Palladium-catalyzed Oxidations with

The palladium-catalyzed reaction of benzol]quinoline in the presence of PhI(OAc)2 as an oxidant in MeCN gives an 11 1 mixture of 10-acetoxy- and 10-hydroxybenzo[ ]quinolines in 86% yield (Equation (98)).135 This chelation-directed oxidation can be extended to the benzylic C-H bond of 8-methylquinoline. The inactivated sp3 C-H bonds of oximes and pyridines undergo the same palladium-catalyzed oxidation with PhI(OAc)2 (Equation (99)).1... 

The Wacker Oxidation is an industrial process, which allows the synthesis of ethanal from ethene by palladium-catalyzed oxidation with oxygen. Copper serves as redox cocatalyst. 

Fig. 5.10 Palladium catalyzed oxidation with hydrogen peroxide.

Compared with these methods, the palladium-catalyzed oxidation of 1-olefins described here is more convenient and practical. The industrial method of ethylene oxidation to acetaldehyde using PdCl2-CuCl 2-O2 original reaction of this type. The oxidation of various olefins has been carried out. ... 

Use of DMF as a solvent for the oxidation of l-o1efins has been reported by Clement and Selwitz. The method requires only a catalytic amount of PdCl2 and gives satisfactory yields under mild conditions. A small amount of olefin migration product is the only noticeable contaminant in the cases reported. The procedure can be applied satisfactorily to various 1-olefins with other functional groups. This useful synthetic method for the preparation of methyl ketones has been applied extensively in the syntheses of natural products such as steroids,macrolides, dihydrojasmone, and muscone. " A comprehensive review article on the palladium-catalyzed oxidation of olefins has... 

The Boekelheide reaction has been applied to the synthesis of non-natural products with the preparation of quaterpyridines serving as an example. The sequence began with the 2,4-linked bipyridyl-N-oxide 25. Execution under the typical reaction conditions produced the expected bis-pyridone 26. Treatment with POCI3 afforded the corresponding dichloride that was submitted to a palladium-catalyzed coupling with 2-stannyl pyridine to produce the desired quaterpyridine 27. 

Another route to the diol monomer is provided by hydroformylation of allyl alcohol or allyl acetate. Allyl acetate can be produced easily by the palladium-catalyzed oxidation of propylene in the presence of acetic acid in a process similar to commercial vinyl acetate production. Both cobalt-and rhodium-catalyzed hydroformylations have received much attention in recent patent literature (83-86). Hydroformylation with cobalt carbonyl at 140°C and 180-200 atm H2/CO (83) gave a mixture of three aldehydes in 85-99% total yield. 

In most palladium-catalyzed oxidations of unsaturated hydrocarbons the reaction begins with a coordination of the double bond to palladium(II). In such palladium(II) olefin complexes (1), which are square planar d8 complexes, the double bond is activated towards further reactions, in particular towards nucleophilic attack. A fairly strong interaction between a vacant orbital on palladium and the filled --orbital on the alkene, together with only a weak interaction between a filled metal d-orbital and the olefin ji -orbital (back donation), leads to an electrophilic activation of the alkene9. 

Acyclic dienes also undergo the palladium-catalyzed cyclization with the Mn02/BQ oxidation system22. Thus, simple 1,5-hexadiene afforded a 72% isolated yield of cyclized products 18, 19 and 20, with an isomer distribution of 65 25 10, respectively (equation 8). In general, the selectivity and/or yield was lower for the acyclic dienes. 

The palladium-catalyzed oxidation of the 1,2-divinylcyclohexane system was applied to diastereoselective reactions with the use of chiral acids as nucleophiles25. With this technique an asymmetric induction of up to 76% was obtained in the formation of 21 from 14 (equation 9). The use of molecular sieves was essential in order to obtain a good asymmetric induction. 

Palladium-catalyzed oxidation of 1,4-dienes has also been reported. Thus, Brown and Davidson28 obtained the 1,3-diacetate 25 from oxidation of 1,4-cyclohexadiene by ben-zoquinone in acetic acid with palladium acetate as the catalyst (Scheme 3). Presumably the reaction proceeds via acetoxypalladation-isomerization to give a rr-allyl intermediate, which subsequently undergoes nucleophilic attack by acetate. This principle, i.e. rearrangement of a (allyl)palladium complex, has been applied in nonoxidative palladium-catalyzed reactions of 1,4-dienes by Larock and coworkers29. Akermark and coworkers have demonstrated the stereochemistry of this process by the transformation of 1,4-cyclohexadiene to the ( r-allyl)palladium complex 26 by treatment... 

