more of the group VIII metals. The metals most commonly used are cobalt, nickel, palladium, platinum, rhodium, and mthenium, but others, including copper (16), iron (17), and tellurium... 

Allyl Complexes. Allyl complexes of thorium have been known since the 1960s and are usually stabilized by cyclopentadienyl ligands. AEyl complexes can be accessed via the interaction of a thorium haUde and an aHyl grignard. This synthetic method was utilized to obtain a rare example of a naked aHyl complex, Th(Tj -C2H )4 [144564-74-9] which decomposes at 0°C. This complex, when supported on dehydroxylated y-alumina, is an outstanding heterogeneous catalyst for arene hydrogenation and rivals the most active platinum metal catalysts in activity (17,18). 

Salts of neodecanoic acid have been used in the preparation of supported catalysts, such as silver neodecanoate for the preparation of ethylene oxide catalysts (119), and the nickel soap in the preparation of a hydrogenation catalyst (120). Metal neodecanoates, such as magnesium, lead, calcium, and zinc, are used to improve the adherence of plasticized poly(vinyl butyral) sheet to safety glass in car windshields (121). Platinum complexes using neodecanoic acid have been studied for antitumor activity (122). Neodecanoic acid and its esters are used in cosmetics as emoUients, emulsifiers, and solubilizers (77,123,124). Zinc or copper salts of neoacids are used as preservatives for wood (125). 

Hydrogenation. Hydrogenation is one of the oldest and most widely used appHcations for supported catalysts, and much has been written in this field (55—57). Metals useflil in hydrogenation include cobalt, copper, nickel, palladium, platinum, rhenium, rhodium, mthenium, and silver, and there are numerous catalysts available for various specific appHcations. Most hydrogenation catalysts rely on extremely fine dispersions of the active metal on activated carbon, alumina, siHca-alumina, 2eoHtes, kieselguhr, or inert salts, such as barium sulfate. 

Dan and Henbesi (ii) demonslraied ihai ihe amount of salts remaining in platinum oxide catalysts had an important bearing on the hydrogenation-hydrogenolysis ratio of allylic functions. Hydrogenolysis is inhibited by salts remaining from the catalyst preparation or by salts such as sodium nitrite, cyanide, or hydroxide added later. 

---