Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Phosphines alkenylation

Butenoic acid and 4-pentenoic acid (42) react with alkenyl halides or tri-flates to afford 7-alkenyl-7-lactones and the ( -alkenyl-5-valerolactone 44 via the TT-allylpalladium intermediate 43 formed by the elimination of Pd—H and its readdition in opposite regiochemistry using a phosphine-free Pd cata-lyst[43]. [Pg.134]

Organophosphorus compounds. Phosphorus-carbon bond fonnation takes place by the reaction of various phosphorus compounds containing a P—H bond with halides or tritlates. Alkylaryl- or alkenylalkylphosphinates are prepared from alkylphosphinate[638]. The optically active isopropyl alkenyl-methylphosphinate 778 is prepared from isopropyl methylphosphinate with retention[639]. The monoaryl and symmetrical and asymmetric diarylphosphi-nates 780, 781, and 782 are prepared by the reaction of the unstable methyl phosphinate 779 with different amounts of aryl iodides. Tnmethyl orthoformate is added to stabilize the methyl phosphinate[640]. [Pg.243]

The mixed triarylphosphine 787 can be prepared by the reaction of (trimethylsily )dipheny phosphine (786) with aryl halides[647]. Ph3P is converted into the alkenylphosphonium salt 788 by the reaction of alkenyl tri-flates[648]. [Pg.244]

Asymmetric versions of the cyclopropanation reaction of electron-deficient olefins using chirally modified Fischer carbene complexes, prepared by exchange of CO ligands with chiral bisphosphites [21a] or phosphines [21b], have been tested. However, the asymmetric inductions are rather modest [21a] or not quantified (only the observation that the cyclopropane is optically active is reported) [21b]. Much better facial selectivities are reached in the cyclopropanation of enantiopure alkenyl oxazolines with aryl- or alkyl-substituted alkoxy-carbene complexes of chromium [22] (Scheme 5). [Pg.65]

The metal catalysed hydroboration and diboration of alkenes and alkynes (addition of H-B and B-B bonds, respectively) gives rise to alkyl- or alkenyl-boronate or diboronate esters, which are important intermediates for further catalytic transformations, or can be converted to useful organic compounds by established stoichiometric methodologies. The iyn-diboration of alkynes catalysed by Pt phosphine complexes is well-established [58]. However, in alkene diborations, challenging problems of chemo- and stereo-selectivity control stiU need to be solved, with the most successful current systems being based on Pt, Rh and An complexes [59-61]. There have been some recent advances in the area by using NHC complexes of Ir, Pd, Pt, Cu, Ag and Au as catalysts under mild conditions, which present important advantages in terms of activity and selectivity over the established catalysts. [Pg.38]

Chloroacylation of terminal aryl, alkyl or alkenyl alkynes [Le. the addition of RC(=0)-C1 across the CC triple bond] with aromatic acyl chlorides was catalysed by [IrCl(cod)(lPr)] (5 mol%) in good conversions (70-94%) in toluene (90°C, 20 h). Z-addition products were observed only, hitemal alkynes were umeactive. Surprisingly, a phosphine/[lr(p-Cl)(l,5-cod)]2 system under the same conditions provides decarbonylation products (Scheme 2.34) [117]. [Pg.57]

Nickel(II) salts are able to catalyze the coupling of Grignard reagents with alkenyl and aryl halides. A soluble 6 -phosphine complex, Ni(dppe)2Cl2, is a particularly effective catalyst.266 The main distinction between this reaction and Pd-catalyzed cross... [Pg.756]

Treatment of [IrCl(CO)2(/ -toluidene)] with azine phosphines of type Z, -PPh2CH2C( Bu) =N-N=C(Q)R, Q = H, Me, R = an organic group, activates aryl, heterocyclic, alkenyl, or aliphatic C—H bonds to give cyclometalated Ir111 hydrides.339... [Pg.186]

The structure of the styryl derivative Os ( ,)-CH=CHPh Cl(CO)(PIPr3)2 has been determined by X-ray diffraction analysis.33 In agreement with OsHCl(CO) (P Pr3)2, the coordination polyhedron around the osmium atom can be rationalized as square-pyramidal with the phosphines, mutually tram disposed, the chloride and the carbonyl group occupying the basal sites, and the alkenyl located at the... [Pg.8]

Intramolecular hydrosilylation of the fe-alkenyl silane yields the chiral spirosilane with high diastereoselectivity (Scheme 30). With 0.3-0.5 mol.% of catalyst consisting of [Rh(hexadiene)Cl]2 and a range of chelating phosphines P-P (P-P = (R)-BINAP (6), (R,R)-DIOP (5)), a maximum chemical yield of spirosilane of 82% was found with 83% enantiomeric excess. These values were improved considerably by the use of the new ligand... [Pg.286]

Aryl-alkenyl cross-coupling is straightforward. Simple alkylmagnesium reagents (Me, Et, CH2SiMe3, etc.) can be easily involved in Ni-catalyzed cross-coupling (27),139,140 while more complex alkyl halides—particularly branched ones prone to /3-hydride elimination—require Pd catalysts with bidentate phosphines, such as dppf, to achieve good selectivity (Section 9.6.3.4.7). [Pg.316]

The (alkenyl-ethynyl)gold(i) complexes shown in Scheme 13 were prepared with mono- and ditertiary phosphine ligands and used as substrates for the coordination of coinage metal cations. The products are strongly luminescent.60... [Pg.260]