A mild aerobic palladium-catalyzed 1,4-diacetoxylation of conjugated dienes has been developed and is based on a multistep electron transfer46. The hydroquinone produced in each cycle of the palladium-catalyzed oxidation is reoxidized by air or molecular oxygen. The latter reoxidation requires a metal macrocycle as catalyst. In the aerobic process there are no side products formed except water, and the stoichiometry of the reaction is given in equation 19. Thus 1,3-cyclohexadiene is oxidized by molecular oxygen to diacetate 39 with the aid of the triple catalytic system Pd(II)—BQ—MLm where MLm is a metal macrocyclic complex such as cobalt tetraphenylporphyrin (Co(TPP)), cobalt salophen (Co(Salophen) or iron phthalocyanine (Fe(Pc)). The principle of this biomimetic aerobic oxidation is outlined in Scheme 8. 

Palladium-catalyzed oxidative couplings of aromatic compounds with alkenes in air lead to cinnamate products with TONs attaining 280 (Equations (66) and (67)).67,67a,67b... 

Stereo- and regioselective palladium-catalyzed oxidation of 1,3-dienes in acetic acid to give l,4-diacetoxy-2-alkenes has been accomplished using Mn02 and catalytic amounts of p-benzoquinone (BQ)11. The reaction can be made to take place with cis- or trans-1,4-diacetoxylation across the diene in cyclic systems as shown in equation 6. 

Ceric ammonium nitrate promoted oxidative addition of silyl enol ethers to 1,3-butadiene affords 1 1 mixtures of 4-(/J-oxoalkyl)-substituted 3-nitroxy-l-butene and l-nitroxy-2-butene27. Palladium(0)-catalyzed alkylation of the nitroxy isomeric mixture takes place through a common ij3 palladium complex which undergoes nucleophilic attack almost exclusively at the less substituted allylic carbon. Thus, oxidative addition of the silyl enol ether of 1-indanone to 1,3-butadiene followed by palladium-catalyzed substitution with sodium dimethyl malonate afforded 42% of a 19 1 mixture of methyl ( )-2-(methoxycarbonyl)-6-(l-oxo-2-indanyl)-4-hexenoate (5) and methyl 2-(methoxycarbonyl)-4-(l-oxo-2-indanyl)-3-vinylbutanoate (6), respectively (equation 12). 

A molybdenum-mediated oxidative coupling of aniline 1 with cyclohexene 2a provides carbazole 3. Alternatively, the same overall transformation of aniline 1 to carbazole 3 is achieved by iron-mediated oxidative coupling with cyclo-hexa-1,3-diene 2b or by palladium-catalyzed oxidative coupling with arenes 2c. The use of appropriately substituted anilines and unsaturated six-membered hydrocarbons opens up the way to highly convergent organometallic syntheses of carbazole alkaloids. 

Poly(ethylene oxide) polymers and poly(ethylene oxide/propylene oxide) copolymers with iminodipropionitrile (139) or iminodiacetonitrile end groups were used as ligands in the palladium-catalyzed oxidation of higher olefins (1-octene to 1-hexadecene) at 50-70 °C with atmospheric air or 1-3 bar O2. In an ethanol/water mixture 88 % yield of 2-hexanone and 92 % yield of 2-hexadecanone was obtained in 4 and 2 h, respectively, with a... 

In addition to the aforementioned total syntheses. Shannon et al. observed the formation of an N-C3-linked dimer during the transformation of a 3-bromocarbazole to a 3-cyanocarbazole by reaction with copper(I) cyanide in DMF under reflux (668). Harrity et al. reported the synthesis of non-natural (+ )-N,N -dimethylbismurrayafoline A via a chromium-mediated benzannulation, followed by a palladium-catalyzed oxidative coupling reaction (669). 

Abstract Palladium-catalyzed oxidation reactions are among the most diverse methods available for the selective oxidation of organic molecules, and benzoquinone is one of the most widely used terminal oxidants for these reactions. Over the past decade, however, numerous reactions have been reported that utilize molecular oxygen as the sole oxidant. This chapter outlines the fundamental reactivity of benzoquinone and molecular oxygen with palladium(O) and their catalyst reoxidation mechanisms. The chemical similarities... 

Fig. 35. Effect of phase behavior on palladium-catalyzed oxidation of benzyl alcohol to benzaldehyde in supercritical CO2 characterized by transmission- and ATR-IR spectroscopy combined with video monitoring of the reaction mixture (102). The figure at the top shows the pressure dependence of the reaction rate. Note the strong increase of the oxidation rate between 140 and 150 bar. The in situ ATR spectra (middle) taken at 145 and 150 bar, respectively, indicate that a change from a biphasic (region A) to a monophasic (B) reaction mixture occurred in the catalyst surface region in this pressure range. This change in the phase behavior was corroborated by the simultaneous video monitoring, as shown at the bottom of the figure.

---