Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Organometallic compounds bases

Another approach to isolate the catalyst from the products is the application of perfluorinated catalytic systems, dissolved in fluorinated media [63], which are not non-miscible with the products and some commonly used solvents for catalysis like THE or toluene at ambient temperature. Typical fluorinated media include perfluorinated alkanes, trialkylamines and dialkylethers. These systems are able to switch their solubility properties for organic and organometallic compounds based on changes of the solvation ability of the solvent by moving to higher temperatures. This behavior is similar to the above-mentioned thermomorphic multiphasic PEG-modified systems [65-67]. [Pg.11]

The classification of metals, their salts, and organometallic compounds, based on the Principle of Hard-Soft Acids and Bases (HSAB) of Pearson [112,116,156-158], is discussed in detail in Sec. 1.2.2. [Pg.41]

BF3-OEt2 reverses the usual anti selectivity observed in tbe reaction of crotyl organometallic compounds (based on Cu, Cd, Hg, Sn, Tl, Ti, Zr, and V, but not on Mg, Zn, or B) with aldehydes (eq la) and imines (eq lb), so that homoallyl alcohols and homoallylamines are formed, respectively. " The products show mainly syn diastereoselectivity. BF3-OEt2 is the only Lewis acid which produces hydroxy- rather than halo-tetrahydropyrans from the reaction of aUyl-stannanes with pyranosides. The BF3-OEt2 mediated condensations of y-oxygenated allylstannanes with aldehydes (eq Ic) and with activated imines (eq Id) affords vicinal diol derivatives and 1,2-amino alcohols, respectively, with syn diastereoselectivity. The activated imines are obtained from... [Pg.27]

Counting the number of donating or accepting electrons between metal atoms and ligand molecules can help you quickly learn to predict the stabilities, shapes, and structures of thousands of different organometallic compounds based on some simple calculations. [Pg.236]

Section 14.14 Organometallic compounds based on transition metals, especially rhodium... [Pg.638]

The transmetallation of various organometallic compounds (Hg, Tl, Sn, B, Si, etc.) with Pd(II) generates the reactive cr-aryl, alkenyl, and alkyl Pd compounds. These carbopalladation products can be used without isolation for further reactions. Pd(II) and Hg(II) salts have similar reactivity toward alkenes and aromatic compounds, but Hg(II) salts form stable mercuration products with alkenes and aromatic rings. The mercuration products are isolated and handled easily. On the other hand, the corresponding palladation products are too reactive to be isolated. The stable mercuration products can be used for various reactions based on facile transmetallation with Pd(II) salts to generate the very reactive palladation products 399 and 400 in rim[364,365]. [Pg.79]

A large number of organometallic compounds are based on transition metals Examples include organic derivatives of iron nickel chromium platinum and rhodium Many important industrial processes are catalyzed by transition metals or their complexes Before we look at these processes a few words about the structures of transition metal complexes are m order... [Pg.608]

The preparation and structure determination of ferrocene marked the beginning of metallocene chemistry Metallocenes are organometallic compounds that bear cyclo pentadiemde ligands A large number are known even some m which uranium is the metal Metallocenes are not only stucturally interesting but many of them have useful applications as catalysts for industrial processes Zirconium based metallocenes for example are the most widely used catalysts for Ziegler-Natta polymerization of alkenes We 11 have more to say about them m Section 14 15... [Pg.610]

The bimetallic mechanism is illustrated in Fig. 7.13b the bimetallic active center is the distinguishing feature of this mechanism. The precise distribution of halides and alkyls is not spelled out because of the exchanges described by reaction (7.Q). An alkyl bridge is assumed based on observations of other organometallic compounds. The pi coordination of the olefin with the titanium is followed by insertion of the monomer into the bridge to propagate the reaction. [Pg.493]

Zirconium tetrachloride is instantly hydrolyzed in water to zirconium oxide dichloride octahydrate [13520-92-8]. Zirconium tetrachloride exchanges chlorine for 0x0 bonds in the reaction with hydroxylic ligands, forming alkoxides from alcohols (see Alkoxides, METAl). Zirconium tetrachloride combines with many Lewis bases such as dimethyl sulfoxide, phosphoms oxychloride and amines including ammonia, ethers, and ketones. The zirconium organometalLic compounds ate all derived from zirconium tetrachloride. [Pg.435]

