Oxygen boiling-point

Boiling point of liquid oxygen Boiling point of water Freezing point of zinc Freezing point of silver Freezing point of gold... 

Equilibrium between the liquid and vapor phases of oxygen (boiling point of oxygen) 90.188 -182.962... 

An amended version of the IPTS-68 was adopted in 1975 (Comptes Rendus, 1975). Any measured temperature, T a, was unchanged by that amended version. It differed from the 1968 version only in that an alternative fixed point was introduced (the argon triple point as an alternative to the oxygen boiling point) (see Table I), the specified natural isotopic composition of neon was changed slightly, the reference function for the standard platinum thermometer was given in an improved form,... 

Latent heat of vaporisation of oxygen Boiling point of oxygen Density of liquid oxygen Atmospheric temperature Heat transfer coefficient from the outside surface of the lagging to atmosphere... 

Figure 2.5 shows the boiling points of the hydrides in elements of Groups IV. V, VI and VII. Clearly there is an attractive force between the molecules of the hydrides of fluorine, oxygen and nitrogen... 

The trichloride is obtained as a liquid, boiling point 349 K, when a jet of chlorine burns in phosphorus vapour. Care must be taken to exclude both air and moisture from the apparatus since phosphorus trichloride reacts with oxygen and is vigorously hydrolysed by water, fuming strongly in moist air. The hydrolysis reaction is ... 

It is a gas at room temperature with a boiling point of 128 K. It is a strong oxidising agent, some reactions occurring with explosive violence. Water hydrolyses it slowly at room temperature, but the reaction evolving oxygen is rapid in the presence of a base, and explosive with steam ... 

The melting points and boiling points of carboxylic acids are higher than those of hydro carbons and oxygen containing organic compounds of comparable size and shape and indicate strong mtermolecular attractive forces... 

High purity acetaldehyde is desirable for oxidation. The aldehyde is diluted with solvent to moderate oxidation and to permit safer operation. In the hquid take-off process, acetaldehyde is maintained at 30—40 wt % and when a vapor product is taken, no more than 6 wt % aldehyde is in the reactor solvent. A considerable recycle stream is returned to the oxidation reactor to increase selectivity. Recycle air, chiefly nitrogen, is added to the air introducted to the reactor at 4000—4500 times the reactor volume per hour. The customary catalyst is a mixture of three parts copper acetate to one part cobalt acetate by weight. Either salt alone is less effective than the mixture. Copper acetate may be as high as 2 wt % in the reaction solvent, but cobalt acetate ought not rise above 0.5 wt %. The reaction is carried out at 45—60°C under 100—300 kPa (15—44 psi). The reaction solvent is far above the boiling point of acetaldehyde, but the reaction is so fast that Httle escapes unoxidized. This temperature helps oxygen absorption, reduces acetaldehyde losses, and inhibits anhydride hydrolysis. 

Bmnauer-Emmett-TeUer (adsorption equation) twice daily t-butyloxycarbonyl biochemical (biological) oxygen demand boiling point becquerel... 

Oxygenate Blending octane, 1/2CRON + MON) " Heat of combustion, MJ/ ] Specific gravity Boiling point, °C... 

Physical Properties. Properties of some alkyl peroxyesters are Hsted in Table 13 and the properties of some alkyl areneperoxysulfonates are given in Table 14. Mass spectra (226), total energies, and dipole moments (227) oxygen—oxygen bond-dissociation energies (44,228) and boiling points, melting points, densities, and refractive indexes (44,168,213) have been reported for a variety of tert-huty peroxycarboxylates. 

Phosphorus(III) Oxide. Phosphoms(III) oxide [12440-00-5] the anhydride of phosphonic acid, is formed along with by-products such as phosphoms pentoxide and red phosphoms when phosphoms is burned with less than stoichiometric amounts of oxygen (62). Phosphoms(III) oxide is a poisonous, white, wax-like, crystalline material, which has a melting point of 23.8°C and a boiling point of 175.3°C. When added to hot water, phosphoms(III) oxide reacts violentiy and forms phosphine, phosphoric acid, and red phosphoms. Even in cold water, disproportionation maybe observed if the oxide is not well agitated, resulting in the formation of phosphoric acid and yellow or orange poorly defined polymeric lower oxides of phosphoms (LOOP). 

In the parent unsubstituted ring systems cf. first column of Table 32) replacement of a —CH=CH— group with a sulfur atom has little effect, and replacement of a —CH=CH— group with an oxygen atom lowers the boiling point by ca. 40 °C. 

---