Hydrogenation of 1,3-dienes to terminal olefins is catalyzed by HRh(PPh3)4 and [Rh(CO)2(PPh3)2]2 in the presence of excess phosphine diene insertion into a metal- hydride bond to give a-alkenyl rather than 7r-allyl intermediates was postulated for the initial step (141). Mechanistic studies of the HRh(PPh3)4 catalyst (142) and a more reactive phosphole analog (143) HRh(DBP)4 [5-phenyl-5//-dibenzophosphole (DBP), 7] for... [Pg.330]

Acylbenzotriazoles 162 are efficient C-acylation reagents for the regioselective conversion of ketone enolates into P-diketones . Diethyl(l-benzotriazolmethyl)phosphinate (163) was found to be a convenient reagent for the stereoselective preparation of (E)-l-(l-alkenyl)benzotriazoles <00SC1413>. The novel three-carbon synthon 1-(1//-133-... [Pg.180]

In addition, aryl triflates have proven to be viable substrates for the Pd-catalyzed Csp2—P bond formation reactions [87-90], Intriguingly, phosphorylation can be achieved from the Pd-catalyzed coupling of alkenyl triflate with not only dialkylphosphites, but also with hypophosphorous acid [88]. Thus, phosphinic acid 87 was obtained when triflate 86 was treated with hypophosphorus acid in the presence of Pd(Ph3P)4. Due to the abundance of alkenyl triflates and milder reaction conditions, alkenyl triflates have certain advantages over the corresponding alkenyl halides as substrates for Pd-catalyzed phosphorylations to make alkenyl phosphonates or phosphinates. [Pg.20]

Intramolecular Heck reactions.6 Heck intramolecular coupling of alkenyl or aryl iodides substituted by 3-cycloalkenyl group is an attractive route to fused, spiro, and bridged polycyclic products. Coupling is achieved with a Pd-phosphine catalyst such as Pd[P(QH5),]4 in combination with a base, N(C2H5)3 or NaOAc. The coupling tends to produce a mixture of two isomeric alkenes, in which the newly formed bond is allylic or homoallylic to the ring juncture. [Pg.297]

The intermediate product 162, formed from the nudeophilic addition of 1,2-alle-nic phosphonate or 1,2-allenic phosphine oxide with allylic alcohol, would also undergo a Claisen rearrangement to form 2-oxo-5-alkenyl phosphonate or phosphine oxide 163 [85], The rearrangement is accelerated by the carbanionic nature of the intermediate 162. For the conjugate addition step, the reaction temperature is crucial since the reaction at 0 °C afforded mainly /i,y-unsaturated product whereas a,/8-unsaturated products were formed at 20 °C. [Pg.624]

Shibasaki et al. developed a polymer-supported bifunctional catalyst (33) in which aluminum was complexed to a chiral binaphtyl derivative containing also two Lewis basic phosphine oxide-functionahties. The binaphtyl unit was attached via a non-coordinating alkenyl Hnker to the Janda Jel-polymer, a polystyrene resin containing flexible tetrahydrofuran-derived cross-Hnkers and showing better swelling properties than Merifield resins (Scheme 4.19) [105]. Catalyst (33) was employed in the enantioselective Strecker-type synthesis of imines with TMSCN. [Pg.221]

Regiospeciflc, uncatalysed hydrophosphination of typical Michael acceptors, such as methyl acrylate, has been reported to proceed readily with alkenyl- an alkynyl-phosphine oxides, e.g. R(l )P(H)0. Good stereoselectivity was observed when a chiral electrophile was used. The reaction is believed to proceed owing to the strong... [Pg.438]

The H-P bond in hypophosphites appears much more reactive than that in the phosphinate products the reactions of alkynes do not form symmetrically dialkenyl-substituted phosphinate R2P(0)(0R ) (R=alkenyl group). [Pg.53]

Phosphines, as nucleophiles, add to many unsaturated substrates giving metal-lated ylides. Scheme 17 collects some representative examples of the addition of phosphines to carbyne complexes, giving (57) [132], to allenylidenes (58) [133], a-alkenyls (59) [134], or a-alkynyls (60) [135]. Moreover, reaction of phosphines with 7i-alkenes [136] and 71-aIkynes (61)-(64) [137-140] have also been reported. It is not possible to explain in depth each reaction, but the variety of resulting products provides an adequate perspective about the synthetic possibihties of this type of reactions. [Pg.29]

While the reductive elimination is a major pathway for the deactivation of catalytically active NHC complexes [127, 128], it can also be utilized for selective transformations. Cavell et al. [135] described an interesting combination of oxidative addition and reductive elimination for the preparation of C2-alkylated imida-zohum salts. The in situ generated nickel catalyst [Ni(PPh3)2] oxidatively added the C2-H bond of an imidazolium salt to form a Ni hydrido complex. This complex reacts under alkene insertion into the Ni-H bond followed by reductive elimination of the 2-alkylimidazolium salt 39 (Fig. 14). Treatment of N-alkenyl functionalized azolium salts with [NiL2] (L = carbene or phosphine) resulted in the formation of five- and six-membered ring-fused azolium (type 40) and thiazolium salts [136, 137]. [Pg.110]


See other pages where Phosphines alkenylation is mentioned: [Pg.142]    [Pg.168]    [Pg.215]    [Pg.567]    [Pg.485]    [Pg.40]    [Pg.41]    [Pg.1029]    [Pg.59]    [Pg.362]    [Pg.723]    [Pg.731]    [Pg.103]    [Pg.185]    [Pg.187]    [Pg.136]    [Pg.99]    [Pg.309]    [Pg.311]    [Pg.333]    [Pg.256]    [Pg.348]    [Pg.681]    [Pg.209]    [Pg.96]    [Pg.6]    [Pg.29]   
See also in sourсe #XX -- [ Pg.73 , Pg.74 ]




SEARCH



© 2024 chempedia.info