Low surface energy substrates, such as polyethylene or polypropylene, are generally difficult to bond with adhesives. However, cyanoacrylate-based adhesives can be effectively utilized to bond polyolefins with the use of the proper primer/activa-tor on the surface. Primer materials include tertiary aliphatic and aromatic amines, trialkyl ammonium carboxylate salts, tetraalkyl ammonium salts, phosphines, and organometallic compounds, which are initiators for alkyl cyanoacrylate polymerization [33-36]. The primer is applied as a dilute solution to the polyolefin surface, solvent is allowed to evaporate, and the specimens are assembled with a small amount of the adhesive. With the use of primers, adhesive strength can be so strong that substrate failure occurs during the course of the shear tests, as shown in Fig. 11. [Pg.862]

In more recent years two new types of antifouling composition have been developed, using organometallic compounds as poisons. In one type, based chiefly on vinyl resin and organotin compounds (e.g. tributyltin fluoride), the poison and resin form a solid solution. As the poison dissolves from the surface of the film, more poison diffuses from deeper in the film to... [Pg.654]

Many other kinds of organometallic compounds can be prepared in a manner similar to that of Grignard reagents. For instance, alkyllithium reagents, RLi, can be prepared by the reaction of an alkyl halide with lithium metal. Alkyllithiums are both nucleophiles and strong bases, and their chemistry is similar in many respects to that of alkylmagnesium halides. [Pg.346]

III. Catalysts Based on the Use of Organometallic Compounds of Transition Metals. 184... [Pg.173]

The processes of reversible adsorption of the coordination" inhibitors (including the adsorption of organometallic compounds) result in an increase in the lifetime of the transition metal-carbon bond. It is possible that due to this, in the case of propylene polymerization by two-component catalysts based on TiCU, at low temperatures a long-term increase of molecular weight with time was observed (192,193). [Pg.211]

The magnetic properties of Pu compounds in different oxidation states are reviewed. New measurements on Pu(C8H8)2, PuFi, [(C2Hs)itN]2PuCl6, and [ (C2H5)itN]itPu(NCS)s are presented. The interpretation of the data is based on intermediate, j-j mixed crystal field states and orbital reduction due to covalency. Especially in the case of the organometallic compounds a large orbital reduction is found. [Pg.31]

Pt also have the same metallic valence, 5.78 or 6. Then in 1977 I reconsidered this question (17) with consideration of the observed enneacovalence of transition metals in some of their organometallic compounds and concluded that the metallic valence could become as large as 8.3 for Ru-Rh and Os-Ir alloys. This conclusion was reached by an argument based on the observed bond lengths that I now believe to have been misleading. [Pg.404]

When the antitumor activity of cisplatin was discovered, several research groups started to investigate the possible therapeutic applications of other metal-based, often organometallic, compounds. The organotin(lV) compounds that were first tested were those that were available or easily synthesized, like tri- or diorganotin(rV) halides. [Pg.423]


See other pages where Organometallic compounds bases is mentioned: [Pg.248]    [Pg.58]    [Pg.613]    [Pg.613]    [Pg.201]    [Pg.35]    [Pg.574]    [Pg.217]    [Pg.613]    [Pg.741]    [Pg.212]    [Pg.248]    [Pg.58]    [Pg.613]    [Pg.613]    [Pg.201]    [Pg.35]    [Pg.574]    [Pg.217]    [Pg.613]    [Pg.741]    [Pg.212]    [Pg.338]    [Pg.100]    [Pg.159]    [Pg.588]    [Pg.302]    [Pg.416]    [Pg.588]    [Pg.610]    [Pg.294]    [Pg.1139]    [Pg.1014]    [Pg.174]    [Pg.184]    [Pg.11]    [Pg.649]    [Pg.544]    [Pg.173]    [Pg.178]   
See also in sourсe #XX -- [ Pg.613 ]




SEARCH



Base compounds

Based compounds

Organometallic bases

© 2024 chempedia.info