Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Palladium addition with

Aziridines, like oxiranes, undergo hydrogenolysis easily with or without inversion of configuration, depending on the catalyst, reaction parameters, and various additives 65aJ08). For example, hydrogenolysis of 2-methyl-2-phenylaziridine in ethanol occurs mainly with inversion over palladium but with retention over platinum, Raney nickel, or Raney cobalt. Benzene solvent or alkali favor retention over palladium as well. [Pg.139]

Although, as has already been mentioned, under matrix conditions between 10 and 77 K, there is no oxidative addition of a chloroolefin to nickel or palladium atoms (141), it is evident that this is simply a function of reaction and processing conditions, as it has been shown (68) that oxidative addition to C-C or C-H bonds by nickel atoms leads to pseudocomplexes having Ni C H ratios of 2-5 1 2. Klabunde and co-workers investigated the oxidative addition-reactions of palladium atoms with alkyl halides (73) and benzyl chlorides (74). [Pg.158]

The addition, therefore, follows Markovnikov s rule. Primary alcohols give better results than secondary, and tertiary alcohols are very inactive. This is a convenient method for the preparation of tertiary ethers by the use of a suitable alkene such as Me2C=CH2. Alcohols add intramolecularly to alkenes to generate cyclic ethers, often bearing a hydroxyl unit as well. This addition can be promoted by a palladium catalyst, with migration of the double bond in the final product. Rhenium compounds also facilitate this cyclization reaction to form functionalized tetrahydrofurans. [Pg.996]

The groups R2N and Cl can be added directly to alkenes, allenes, conjugated dienes, and alkynes, by treatment with dialkyl-V-chloroamines and acids. " These are free-radical additions, with initial attack by the R2NH- radical ion. " N-Halo amides (RCONHX) add RCONH and X to double bonds under the influence of UV light or chromous chloride. " Amines add to allenes in the presence of a palladium catalyst. ... [Pg.1045]

Addition-elimination reactions of palladium compounds with olefins... [Pg.457]

Initially we tried the standard approach, reduction of NiL, NiB, or NiC with 2.0 equivalents of potassium in refluxing THF. Finely divided black nickel powders were obtained however, they showed rather limited reactivity toward oxidative addition with carbon-halogen bonds. Similar results were found for palladium and platinum. [Pg.230]

There are few reports of oxidative addition to zerovalent transition metals under mild conditions three reports involving group 10 elements have appeared. Fischer and Burger reported the preparation of aTT -allylpalladium complex by the reaction of palladium sponge with allyl bromide(63). The Grignard-type addition of allyl halides to aldehydes has been carried out by reacting allylic halides with cobalt or nickel metal prepared by reduction of cobalt or nickel halides with manganese/iron alloy-thiourea(64). [Pg.231]

Addition of a phosphorus-sulfur bond to a carbon-carbon triple bond is catalyzed by a palladium(O) complex (Equation (130)).298 Terminal aliphatic alkynes having various functional groups undergo the addition with PhS-P(0)(OPh)2 to afford (Z)-adducts in high yield. In contrast to aliphatic alkynes, phenylacetylene gives a mixture of E Z adducts. Internal alkynes and alkenes are unreactive. [Pg.781]

The mechanism of this reaction was considered on the basis of hydropalladation (Scheme 14). To minimize steric repulsions, the palladium hydride complex approaches the C=CH2 moiety of the allene in the anti-Markovnikov mode from the opposite side of the substituent. This addition gives a 7t—allyl palladium complex with the (Z)-configuration,18 which is converted to the (Z)-product by C-P bond formation, with regeneration of the Pd(0) catalyst. [Pg.498]

Membrane processes are based on the selective transmission characteristics of the membrane material for different molecules, whereby the most effective membranes are usually also the most expensive. For example, the purest hydrogen can be captured by palladium membranes with suitable additives, but their low permeability make it necessary to use large membrane surfaces and high pressures, which result in high costs. [Pg.297]

The hydride cycle starts with palladium hydride and a fast migratory insertion of ethene. Insertion of CO is also a last reaction, enhanced by the preferential coordination of CO with respect to ethene. The product is formed by reaction of propanoylpalladium with methanol which coordinates to palladium cis to the acyl group. A palladium zero complex may form that regenerates palladium hydride via an oxidative addition with a proton. [Pg.259]

Metal chemical shifts have not found extensive use in relation to structural problems in catalysis. This is partially due to the relatively poor sensitivity of many (but not all) spin 1=1/2 metals. The most interesting exception concerns Pt, which is 33.7% abundant and possesses a relatively large magnetic moment. Platinum chemistry often serves as a model for the catalytically more useful palladium. Additionally, Pt NMR, has been used in connection with the hydrosilyla-tion and hydroformylation reactions. In the former area, Roy and Taylor [82] have prepared the catalysts Pt(SiCl2Me)2(l,5-COD) and [Pt()i-Cl)(SiCl2Me)(q -l,5-COD)]2 and used Pt methods (plus Si and NMR) to characterize these and related compounds. These represent the first stable alkene platinum silyl complexes and their reactions are thought to support the often-cited Chalk-Harrod hydrosilylation mechanism. [Pg.20]

