Oxidation states solution

Another reducing titrant is ferrous ammonium sulfate, Fe(NH4)2(S04)2 6H2O, in which iron is present in the +2 oxidation state. Solutions of Fe + are normally very susceptible to air oxidation, but when prepared in 0.5 M 1T2S04 the solution may remain stable for as long as a month. Periodic restandardization with K2Cr20y is advisable. The titrant can be used in either a direct titration in which the Fe + is oxidized to Fe +, or an excess of the solution can be added and the quantity of Fe + produced determined by a back titration using a standard solution of Ce + or... 

Bertini I, Bryant DA, Ciurli S, Dikiy A, Fernandez CO, Luchi-nat C, Safarov N, Vila AJ, Zhao JD. Backbone dynamics of plastocyanin in both oxidation states - Solution structure of the reduced form and comparison with the oxidized state. J. Biol. Chem. 2001 276 47217-47226. 

Anodic-stripping voltaimnetry (ASV) is used for the analysis of cations in solution, particularly to detemiine trace heavy metals. It involves pre-concentrating the metals at the electrode surface by reducmg the dissolved metal species in the sample to the zero oxidation state, where they tend to fomi amalgams with Hg. Subsequently, the potential is swept anodically resulting in the dissolution of tire metal species back into solution at their respective fomial potential values. The detemiination step often utilizes a square-wave scan (SWASV), since it increases the rapidity of tlie analysis, avoiding interference from oxygen in solution, and improves the sensitivity. This teclmique has been shown to enable the simultaneous detemiination of four to six trace metals at concentrations down to fractional parts per billion and has found widespread use in seawater analysis. 

Oxidation states can be used to establish the stoichiometry for an equation. Consider the reaction between the manganate(VII) (permanganate) and ethanedioate (oxalate) ions in acidic solution. Under these conditions the MnO faq) ion acts as an oxidising agent and it is reduced to Mn (aq), i.e. 

Silicon, germanium, tin and lead can make use of unfilled d orbitals to expand their covalency beyond four and each of these elements is able (but only with a few ligands) to increase its covalency to six. Hence silicon in oxidation state -f-4 forms the octahedral hexafluorosilicate complex ion [SiFg] (but not [SiCl] ). Tin and lead in oxidation state -1-4 form the hexahydroxo complex ions, hexahydroxostannate(IV). [Sn(OH) ] and hexahydroxoplum-bate(IV) respectively when excess alkali is added to an aqueous solution containing hydrated tin(IV) and lead(IV) ions. 

With the outer electronic configuration 3d 4s vanadium can attain an oxidation state of -I- 5, but it shows all oxidation states between -I- 5 and -I- 2 in aqueous solution (cf titanium). 

The + 2 oxidation state is achieved by more drastic reduction (zinc and acid) of the -1-5. -I- 4 or -t- 3 states thus addition of zinc and acid to a solution of a yellow vanadate(V) gives, successively, blue [VOfH O) ]", green [VCl2(H20)4] and violet [VfH O)... 

Silver has little tendency to formally lose more than one electron its chemistry is therefore almost entirely restricted to the + 1 oxidation state. Silver itself is resistant to chemical attack, though aqueous cyanide ion slowly attacks it, as does sulphur or a sulphide (to give black Ag S). hence the tarnishing of silver by the atmosphere or other sulphur-containing materials. It dissolves in concentrated nitric acid to give a solution of silver(I) nitrate. AgNOj. 

In the presence of air, it is attacked by potassium cyanide solution, to give the complex dicyanoaurate(I) ion, in which gold has an oxidation state + 1 ... 

Originally, general methods of separation were based on small differences in the solubilities of their salts, for examples the nitrates, and a laborious series of fractional crystallisations had to be carried out to obtain the pure salts. In a few cases, individual lanthanides could be separated because they yielded oxidation states other than three. Thus the commonest lanthanide, cerium, exhibits oxidation states of h-3 and -t-4 hence oxidation of a mixture of lanthanide salts in alkaline solution with chlorine yields the soluble chlorates(I) of all the -1-3 lanthanides (which are not oxidised) but gives a precipitate of cerium(IV) hydroxide, Ce(OH)4, since this is too weak a base to form a chlorate(I). In some cases also, preferential reduction to the metal by sodium amalgam could be used to separate out individual lanthanides. 

The many possible oxidation states of the actinides up to americium make the chemistry of their compounds rather extensive and complicated. Taking plutonium as an example, it exhibits oxidation states of -E 3, -E 4, +5 and -E 6, four being the most stable oxidation state. These states are all known in solution, for example Pu" as Pu ", and Pu as PuOj. PuOl" is analogous to UO , which is the stable uranium ion in solution. Each oxidation state is characterised by a different colour, for example PuOj is pink, but change of oxidation state and disproportionation can occur very readily between the various states. The chemistry in solution is also complicated by the ease of complex formation. However, plutonium can also form compounds such as oxides, carbides, nitrides and anhydrous halides which do not involve reactions in solution. Hence for example, it forms a violet fluoride, PuFj. and a brown fluoride. Pup4 a monoxide, PuO (probably an interstitial compound), and a stable dioxide, PUO2. The dioxide was the first compound of an artificial element to be separated in a weighable amount and the first to be identified by X-ray diffraction methods. 

Source Compiled from Rechnitz, G. A. Controlled-Potential Analysis. Macmillan New York, 1963, p. 49. Electrolytic reactions are written in terms of the change in oxidation state. The actual species in solution depend on the composition of the sample matrix. 

The actinide elements exhibit uniformity in ionic types. In acidic aqueous solution, there are four types of cations, and these and their colors are hsted in Table 5 (12—14,17). The open spaces indicate that the corresponding oxidation states do not exist in aqueous solution. The wide variety of colors exhibited by actinide ions is characteristic of transition series of elements. In general, protactinium(V) polymerizes and precipitates readily in aqueous solution and it seems unlikely that ionic forms ate present in such solutions. 

Table 6 presents a summary of the oxidation—reduction characteristics of actinide ions (12—14,17,20). The disproportionation reactions of UO2, Pu , PUO2, and AmO are very compHcated and have been studied extensively. In the case of plutonium, the situation is especially complex four oxidation states of plutonium [(111), (IV), (V), and (VI) ] can exist together ia aqueous solution ia equiUbrium with each other at appreciable concentrations. 

The extensive hydrolysis of protactinium in its V oxidation state makes the chemical investigation of protactinium extremely difficult. Ions of protactinium(V) must be held in solution as complexes, eg, with fluoride ion, to prevent hydrolysis. 

---