Physical data, tables

Certain of the physical data (Table III) appear to be less than satisfactory. In general, agreement between the two types of porosity measurements is not good and the values for DC3-3600, UE15-7 and UE15-7a appear excessively large. The densities of the quartz monzonite appear unusually low, i.e., values in the range 2.6 to 2.7 were expected... 

D. Young, E. Corey, Optimization of physical data tables by simulated annealing. Computers in Pyhsics, 3 (1989) 33. 

Ill Structure of Arenium Ions According to Physical Data Table 7. PMR Data of Methyl-substituted 1-Naphthalenium Ions... 

Propylene oxide is a colorless, low hoiling (34.2°C) liquid. Table 1 lists general physical properties Table 2 provides equations for temperature variation on some thermodynamic functions. Vapor—liquid equilibrium data for binary mixtures of propylene oxide and other chemicals of commercial importance ate available. References for binary mixtures include 1,2-propanediol (14), water (7,8,15), 1,2-dichloropropane [78-87-5] (16), 2-propanol [67-63-0] (17), 2-methyl-2-pentene [625-27-4] (18), methyl formate [107-31-3] (19), acetaldehyde [75-07-0] (17), methanol [67-56-1] (20), ptopanal [123-38-6] (16), 1-phenylethanol [60-12-8] (21), and / /f-butanol [75-65-0] (22,23). 

Physical Properties. Both (1) and (2) are weak bases, showing 4.94 and 5.40, respectively. Their facile formation of crystalline salts with either inorganic or organic acids and complexes with Lewis acids is in each case of considerable interest. Selected physical data for quinoline and isoquinoline are given in Table 1. Reference 4 greatly expands the range of data treated and adds to them substantially. 

Selected physical data for various quiaones are given ia Table 2 Table 3 gives uv spectral data and redox potentials (Fig. 2). References 19 and 20 greatiy expand the range of data treated. 

R. A. Matula,/. PIjs. Chem. Ref. Data 8, 4 (1979). American Institute of Physics resistivity tables. 

Table 2 Physical Data for Aminopteridines and Ring and Af-Methylated Derivatives...

Table 5 Physical Data for 8-Substituted Lumazines and Pterins...

The parent 1-azetine is a colourless liquid, stable at -70 °C, which undergoes polymerization within a few seconds at 20 °C (81JA468). Substituted 1-azetines possess greater stability, and physical data for representative derivatives of 1-azetine are shown in Table 6. 

PHYSICAL AND CHEMICAL DATA TABLE 2-8 Vapor Pressures of Organic Compounds/ up to 1 atm Continued)... 

PHYSICAL AND CHEMICAL DATA TABLE 2-309 Specific Heat at Constant Pressure, Thermal Conductivity, Viscosity, and Prandtl Number of R32 Gas... 

The physical data index summarizes the quantitative data given for specific compounds in the text, tables and figures in Volumes 1-7. It does not give any actual data but includes references both to the appropriate text page and to the original literature. The structural and spectroscopic methods covered include UV, IR, Raman, microwave, MS, PES, NMR, ORD, CD, X-ray, neutron and electron diffraction, together with such quantities as dipole moment, pX a, rate constant and activation energy, and equilibrium constant. 

Table 4 allows a generic identification of the various technology options suitable for treating wastes based on their hazardous characteristics and physical form Table 4 also identifies the kinds of data which must be collected to perform a valid evaluation of those technologies. The physical treatment data needs for different media shown in Table 5 are typically required in addition to those presented in Table 4. 

When the reaction conditions approach the thermodynamic equilibrium, isomerization follows. The distribution of the double bond is statistical. The molecular formation in the disproportionation stage is also statistical. Normally a run will produce 10-15% by weight of product, which is then suitable for LAB synthesis after distillation. The physical data of these internal olefins are shown in Table 4 [41]. 

Recently reported physical data for quinoxaline and its salts etc are collected under quinoxaline in the Appendix (Table of Simple Quinoxalines), at the end of this book. More notable studies on the properties of quinoxaline or reduced quinoxaline are briefly indicated here with references. 

Some analytical instruments produce a table of raw data which need to be processed into the analytical result. Hyphenated measurement devices, such as HPLC linked to a diode array detector (DAD), form an important class of such instruments. In the particular case of HPLC-DAD, data tables are obtained consisting of spectra measured at several elution times. The rows represent the spectra and the columns are chromatograms detected at a particular wavelength. Consequently, rows and columns of the data table have a physical meaning. Because the data table X can be considered to be a product of a matrix C containing the concentration profiles and a matrix S containing the pure (but often unknown) spectra, we call such a table bilinear. The order of the rows in this data table corresponds to the order of the elution of the compounds from the analytical column. Each row corresponds to a particular elution time. Such bilinear data tables are therefore called ordered data tables. Trilinear data tables are obtained from LC-detectors which produce a matrix of data at any instance during the... 

Table 2 Chemical and physical data for commercially important triazine compound (from Refs. 3-5)...

---