This work also shows that, in general, it is more difficult to form ring-closure products with palladium than with platinum. This finding probably can be explained by the greater difficulty in making palladium II) complexes take part in oxidative addition to give the necessary pallad-ium(IV) intermediate. [Pg.154]

Alike olefins, allenes also undergo palladium mediated addition in the presence of N-H or O-H bonds. Although these reactions show some similarity to Wacker-type processes, from the mechanistic point of view they are quite different. Allenes, such as the cr-aminoallene in 3.69., usually undergo addition with palladium complexes (e.g. carbopalladation in 3.69. and 3.70., or hydropalladation in 3.71.), which leads to the formation of a functionalized allylpalladium complex. Subsequent intramolecular nucleophilic attack by the amino group leads to the closure of the pyrroline ring.87... [Pg.54]

Vinyl acetate is produced by the oxidation of ethylene and acetic acid (4,5). Catalysts for the gas phase oxidation are made from palladium compounds with additional metal compounds on a porous support (6). Catalysts, preferably coated catalysts, can be used for many heterogeneously catalyzed reactions such as hydrogenations and oxidations. [Pg.189]

In the case of certain diolefins, the palladium-carbon sigma-bonded complexes can be isolated and the stereochemistry of the addition with a variety of nucleophiles is trans (4, 5, 6). The stereochemistry of the addition-elimination reactions in the case of the monoolefins, because of the instability of the intermediate sigma-bonded complex, is not clear. It has been argued (7, 8, 9) that the chelating diolefins are atypical, and the stereochemical results cannot be extended to monoolefins since approach of an external nucleophile from the cis side presents steric problems. The trans stereochemistry has also been attributed either to the inability of the chelating diolefins to rotate 90° from the position perpendicular to the square plane of the metal complex to a position which would favor cis addition by metal and a ligand attached to it (10), or to the fact that methanol (nucleophile) does not coordinate to the metal prior to addition (11). In the Wacker Process, the kinetics of oxidation of olefins suggest, but do not require, the cis hydroxypalladation of olefins (12,13,14). The acetoxypalladation of a simple monoolefin, cyclohexene, proceeds by trans addition (15, 16). [Pg.100]

One of the earliest uses of palladium(II) salts to activate alkenes towards additions with oxygen nucleophiles is the industrially important Wacker process, wherein ethylene is oxidized to acetaldehyde using a palladium(II) chloride catalyst system in aqueous solution under an oxygen atmosphere with cop-per(II) chloride as a co-oxidant.1,2 The key step in this process is nucleophilic addition of water to the palladium(II)-complexed ethylene. As expected from the regioselectivity of palladium(II)-assisted addition of nucleophiles to alkenes, simple terminal alkenes are efficiently converted to methyl ketones rather than aldehydes under Wacker conditions. [Pg.552]

Whilst, not unexpectedly, the secondary amide 38 failed to undergo a 6-exo trig addition with palladium(0) complex, the corresponding tertiary amide 39 did so, when subjected to Heck reaction conditions, to furnish styrene 40 in good yield. [Pg.447]

With this end in view, phenyldimcthylsilyl tri-n-butylstannane was added under the influence of zero-valent palladium compound with high regioselectivity and in excellent yield to the acetylene 386 to give the metallated olefin 387 (Scheme 56). The vinyl lithium carbanion 388 generated therefrom, was then converted by reaction with cerium(lll) chloride into an equilibrium mixture (1 1) of the cerium salts 389 and 390 respectively. However, the 1,2-addition of 389 to the caibonyl of 391, which in principle would have eventually led to ( )-pretazettine, did not occur due to steric reasons — instead, only deprotonation of 391 was observed. On the other hand, 390 did function as a suitable nucleophile to provide the olefinic product 392. Exposure of 392 to copper(II) triflate induced its transformation via the nine membered enol (Scheme 55) to the requisite C-silyl hydroindole 393. On treatment with tetrafluoroboric acid diethyl ether complex in dichloromethane, compound 393 suffered... [Pg.526]


See other pages where Palladium addition with is mentioned: [Pg.133]    [Pg.37]    [Pg.26]    [Pg.41]    [Pg.39]    [Pg.570]    [Pg.585]    [Pg.191]    [Pg.385]    [Pg.407]    [Pg.74]    [Pg.96]    [Pg.857]    [Pg.141]    [Pg.224]    [Pg.110]    [Pg.211]    [Pg.240]    [Pg.286]    [Pg.1157]    [Pg.99]    [Pg.329]    [Pg.339]    [Pg.343]    [Pg.589]    [Pg.843]    [Pg.893]    [Pg.877]    [Pg.248]    [Pg.214]    [Pg.454]   


SEARCH



With palladium

© 2024 chempedia.info