Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

3-party port

A 2-party port, which is mainly used in 2-party transactions, such as authentication. [Pg.104]

A 3-party port, which is used in addition to the 2-party port in 3-party transactions. [Pg.104]

Parts of this mapping are also defined once and for all. In particular, for each correct pair ( authentication , (id, idj ), the switch connects the 2-party ports of those two entities with a point-to-point channel, d similarly, it has a fixed scheme for connecting 2- and 3-party ports of entities in disputes. [Pg.104]

Here the structural property that authentication is a 2-party transaction is used, i.e., that effectiveness of authentication holds if the entities of the signer and the recipient are connected at their 2-party ports and no other connection is made. If all entities took part, the argument would not be valid, because some messages of the real signer would be guaranteed to reach the recipient, because channels were assumed to be secure against denial of service. [Pg.123]

A and B are probabilistic polynomial-time interactive algorithms with two input and output ports each one pair is called 2-party ports and the other... [Pg.157]

The execution of the complete protocol Gen is defined by an execution of A, B, and res, combined as in Figure 7.1 The 2-party ports of A and B are connected with a point-to-point channel and the broadcast ports with broadcast channels, which also lead to the input ports of res. Hence Gen defines probabilistic assignments of the form... [Pg.158]

As with packaging, the exact form of component composition varies across different component technologies and tools. The key point is that the composition can be done by a different party, and at a different time, from the building of the components themselves. Section 10.7, Component Architecture, discusses a component-port-connector model for describing compositions in a simple way. Ports are the access points in a component where its services can be accessed or where it can access another s services connectors couple ports. The kinds of compositions supported by a particular technology or style can be described by its connector kinds. [Pg.412]

A connector is implemented as the registration of the receiver s input with the sender s output. When a connection is to be made, the sender must be informed that the required output is to be sent to the required input of the required receiver. This explains what an output port is It represents an object s ability to accept registration requests and to maintain a list (a separate one for each of its output ports) of the interested parties. An input port represents an object s ability to accept the messages sent by the corresponding output ports. [Pg.438]

CPUSA, Race Hatred on Trial [1931], p. 4, collected in Bernard Johnpoll, ed., A Documentary History of the Communist Party of the United States (West-port Greenwood, 1994), vol. II, pp. 393-440 Haywood, Black Bolshevik, pp. 349-358 Naison, Communists in Harlem, pp. 47-49. [Pg.342]

The Backscatter identification is quite straightforward. Indeed, backscatter packets are responses to connections requests issued by spoofed IP addresses, typically in the case of a Denial of Service attack against a third party. If our addresses are used (spoofed) in the course of this attack, we will see the responses of the victim sent to us without us having talked to him first. These attacks have been very well-analyzed by Moore et al. in [43], [44], Figure 9 summarizes the various types of responses (column response from victim ) that can be sent against our honeypots. These packets hit a large variety of ports that are traditionally unused, such as 27374 (TCP RST), 11224 (TCP SYN ACK), 9026 (RST ACK), etc. [Pg.253]

CRI has close collaborations with most third-party software vendors and research software development groups. These collaborative efforts tune and codevelop applications for CRI products. The complete list of chemistry applications available on the Y-MP and C90 vector supercomputers is nearly everything. CRI has entered the MPP arena, and efforts there are progressing. Again, if past performance in the computational chemistry application area is any indication, we can expect CRI to expand the number of MPP chemistry applications. The hardware characteristics of the T3D and the software development environment provided by UNICOS will facilitate the expansion of computational chemistry applications by the company s experienced staff. CRI has also partnered with several supercomputer centers on a collaborative basis to port and optimize key applications for the T3D. [Pg.299]

Each bus type has a set of lines that are used to allow the CPU to send instructions to the devices installed in the bus s slots. Each device is given its own unique communication line to the CPU. These lines are called input/output (I/O) addresses and they function a lot like unidirectional mailboxes. If you want to send an invitation for people to come to a party, you write a message and address it to the mailbox of the person you want to invite. When the person receives the message, they read it and return some information, perhaps via some other method (such as a phone call). The I/O addresses (also called I/O ports or hardware ports) work in a similar fashion. When the CPU wants a device to do something, it sends a signal to a particular I/O address telling the device what to do. The device then responds via the data bus or DMA channels. [Pg.197]

Moreover, the connection structure meant by if properly connected is a function of time, in contrast to 2- or multi-party protocols customary in cryptology The same output port of the entity of a signer may be connected to the input port of many different recipients, one after the other. [Pg.52]

The use of LCA results to siq>port comparative assertions raises special concerns and requires critical review since this application is likely to affect interested parties that are external to the LCA study. A critical review may facilitate understanding and enhance the credibility of LCA studies, for example, by involving interested parties. [Pg.376]

Soret C 1879 Sur I etat d equilibre que prend, du point de vue de sa concentration, une dissolution saline primitivement homogene, dont deux parties sont port ees a des temperatures diff erentes Arch. Sci. Phys. Nat. Geneve 248-61... [Pg.3309]

The ambiance of the interview was positive and encouraging. The outlook towards the HSEQ AP being adapted in the port industry was supportive and the benefits from implementing it were discussed in broad terms. The method could be seen as a best available technique because it is considered to bring added value to the field. Increasing cooperation and communication between foiu fields of HSEQ were discussed to be beneficial for all parties involved. [Pg.87]

Host firewalls This software firewall protects ports and services specifically for the device on which it is installed. There are also third party software packages and these are host resident for servers, workstations, laptops, etc. There are various types of host firewalls such as control firewall and stateful inspection firewall, as shown in Fig. Xl/4.1.5-1. Stateful inspection firewall filters at the network layer to determine the legitimacy of the sessions, and evaluate contents of the packets at the application layer. Control firewalls are hardware based directly on the controller to regulate traffic. [Pg.856]

This example demonstrates that a primary client (U.S. citizens) and individual clients and stakeholders (e.g., port, resource agencies, conamer-cial fishers) may have multiple interests at stake in a project—economics, environmental quality, health and safety, etc.— that are sometimes in conflict with each other. Yet a dedicated, ethical approach to balancing interests and resolving differences can produce a project that each party can support. [Pg.47]


See other pages where 3-party port is mentioned: [Pg.123]    [Pg.123]    [Pg.325]    [Pg.130]    [Pg.49]    [Pg.142]    [Pg.875]    [Pg.64]    [Pg.125]    [Pg.18]    [Pg.49]    [Pg.354]    [Pg.15]    [Pg.297]    [Pg.50]    [Pg.78]    [Pg.44]    [Pg.153]    [Pg.158]    [Pg.1810]    [Pg.263]    [Pg.185]    [Pg.124]    [Pg.432]    [Pg.912]    [Pg.36]    [Pg.102]    [Pg.177]    [Pg.177]    [Pg.95]    [Pg.215]   
See also in sourсe #XX -- [ Pg.104 ]




SEARCH



PARTI

Party

Ports

© 2024 chempedia.info