Organolithium polymer solutions, association

Another complication introduced by the associative properties of organolithium solutions in non-polar solvents is the fact that the alkyllithium initiators are themselves associated and can be expected to "cross associate" with the active polymer chain ends. Thus some of our studies (26) on the effect of added ethyl lithium on the viscosity o -polyisoprenyl lithium solutions in n-hexane support the following association equilibrium... 

The carbonation of polymeric carbanions using carbon dioxide is one of the simplest, most useful, and widely used functionalization reactions. However, there are special problems associated with the simple carbonation of polymeric organolithium compounds. Eor example, when carbonations with high-purity, gaseous carbon dioxide are carried out in benzene solution at room temperature using standard high vacuum techniques, the carboxylated polymer is obtained in only 27-66% yield for PSLi, PILi, and poly(styrene-b-isopre-nyl)lithium. The functionalized polymer is contaminated with dimeric ketone (23-27%) and trimeric alcohol (7-50%)... 

The most direct method of preparing telechelic polydienes utilizes a dilithium initiator which is soluble in hydrocarbon solution [220, 221]. The most expedient method of preparing such a dilithium initiator is to react two moles of an alkyllithium compound with a divinyl compound which will not homopolymerize. Unfortunately, because of the association behavior of organolithium compounds in hydrocarbon media [176-178], many potential systems fail because they associate to form an insoluble network-like structure [221]. Expediencies such as addition of Lewis bases can overcome solubility problems of dilithium initiators, however, such additives tend to produce high amounds of 1,2- and 3,4-microstructures (see Table IV). One exception is the adduct formed from the addition of two equivalents of sec-butyllithium to l,3- i5 (l-phenylethenyl)benzene as shown in Eq. (79) [222,223]. Although this is a hydrocarbon-soluble, dilithium initiator, it was found that biomodal molecular weight distributions are obtained monomodal distributions can be obtained in the presence of lithium alkoxides or by addition of Lewis base additives [224,225].This initiator has also been used to prepare telechelic polymers in high yields [226]. 

---