Packed column diameter

Absorption column packed column, diameter 0.5 m, height 6.0 m, packing height 4.5 m, packing 25 mm ceramic saddles, design pressure 2 bar, material carbon steel. [Pg.282]

Investigator Packing Column diameter (cm) Column length (cm) System... [Pg.282]

Verify the packing size and diameter of the column. Column diameter should be a minimum of 10 times the packing size for random packing. Column diameters smaller than this criterion have a significant risk of excessive liquid and vapor channeling. Select a new packing size as needed. [Pg.737]

For conventional dumped packing column diameter/packing diameter > 15 use 2.5 cm packing for gas flowrates about 250 dm /s use 5 cm diameter packing for gas flowrates > 1000 dm /s ... [Pg.97]

A gas absorber is used to remove 90% of the SOj from a gas stream with pure water. The stream mass fiow rate is 103 kg/min. The gas stream contains 3% SOj by voiume. The minimum iiquid fiow rate was 2450 kg/min. The temperature is 293 K and the pressure is 101.32 kPa. The gas velocity should be no greater than 70% of the flooding velocity, and the randomly packed material is 2 in. Ceramic Intalox Saddles. The liquid mass flow rate is 1.5 times the minimum liquid mass flow rate. Determine the packed-column diameter. [Pg.342]

A feed stream condition is as shown in Figure 7.48, packed-column diameter and height is shown in Figure 7.49. [Pg.371]

Big Chemical Encyclopedia